Install and uninstall actions

Install and uninstall actions

Hello Biginners!

In our previous forum post, we explored creating connections - specifically, custom service connections in the Bigin Developer Console. In this post, we'll focus on another feature that can be used in every topping: install actions.

We'll look at what install actions are and when to use them, and then we'll walk through a real-world example where users are notified whenever a topping is installed or uninstalled.

What are install actions?

Install actions are important features of a topping that let you execute custom logic during installation and uninstallation events.

Instead of treating installation and uninstallation as silent background events, the Bigin Developer Console allows you to run your own logic the moment a user installs your topping, updates it, or decides to uninstall it. This logic can be implemented as Deluge functions that are executed automatically based on the installation action.

Primarily, install actions are executed in the following scenarios:
  1. On Installation: This action is triggered when the topping is installed for the first time or when the topping is upgraded. (A topping upgrade refers to a new version of the topping being installed by the organization user.) In both cases, the On Installation action runs to perform the required logic.
  2. On Uninstallation: This action is triggered when the topping is uninstalled or removed from an organization.
Let's look at each of these in detail.

On Installation

The On Installation action is triggered immediately after a topping is successfully installed or updated in a Bigin organization. Conceptually, this is the topping's first run and the right place to perform one-time setup tasks that you don't want users to handle manually.

Note: You can write only one On Installation script per topping. This script is executed only during two key events of the topping: the topping being installed for the first time and an updated version of the topping being installed after publishing changes.

This means the On Installation script is not executed repeatedly. It runs only when the topping is installed or updated, ensuring that setup logic is executed only when it's actually required.

To create an On Installation script, access the Bigin Developer Console, navigate to the Install Actions section in the left panel, and choose Toppings.

You'll be redirected to the Deluge editor where you can write the script for the On Installation action.


In the right panel of the Deluge editor, you'll be able to find the installParamMap which contains important contextual details such as the organizationId, installerId, previousVersion, and other details that are provided by the install action script itself. These keys can be used within your script to perform custom logic based on the installation context.

For more information about the keys that you can use inside the installation script, refer to the install actions documentation.

On Uninstallation

The uninstallation process of a topping will be handled by the On Uninstallation action. This function runs when a topping is removed from an organization.

To create an On Uninstallation script, navigate to Install Actions in the left panel, choose Toppings, and write the script in the On Uninstallation section of the Deluge editor.


In the On Uninstallation action, the installParamMap provides the keys organizationId and installerId. These values indicate which organization the topping is being removed from and which user initiated the uninstallation.

Now that we've explored how both of the install actions work, let's move on to creating a topping using these actions in a real-world scenario.

Let's create a topping with install actions

To understand how install actions work in a real-world scenario, we’ll build a Compliance Notification Topping.

The purpose of the topping is to keep organization administrators of the Bigin account informed about the lifecycle of the topping—specifically when it becomes active and when it's removed from their Bigin account.

In many business environments, it's important for admins to be aware of compliance-related changes and system-level additions. Using install actions in the topping ensures that such notifications are handled automatically, without requiring any manual effort from the user.

To achieve this functionality, we'll rely on both of the install actions:
  1. When a user installs the topping, the On Installation action is triggered, through which an email notification is sent to all active admin users in the organization, informing them that the Compliance Notification Topping has been successfully enabled. Along with this, a compliance checklist document stored in Zoho WorkDrive is also attached to the email.
  2. When the topping is uninstalled, the On Uninstallation action is triggered, sending an email notification to all active admin users in the organization to inform them that the Compliance Notification Topping has been successfully enabled. A compliance checklist document stored in WorkDrive is also attached to the email.
Let's learn how to do this.

Setting up the topping

First, create a topping in the Bigin Developer Center. For detailed instructions on creating a topping, refer to this post on how to create a topping.

After creating a topping and accessing it in the Bigin Developer Console, the next step is to create the required service connections.
A connection for Bigin will be used to fetch admin users from the organization into the topping. In this connection we'll use the scope ZohoBigin.org.ALL, as we need to retrieve the org details of the Bigin account where the topping is installed.

Next, we need a WorkDrive connection because we need to download the compliance checklist file stored in WorkDrive and attach it to the notification email. For the WorkDrive connection, we'll be using the scopes WorkDrive.files.READ and ZohoFiles.files.READ.

For a detailed explanation of creating the default connections, refer to this post.

Once the connections are created, we can write the install action scripts.

Implementing the scripts

When the topping is installed, we need to send an email to all the active admin users with the installation details and the WorkDrive checklist as an attachment.

To begin, navigate to the Install Actions section in the left panel and select Toppings. Under the On Installation tab, we’ll write the Deluge script that needs to be executed when the user installs the extension.

Writing the On Installation script

In our topping, the On Installation script performs the following actions:
  1. Fetches all the active admin users in the organization
  2. Downloads the checklist file from WorkDrive
  3. Sends an email notification to the admin users with the installation details and the checklist file.
  1. topping_name = "Compliance Notification Topping";
  2. // 1) Fetch admin users
  3. resp = invokeurl
  4. [
  5. url :"https://www.bigin.com/developer/docs/apis/v2/get-users.html"
  6. type :GET
  7. connection:"biginplus__biginnewconnection"
  8. ];
  9. // 2) recipient list
  10. stakeholders = List();
  11. usersList = resp.get("users");
  12. if(usersList != null)
  13. {
  14. for each user in usersList
  15. {
  16. email = user.get("email");
  17. status = user.get("status");
  18. if(email != null && (status == null || status.toLowerCase() == "active"))
  19. {
  20. stakeholders.add(email);
  21. }
  22. }
  23. }
  24. // 3) Download WorkDrive file via Download API
  25. header = Map();
  26. header.put("Accept","application/vnd.api+json");
  27. resource_id = "khw4zbab917b7f4774260a06636089ef0074f";
  28. fileResp = invokeurl
  29. [
  30. url :"https://download.zoho.com/v1/workdrive/download/" + resource_id
  31. type :GET
  32. headers:header
  33. connection:"biginplus__zohoworkdriveconnection"
  34. ];
  35. // 4) constructing email
  36. org_id = installParamMap.get("organizationId");
  37. installer_id = installParamMap.get("installerId");
  38. current_time = zoho.currenttime;
  39. subject = "Bigin Topping Enabled: " + topping_name;
  40. message = "";
  41. message = message + "<b>" + topping_name + "</b> was <b>Installed</b>.<br/><br/>";
  42. message = message + "<b>Organization ID:</b> " + org_id + "<br/>";
  43. message = message + "<b>Installed by (User ID):</b> " + installer_id + "<br/>";
  44. message = message + "<b>Time:</b> " + current_time + "<br/><br/>";
  45. message = message + "<b>Business impact:</b> This topping is now active for the organization.<br/>";
  46. //sending the email
  47. if(!stakeholders.isEmpty())
  48. {
  49. sendmail
  50. [
  51. from :zoho.adminuserid
  52. to :stakeholders
  53. subject :subject
  54. message :message
  55. Attachments :file:fileResp
  56. ]
  57. }
For details about the API endpoints and request formats used in this code, refer to the Bigin and WorkDrive API documentation. For the syntax to send emails via a Deluge task, you can refer to this documentation.

Writing the On Uninstallation script

When a user decides to remove the topping, we'll send an email notification to ensure the admins stay informed.
  1. topping_name = "Compliance Notification Topping";
  2. // Fetch admin users
  3. resp = invokeurl
  4. [
  5. url :"https://www.zohoapis.com/bigin/v2/users?type=AdminUsers"
  6. type :GET
  7. connection:"biginplus__biginnewconnection"
  8. ];
  9. stakeholders = List();
  10. usersList = resp.get("users");
  11. if(usersList != null)
  12. {
  13. for each user in usersList
  14. {
  15. email = user.get("email");
  16. status = user.get("status");
  17. if(email != null && (status == null || status.toLowerCase() == "active"))
  18. {
  19. stakeholders.add(email);
  20. }
  21. }
  22. }
  23. org_id = installParamMap.get("organizationId");
  24. uninstaller_id = installParamMap.get("installerId");
  25. current_time = zoho.currenttime;
  26. subject = "Bigin Topping Disabled: " + topping_name;
  27. message = "";
  28. message = message + "<b>" + topping_name + "</b> was <b>Uninstalled</b>.<br/><br/>";
  29. message = message + "<b>Organization ID:</b> " + org_id + "<br/>";
  30. message = message + "<b>Uninstalled by (User ID):</b> " + uninstaller_id + "<br/>";
  31. message = message + "<b>Time:</b> " + current_time + "<br/><br/>";
  32. message = message + "<b>Business impact:</b> This topping is no longer available from now on.<br/>";
  33. if(!stakeholders.isEmpty())
  34. {
  35. //Send email
  36. sendmail
  37. [
  38. from :zoho.adminuserid
  39. to :stakeholders
  40. subject :subject
  41. message :message
  42. ]
Once we've configured both the On Installation and On Uninstallation scripts, we can test and publish the topping. When the user installs the topping, the install actions will be triggered automatically based on the topping's lifecycle events.

Let's walk through what happens at runtime.

What happens when the topping is installed or uninstalled

Upon installation, the user receives an email notification along with the topping checklist attachment as shown below.


When the topping is uninstalled, the user receives an email indicating that the topping has been disabled as shown below:


In this post, we've explored how install actions and uninstall actions give us control over the toppings. We'll cover more features of the Bigin Developer Console in our upcoming posts.

Stay tuned!

    • Recent Topics

    • Support Bots and Automations in External Channels

      Hello Zoho Cliq Team, How are you? We actively use Zoho Cliq for collaboration, including with our external developers. For this purpose, external channels are a key tool since they work seamlessly within the same interface as all of our other channels

    • Form to PDF template

      I am looking to create a Form and when information is inputted, it will merge it into a PDF template we already have. There could be multiple lines in the form and each line inputs information into a new page of a PDF template.

    • Please verify my account

      Hi, We have just launched our website and received media coverage in our country. Hundreds of users are signing up for our platform every day. We would like to send them a welcome email, but we are unable to do so because our ZeptoMail account has not

    • Subject character limit increase

      We have an occasional user case where subject lines exceed 500 characters which is the ZeptoMail imposed limit. While I understand long subject lines are not "best practice", these are particular notification emails with specific information for client

    • Account blocked

      Yesterday I got my Zeptomail account blocked due to too many hard bounces. My account is used exclusively for sending transactional emails (eg. your order has been shipped, a form has been filled, etc) and the sudden blocking impacted hundreds of websites

    • Nested notebooks

      Dear Sir/Madam, I would like to know if it is possible to nest notebooks. It would be very helpful when there are too many, as it would improve organization. Thank you for your response. Best regards.

    • Cannot see correct DNS config for mail after moving domain to another provider

      I have moved my domain from one provider to another and after that zoho mail stopped working (expected). Problem is, zoho mail admin panel still shows (10 hours after move) that all records are correct while I haven't changed anything in my domain DNS

    • Proactive Alert for Existing Open Tickets per Contact / Account

      Hello Zoho Desk Team, Greetings, and hope you’re doing well. We would like to submit a feature request aimed at improving agent awareness and efficiency when handling tickets in Zoho Desk. Use case When an agent opens a ticket (new or existing), it is

    • Ticket resolution field - can you add links, video, and images?

      Seems like the ticket resolution fields is just a text field. Any plans to add the ability to add links, images...the same functionality in the problem description box? I would like to send the customer a link to a KB article, a link to our Wiki, embed

    • Ticket Resolution - Add rich formatting, screenshots and attachments

      The resolution field only allows plain text at the moment. Many of our resolutions involve posting screenshots as evidence, it would be great for us to be able to have rich text formatting, be able to paste screenshots and add attachments in the solution

    • Kaizen #140 - Integrating Blog feed scraping service into Zoho CRM Dashboard

      Howdy Tech Wizards! Welcome to a fresh week of kaizen. This week, we will look at how to create a dashboard widget that displays the most recent blog post of your preferred products/services, updated daily at a specific time. We will leverage the potential

    • Convert Lead Automation Trigger

      Currently, there is only a convert lead action available in workflow rules and blueprints. Also, there is a Convert Lead button available but it doesn't trigger any automations. Once the lead is converted to a Contact/Account the dataset that can be fetched

    • I'm getting this error when I try to link an email to a deal inside the Zohomail Zoho CRM extension.

      When I click "Yes, associate," the system displays an "Oops!! Something went wrong" error message. I have attached a screenshot of the issue for reference.

    • Zoho Sheet - Desktop App or Offline

      Since Zoho Docs is now available as a desktop app and offline, when is a realistic ETA for Sheet to have the same functionality?I am surprised this was not laucned at the same time as Docs.

    • ZOHO add-in issue

      I cannot connect ZOHO from my Outlook. I am getting this error.

    • Marketing Automation

      L.S. Marketing Automation is and has always been part of the Zoho One bundle - according to the information provided on the Zoho Website. Why when I open Marketing Automation do I get the following message?: "Your trial has expired. We hope you enjoyed

    • What's New in Zoho Analytics - January 2026

      Hello Users! We are starting the year with a strong lineup of updates, marking the beginning of many improvements planned to enhance your analytics experience. Explore the latest improvements built to boost performance, simplify analysis, and help you

    • Translation from Chinese (Simplified) to Chinese (Traditional) is not working. It randomly translated. Google Translate accurately but zoho translate is not working at all

      Hi friends, The newly added language for translation. https://www.zoho.com/deluge/help/ai-tasks/translate.html "zh" - Chinese "zh-CN" - Chinese (Simplified) "zh-TW" - Chinese (Traditional) my original text: 郑这钻 (and it is zh-CN) translated traditional

    • The Social Playbook - January edition: Getting started with content creation

      Social media isn’t just about posting some random content. It’s about why certain content works, how brands stand out, and what makes people pause mid-scroll. The Social Playbook is a monthly community series where we break all of that down. Through real

    • Support for Custom Fonts in Zoho Recruit Career Site and Candidate Portal

      Dear Zoho Recruit Team, I hope you're doing well. We would like to request the ability to use custom fonts in the Zoho Recruit Career Site and Candidate Portal. Currently only the default fonts (Roboto, Lato, and Montserrat) are available. While these

    • Adding bank details to the contact through API

      How to add bank-related information to the contact while creating it using API? The account number needs to be encrypted before sending it through API but not sure how to encrypt and get those values. Please guide me in this.

    • Font breakage in Zoho Mail Desktop Lite application for Mac

      Dear Zoho Mail and Workplace Community, With the latest update of macOS Sequoia and macOS Tahoe, there has been font breakages in the email preview of Zoho Mail Desktop Lite application for Mac. This breakage is due to the corruption of the System fonts

    • Feature request - image resizing on sales orders

      I need to be able to show the items on the sales orders, currently the item image shows really small and no way to resize it, need the ability to make the image larger to showcase the product on the pdfs

    • Nueva edición de "Ask The Expert" en Español Zoho Community

      ¡Hola Comunidad! ¿Te gustaría obtener respuestas en directo sobre Zoho CRM, Zoho Desk u otra solución dentro de nuestro paquete de CX (Experiencia del Cliente? Uno de nuestros expertos estará disponible para responder a todas tus preguntas durante nuestra

    • Automation Series: Auto-Notify External Users on Issue Closure

      Hello Folks! In Zoho Projects, you can notify external issue reporters via email when an issue is marked as Closed. This helps the users avoid manual follow-ups and keeps the reporter updated. In this post, we’ll walk through a simple setup using a Web

    • Turn chat conversations into real action with Integration Blocks in Guided Conversations

      When a Guided Conversation fails, it's usually not because the logic is wrong. They fail because the conversation stops moving. A customer starts a chat with a clear goal: report an issue, check a status, or confirm something. At first, the flow does

    • Basic Mass Update deluge schedule not working

      I'm trying to create a schedule that will 'reset' a single field to 0 every morning - so that another schedule can repopulate with the day's calculation. I thought this would be fairly simple but I can't work out why this is failing : 1) I'm based in

    • click to call feature

      I've Zoho CRM and in that i want click to call feature.

    • Can the Product Image on the Quote Template be enlarged

      Hello, I am editing the Quote Template and added ${Products.Product Image} to the line item and the image comes up but it is very tiny. Is there anyway that you can resize this to be larger? Any help would be great! Thanks

    • Creating Parent Child relationship in Accounts

      We have customers with multiple locations, I setup the HQ as an account, then I setup the different sites marking the HQ as the parent to that location. If I then do a Deal for one of the locations, is there a way to show by looking at the parent account

    • Learner transcript Challenges.

      Currently i am working on a Learner Transcript app for my employer using Zoho Creator. The app is expected to accept assessment inputs from tutors, go through an approval process and upon call up, displays all assessments associated with a learner in

    • Client and Vendor Portal

      Some clients like keeping tabs on the developments and hence would like to be notified of the progress. Continuous updates can be tedious and time-consuming. Zoho Sprints has now introduced a Client and Vendor Portal where you can add client users and

    • need a packing list feature

      In our business, goods listed on an invoice are packed in separate boxes and shipped off. for e.g. an invoice may have 10 items. each item could then be packed in different boxes depending on qty of each item. this packing list is as important as the invoice for purposes of shipping documents.  Request you to add this feature asap.

    • #7 Tip of the week: Delegating approvals in Zoho People

      With Zoho People, absences need not keep employees waiting with their approval requests. When you are not available at work, you can delegate approvals that come your way to your fellow workmate and let them take care of your approvals temporarily. Learn more!

    • Admin Tip: Manage sub-domain emails using sub-domain stripping

      As an admin, you may need separate domains for different departments such as sales, support, and marketing. While this approach offers flexibility, creating and managing multiple domains can quickly become overwhelming, especially since each domain requires

    • Quick Copy Column Name

      Please add the ability to quickly copy the name of a column in a Table or Query View. When you right-click the column there should be an option to copy the name, or if you left-click the column and use the Ctrl+C keyboard shortcut it should copy the

    • Ability to Edit YouTube Video Title, Description & Thumbnail After Publishing

      Hi Zoho Social Team, How are you? We would like to request an enhancement to Zoho Social that enables users to edit YouTube video details after the video has already been published. Your team confirmed that while Zoho Social currently allows editing the

    • How do I remove a data source from Zoho Analytics?

      I am unable to find a delte option on a datasource that i put in the system as an error. On teh web it refers to a setup icon but I do not see that on my interface?

    • Add Employee Availability Functionality to Zoho People Shift Module

      Hello Zoho People Product Team, Greetings and hope you are doing well. We would like to submit a feature request to enhance the Zoho People Shift module by adding employee availability management, similar to the functionality available in Zoho Shifts.

    • Bigin, more powerful than ever on iOS 26, iPadOS 26, macOS Tahoe, and watchOS 26.

      Hot on the heels of Apple’s latest OS updates, we’ve rolled out several enhancements and features designed to help you get the most from your Apple devices. Enjoy a refined user experience with smoother navigation and a more content-focused Liquid Glass

    • Next Page