New to Campaigns? Some common early mistakes that might occur

New to Campaigns? Some common early mistakes that might occur

Hello Marketers,
Welcome back to another post in Marketer's Space.
If you're just getting started with Zoho Campaigns, things can feel exciting and slightly confusing at the same time. You're not alone. Most early frustrations come from setup gaps rather than product issues.

Looking at all the features in the product, many new users tend to run into the same few roadblocks. In this post, we'll breakdown what usually causes trouble (and how to avoid it). Whether you're just setting up your first campaign or refining your existing process, this post will help you build a strong foundation early.

Skipping domain authentication   

Many users start sending campaigns before setting up SPF and DKIM properly. Here's what happens when they skip it:
  1. Emails are visibly sent from "via zcsend.net".
  2. They encounter lower inbox placement.
  3. They result in trust issues in Gmail or Outlook.
Domain authentication isn't optional if you care about deliverability; it should be step one.

What can you do instead?
  1. Add and verify your sending domain inside Zoho Campaigns before launching your first campaign.
  2. Configure SPF and DKIM records in your domain's DNS settings.
  3. Wait for verification confirmation before sending in bulk.
  4. Run a small test campaign after setup to confirm proper alignment.
Authentication issues don't just affect inbox placement; they can also prevent campaigns from going out altogether.

Campaign moves back to draft after sending   

This often happens because one of the final checks fails—like sender verification, mandatory fields, or authentication settings.
Before clicking send, ensure the following:
  1. Your sender email is verified.
  2. Authentication (SPF/DKIM) is properly configured.
  3. You've reviewed the campaign checklist inside the editor carefully.
Most "failure to send" cases are configuration-related, not system errors.

Uploading large or unclean contact lists without preparation   

Many new users decide to import a large database and send a campaign immediately. Others upload lists that haven't been cleaned in months or years. Both situations can quietly hurt performance.
Common issues include:
  1. Importing thousands of old or inactive contacts at once
  2. Sending to contacts who haven't engaged in a long time
  3. Including duplicate entries
  4. Not removing bounced or inactive addresses
What does this lead to?
  1. Low open and click rates
  2. Higher bounce rates
  3. Increased spam complaints
  4. Poor sender reputation
For new accounts especially, this can impact deliverability very quickly.
A better way to approach this is to do the following:
  1. Start with your most engaged contacts.
  2. Gradually increase volume over time.
  3. Remove duplicates and inactive addresses.
  4. Segment your contacts based on engagement before sending.
Good deliverability isn't just about authentication; it's also about list hygiene and sending behavior.

Open rates show zero (especially in Gmail)

Open tracking depends on images being loaded. If the recipient's email client blocks images by default, if privacy protection is enabled (especially on Apple devices), or if images are preloaded differently, the open may not register.
This is common with:
  1. Gmail (especially with image blocking)
  2. Privacy-focused email settings
  3. Apple Mail privacy protection
A sudden drop in open rate doesn't always mean your emails aren't being read.
So what is the fix?
  1. Send internal test emails to see if tracking pixels are functioning.
  2. Use A/B tests to validate subject line performance rather than judging from one send.
  3. Compare trends over a period of time instead judging from one campaign.
Your open rate should be treated as an indicator, not as an exact measurement—because it isn't.

Automation doesn't trigger for everyone   

A common assumption is that once automation is active, it applies to all contacts, and users forget that building automations without testing entry conditions might never yield expected results.
A workflow may look correct, but in reality:
  1. Contacts must meet the trigger conditions.
  2. They must enter the workflow at the correct stage.
  3. Timing filters and status settings matter
This is usually a logic issue, not a bug. So how can you solve it?
  1. Test the workflow using a sample contact before activating it fully.
  2. Double-check entry criteria and filter rules.
  3. Review contact status and segmentation settings.
  4. Use the workflow report to confirm whether contacts entered the automation.

Not testing across devices and email services 

Emails that look perfect in the Zoho Campaigns editor may:
  1. Break in emails formatting/structure.
  2. Stack oddly on mobile displays.
  3. Misalign buttons.
The clear action is to first find out how your email looks via the Preview and Test mode, after which you can always send those test emails from the same section and see the actual results.
You can send such emails to:
  1. Gmail
  2. Outlook
  3. Mobile devices


The editor preview is not a perfectly accurate reflection of the real inbox view, so we always recommend that you test your email campaigns first across different devices and email services before sending them in bulk.

Ignoring spam score or content red flags 

The actual content of your email plays a major role in where it lands.
Common content-related mistakes include:
  1. Using heavy promotional language like "BUY NOW," "LIMITED OFFER," or excessive exclamation marks
  2. Writing subject lines that feel overly aggressive or misleading
  3. Including too many links in a short email
  4. Using shortened URLs
  5. Designing image-only emails with very little supporting text
  6. Embedding large attachments directly in the campaign
Another common oversight is not checking the spam score before sending. Even if the content feels fine, running it through the built-in checks helps identify structural red flags early.
Here's a better approach:
  1. Maintain a healthy balance between text and images.
  2. Keep links purposeful and minimal.
  3. Avoid excessive capitalization and exaggerated claims.
  4. Write subject lines that are clear rather than sensational.
  5. Test-send and review how the email appears in different inboxes.
Sending successful campaigns is all about earning inbox trust through clean structure and responsible messaging.

If you're just starting out, take your time with the setup. A well-configured account will always outperform a rushed campaign.

If you've already encountered one or more of these issues, you're not alone; they're all part of the learning curve. Feel free to share your experiences or additional insights in the comments below. Your input might help another marketer avoid the same roadblock.

Until next time, happy campaigning!

Regards,
Yashwanth S
User Education
Zoho Campaigns Team

    • Recent Topics

    • Customize portal email template

      Can i fetch only first name of the user in portal email template instead of the below code Hi ${User.FULL_NAME}

    • Can't we let users decide which options they'd like to add at embed widget?

      It seems embed widget DOES NOT offer a feature, where users can choose options upon subscribing plans. What Zoho has instead, is that admins have to manually create plan with options. How come no one in Zoho dev team never raised issue about usability

    • Reupload and rename from one field to another field (file upload)

      Hi Everyone, Sorry, i have question to use invoke url for rename and reupload attachments file to another field. Tested on development mode. Zoho C6. Refer to https://www.zoho.com/creator/help/api/v2/upload-file.html look my error notification. Does anyone

    • Printing Multi-Page Reports (PDF Export)

      Hi, I am moving a report from Google's Looker Studio to Zoho Analytics and trying to reproduce the Looker page by page dashboard editing experience. With Google, what you see is what you get when you print to PDF. But I can't seem to create the same experience

    • I NEED TO NUMBER TO TEXT NO HERE

      =NUMBERTEXT NEEED

    • Error: View is not present in the workspace

      When saving a dashboard, user receives a popup with the following error. "View is not present in the workspace" What does this mean or refer to? There is no further insight given.

    • Dear Zoho CEO: Business Growth is about how you prioritise!

      All of us in business know that when you get your priorities right, your business grows. Zoho CRM and Zoho Books are excellent products, but sadly, Zoho Inventory continues to lag behind. Just this morning, I received yet another one-sided email about

    • Bin Locations

      Dear all, I am wondering if someone has the ability to develop the bin locations option for zoho inventory (integrated with zoho books) Regards, Ryan

    • Create and populate a record in an instant: Introducing zero-shot field prompting to Zia's ICR

      A couple of months ago, we upgraded our in-house AI image detection and validation tool, Zia Vision, with intelligent character recognition (ICR). By training Zia with sample images, you could create and enrich CRM records with data extracted from standard

    • How to Prevent Users From Skipping LMS Videos in Zoho People

      How to Prevent Users From Skipping LMS Videos in Zoho People Hello Zoho Developers, In this blog, we will quickly look at how you can stop users from skipping or fast-forwarding videos in Zoho People LMS. Zoho People provides a feature called Disable

    • [Integration Edition] Deluge Learning Series – Custom API with Deluge | November 2025

      We’re excited to conclude this four-month Integration Edition of the Deluge Learning Series: Session 1 – Integrating Zoho Apps with Deluge Using Built-In Integration Tasks Session 2 – Integrating Zoho Apps with Deluge Using invokeURL and invokeAPI Session

    • Tips for Organizing Workflows and Improving Team Coordination in Zoho

      Hi everyone, I’m looking for some general advice on how different teams are organizing their daily work within Zoho’s apps. Our team recently expanded, and we’re trying to streamline how tasks, discussions, and documents are shared so everything stays

    • Prevent user from viewing all records?

      I have a report that is meant to be used by vendors to view only the records that are assigned to them. All the vendor information is stored in a separate application, so I need to call a function to get the current user's ID (not the zoho user ID). The report settings criteria doesn't support using function calls, so instead I'm embedding the report in an html page like this: if (thisapp.Global.CurrentUserIs("Vendor")) {       personID = common.getLoggedInPersonID();       query = "Assigned_Vendor.ID="

    • No Emails Flowing To Zoho TeamInbox

      From today, any emails we send to our TeamInbox addresses fail to be delivered. Our TeamInbox is connected via IMAP to 2 x Zoho Mail accounts. If I log in to those accounts directly via Zoho Mail, I can see all the emails landing in the inbox. The emails

    • Zoho Site pages not displaying in iframes

      I simply want to show a Zoho Site page inside an iframe on another non Zoho website. When testing this across many browsers, the iframe content simply does not appear. IE reports that the host does not allow their content to be displayed in iframes. Very disappointing. Is there a way around this please? Here is the URL of the page I would like to appear in an iframe. http://ips-properties-to-rent.zohosites.com

    • ZUG Meet-ups are back - Across India (December 2025)

      The Zoho User Group (ZUG) meet-ups are back, and this time, we’re travelling across India to reconnect with our amazing community! From Chennai to Delhi, Bengaluru to Mumbai, we can’t wait to meet you all in person and talk everything Zoho SalesIQ, automation,

    • Zoho Inventory as connector in Zoho Creator

      Hello, It doesn't appear that Zoho Inventory is one of the many built in connectors in Zoho Creator? I see that there are non-Zoho inventory applications that have built in connectors such as Cin7, which leads me to believe that I'm missing something

    • Send Zoho Forms Link using Zoho CRM Email Templates

      I have set up Zoho Forms and CRM integration to pre-populate data from Zoho CRM to Zoho Forms. The setup is working fine. I have also created an email template in the Zoho CRM deals module to send Zoho forms links. So when I send an email using that template

    • My go to On Load Client Script - Fast, efficient, and works for ALL profiles; Hides everything except initial fields

      This is my on Load client script that I use for Create pages. I use a modified version for Edit and Display pages which you can create yourself using the same basic structure that I will give you below. First up, the script. Below that will be an explanation

    • Custom Search using HTM+CSS Snippet

      Suppose I wanted to create my own list view using HTML and CSS snippets inside a Page with a custom search input at the top of the list (not the Search snippet). Without Javascript, is there a way to retrieve a user's entry from that search input and

    • Zoho CRM Kiosk Upload Files

      Hello all, We are trying out Kiosks at the moment to see where it can fit best in our business. We are still a bit off in the application but lets say we will sort this out. My question is the following - when I create a Kiosk I can add "File Upload"

    • Double opt-in notifications and customizable confirmation messages for your webforms

      Dear CRM Community, We are excited to announce a major upgrade to our Webforms feature. You can now customize the confirmation message shown to your users who double opt-in from your webform and also customize your confirmation emails when they submit

    • Has Anyone successfully integrated Zoho and Sage Intact?

      Hey all, We’re evaluating Zoho One + Sage Intacct and I’m trying to connect with anyone who has actually implemented the two together.Specifically, I’d love to know: -- Which functions you kept in Zoho vs. Intacct (e.g., Product Catalog, AR/AP, invoicing,

    • Introducing Image Upload Field

      Hello everyone, In this post we will discuss about the benefits and usage of the Image upload field. The field is available for standard and custom modules.  Usage: This field can be used to upload a gallery of images to a record and share the record with peers or customers. The record can be made accessible to users outside of Zoho CRM via Portals, where they can upload the necessary images. Preview, editing, and deleting images: The uploaded images can be directly edited and saved from the record

    • Free webinar alert on November 19 - Email driven strategies - Master personality based styles

      Hello Zoho Community! Want to make email management easier, smarter, and more you? We’ve got just the session for you! Join our interactive, game-based webinar to discover how Zoho Mail adapts to your personality and work style. Learn practical hacks,

    • AI generated meeting notes associated to Account or Deal

      As our organization works to improve efficiency we are looking for a solution to leverage AI to generate meeting notes and then add those notes to a CRM record such as an Account or Deal. I see Zoho has a Notebook AI offering that talks about the ability

    • due date on cheue

      how to handle cheque in zoho books for customers and vendors including due date

    • Conta META desativada. Problema no uso do CRM Zoho e SalesIQ.

      Olá, Habilitei um número Whatsapp no SalesIQ em Agosto/2025 com sucesso. Agora concluí a configuração do Zoho CRM e ao habilitar o Whatsapp, descobri que a conta META foi desativada: Configurar CRM -> Canais -> Mensagem de negócio -> WhatsApp Você não

    • 'Statement of Accounts does not exist' error received, when creating PO using api in Zoho Inventory

      Here is request json -- JSONString = { "date": "2019-09-24", "purchaseorder_number": "PO-6-1", "delivery_date": null, "delivery_org_address_id": 36221200000056XXX, "vendor_id": 362212000000564XXX, "attention": "Testing", "line_items": [{ "unit": "Pieces", "account_id": 36221200000003XXX, "quantity": 1, "item_id": 362212000000049XXX, "tax_type": "", "tax_name": "", "name": "One HD", "purchase_rate": 85, "tax_percentage": 0, "item_total": 85.00, "tax_id": "", "warehouse_id": 362212000000564XXX }] }

    • Zoho Projects API 100 requests/2 min. Limit

      Hi Requesting clarification on the API documentation. "You can invoke or call an API for 100 times in a span of two minutes. If you invoke more than 100 times, the particular API request will be locked for the next 30 minutes. " Does this limit apply

    • Integrate your Outlook/ Office 365 inbox with Zoho CRM via Graph API

      Hello folks, In addition to the existing IMAP and POP options, you can now integrate your Outlook/Office 365 inbox with Zoho CRM via Graph API. Why did we add this option? Microsoft Graph API offers a single endpoint to access data from across Microsoft’s

    • Zoho Projects - Attachments added to Task and Bug emails are not saved

      Hi Projects team, I have been experimenting with emails into projects to create tasks and bugs. I have noticed that attachments added to the emails are not saved to the task or bug. Is this normal behaviour? Thanks, Ashley

    • Zoho Inventory's latest shipping integration updates at a glance.

      Hello Users, We would like to share some important news about our latest improvements in the Shipping integration capabilities of Zoho Inventory that we achieved in 2024 with some of our major integration partners in key editions across APAC, North America,

    • Sorting a list of record acquired from the zoho.crm.searchRecords function.

      This is something for which I'm trying to figure out a straightforward way to do. The searchRecords does a great job fetching me the records that I want. However, in some cases, where it returns multiple records, I want it to sort the returned list by date of creation of that record, so that when I do records.get(0), I get the most recent record.  As an example, here's my sample pseudo code: records = zoho.crm.searchRecords("Clients", "Office_Number:equals:123456"); Now the "records" list above contains

    • Zoho Inventory Custom Field Update

      Hello All, In this post I am describing how can we Update the Custom Field Value in Zoho Inventory. // Get Org ID orgid = organization.get("organization_id"); // Field Value resvp = ifnull(item.get("purchase_rate"),null); // Record ID iid = item.get("item_id");

    • Alphabetically

      How can i arrange alphabetically - (Manage Manufacturer) Field in Item Master 

    • Can i set a default value for country and state in address field in zoho creator?

      Can i set a default value for country and state in address field in zoho creator?

    • Convert HTML to PDF & Send as Email Attachments in Zoho Creator (Deluge)

      This approach is useful for sending welcome letters, instructions, or promotional offers after order creation. // 1. Define the variables using the submitted input customerName = input.Customer_Name1; orderID = input.ID; customerEmail = input.Email_Address; //

    • Redirect after submission is not working after a few submission

      I have setup redirect url correctly and everything works as expected. However, it seems that there's a limit to the number of submissions before the redirect stops working. After the "limit" is reached, the page redirects to a seemingly zoho hosted page,

    • Enhancement Request for Multi-Asset Work Order Feature

      Hello Latha, Thank you for your continued support. The multi-asset Work Order feature is extremely helpful. I did some testing based on our requirements, and during the process, I noticed a few areas where we need your team’s support to improve the feature

    • Next Page