Tip #28 - Plan less and deliver more using WIP limit in Zoho Sprints

Tip #28 - Plan less and deliver more using WIP limit in Zoho Sprints



Hello,

It's been a while since we met with a quick, interesting tip. As the saying goes, "Too much of anything is good for nothing", today the focus is on delivering your outcomes with the right amount of planning. Your plan should be practical, calculative, and achievable for driving a qualitative success. 
 
Laura's plan
 
Laura has a habit of planning her project deliverables before assigning work to her team-mates. Once the plan is finalized, she schedules a general meeting with her team and assigns every member with a list of work items to accomplish. These work items run across different sprints. However, the team fails to accomplish a few of the work items as planned and the project runs overdue. Here, the problem lies in the ‘Planning’ stage where Laura predefined a plan without a proper analysis of her team’s capacity. 

Laura's plan becomes a problem
 
Replanning the same process over and over is cumbersome and your outcome would stand nowhere. Laura's problem is neither related to the work items nor her team members. The problem falls in the  PLAN and not the  DELIVERABLE. 
 
Laura's problem analysis phase

Laura's plan requires an intensive analysis before meeting with her team. She can streamline her analysis with:
  • Release notes: Analyze the total number of resolved and unresolved items in the completed sprints using release notes.
  • Team velocity: Track the average velocity of the team that determines the capacity of the sprint team to accomplish the assigned tasks. 
    • User based velocity: Track the individual user's velocity and determine the number of work items they can accomplish in a sprint. 
  • Cumulative flow diagram: Monitor the status based on the number of work items assigned in each status using the CFD chart. 
Post-analysis - Laura implements the Work In Progres limit (WIP)
 
Each status on the scrum board determines the sprint's success. You cannot add 100 work items in your 'To Do' status and later run them across different statuses. A proper planning of each status is crucial when it comes to delivering a sprint. WIP limit solves Laura's problem.



Using WIP limit
 
Each status can be set with a maximum and minimum value. This will help the team to stay organized. All the status will have a defined amount of work items without getting overloaded. It can also help:
  • If a single user is assigned with more work items in a particular status, the sprint manager can reassign it to the user with minimum work items.
  • If a status is overloaded, you can move items to the least occupied status to keep the balance. (For example, if you've 50 work items in 'In progress' status, you can move a few work items to the 'To do' status to maintain the balance.)
    • Number of work items
    • Number of work items including sub items
    • Number of work items including assignees
    • Number of work items including subitems and assignees 
Laura doesn't have to spend hours of planning, instead she can set WIP limit and deliver a better outcome. If you're a team struggling to organize a predefined plan and run your sprints, use WIP limit and make your work easier than before. 

Before we wind up, we are happy to appreciate the contributor for our previous spotlight. 



PS: Your feedback will help us for the betterment. Please comment your suggestions or queries below, we will get in touch with you. 



      • Sticky Posts

      • Tip #28 - Plan less and deliver more using WIP limit in Zoho Sprints

        Hello, It's been a while since we met with a quick, interesting tip. As the saying goes, "Too much of anything is good for nothing", today the focus is on delivering your outcomes with the right amount of planning. Your plan should be practical, calculative, and achievable for driving a qualitative success.    Laura's plan   Laura has a habit of planning her project deliverables before assigning work to her team-mates. Once the plan is finalized, she schedules a general meeting with her team and

      • Tip # 3- Working on the Scrum board

        Continuing from our Tip #2 on leading to a sprint, let's see how to manage the work items on the Scrum board.  Once you start the sprint your work items are automatically displayed on the Scrum board where you will actually manage the work items. It is a snapshot of the backlog items identified for the current sprint.    The layout of the Scrum board Simply put, the scrum board is just like a physical board with sticky notes on which the work items of the active sprint are displayed.  The scrum board

      • Tip#2- Leading you to a Sprint

        Product Backlog After the user stories are written and finalized, they are sorted to create the Product Backlog for the project during the Backlog Grooming meeting. This is a master list of all the work items that have been identified for the project and sorted by priority. Requirements are not constant during this period.The Product Backlog is dynamic and is an ongoing process. Every user story in the Product Backlog is customer centric. The Product Backlog includes: User centric stories based on

      • Tip #1- Why swimlanes?

        Lanes define a clear path to reach your destination. In Agile, swimlane is one such concept that sets a simple and clear process of the work that you do.   The concept of swimlane can be related to the pool, where the swimmers gather in their respective lanes to start off. Similar to the pool, work items are grouped in different categories. Each category is referred as a lane and is displayed in horizontal format. Swimlanes are effective in categorizing the work items with respective to specific

        • Recent Topics

        • 📣📣 Zoho Bookings - Feature Roadmap 2024

          Hi Everyone, Thank you for all the support you have been showing Zoho Bookings. We had a fabulous 2023, with a bunch of new features and over 60K new users. In 2024, our prime focus will be on user experience, and we have a few vital features coming in

        • Templates when adding a ticket

          Hello, When adding a ticket and crafting a description is it possible to have the templates available? I would like to do it all at once vs creating the ticket then navigating to the ticket to send the initial contact. Thank you,

        • Couldn't connect to host, port: wordpress2224249.home.pl, 143; timeout 10000

          Hey, i get a error up "Couldn't connect to host, port: wordpress2224249.home.pl, 143; timeout 10000" But i tried same passwords and info. to make imap on hotmail. and it works flawlessly. Has to be something with zoho....

        • How to stop workflow running twice on a record

          Hi I have a workflow as below Trigger: Lead record is created/edited - Repeat this workflow whenever a lead is edited is NOT TICKED Condition: When Lead Stage is MQL Action: Reassign Lead, Create Task If the Lead goes into stage MQL, and then it changes

        • Zoho invoice doesn't support Arabic language

          I added a clause in the terms & conditions section in Arabic but it doesn't appear when I sent or print it.

        • Using lookup field in Formula field

          I created the following formula field to get string output based on Lookup field values Lead and Account: if(${Communications.Lead}!='','Lead',if(${Communications.Account}!='','Account','Other')) The syntax seems correct, but I'm still getting an error.

        • Merge Join PDFs Zoho Creator

          Hi all, I have a field where users upload PDF, is it possible to join those pdfs into one with a function or something? Regards.

        • Customize the ticket ID for enhanced ticket tracking

          Hello everyone, Ticket IDs in Zoho Desk are the unique reference numbers that are assigned to tickets when they're created. Agents generally use the ticket ID to locate a particular ticket and to reference a ticket in conversations and feeds. When customers

        • Set a global default filter to All Candidates view

          Hi, Is it possible to set a global filter to the All Candidates view? As a use case would be for off-limit candidates. These are those who are off limits due to previous bad client feedback on performance/behaviour. Ideal use case would be to set these

        • Can't join canal Developers Zoho User

          Hello, I received an invitation to join this channel, but I get an error when I try to join it, and I get the same error when I go to the Zoho Cliq interface > Search for a channel. Is this because I don't have a license linked to this email address?

        • It's time to say goodbye to Zoho Recruit for me.

          Hello, I have been a Zoho Recruit user since 2013. The tool has evolved, with a better UI, new features and so on. The pricing is still a great asset too. BUT, that being said, important features are not coming fast enough. I tried to share my point of

        • Searching for content within courses

          Hello, I have been testing out Zoho One for my company have been exploring Learn. I've noticed that you cannot search for content within a course. You can only locate the title of the course. Example: Course: How to Make Your Bed Chapter: Pillows Lesson:

        • Remove "Additional Information" options from user-created tickets

          I'd like to configure customers to be able to create tickets themselves, with and without logging in. However, I don't want them to set things like the priority or due date. Is there a way to remove these options from the help center when customers create

        • Issue Loading Dynamic Table Fields in Zoho Writer

          I am experiencing an issue while configuring a repeat table in Zoho Writer. When attempting to insert a dynamic table, I receive the following error: "There was a problem loading your dynamic table fields. Please try again in a while." I have already

        • FSM Function not executing

          Good Afternoon, all I am working on a workflow function in FSM and yesterday it was working fine. Now today when I select "Save & Execute" it does nothing. I even tested it with just a info statement and it is not executing. Any help would be greatly

        • Announcing Early Access to "Zoho CRM for Everyone" — A new and exciting update to Zoho CRM

          We are delighted to announce an Early Access to Zoho CRM for Everyone— a truly democratic approach to managing a CRM, gift-wrapped in an exciting and intuitive user interface. Here, multiple teams across an organization can coordinate among each other

        • API - Inactive user

          Hi We have a complex flow set up with an API. Yesterday I needed to inactivate a user who had set up the flow and API- realised after this, then broke the connection so - re-activated the user. The flow now seems not to work when gaining information from

        • Based onthe multipick list value want to Show in the pick list field

          Based onthe multipick list value want to Show in the Single pick list field Database Region is multipick list if it contain Saudi and UAE then region pick list want to show Saudi and UAE Database Region is multipick list if it contain Saudi then region

        • CRM quotes and sub forms.

          Recently upgraded to Enterprise CRM - now some added hopes/questions * In a subform in quotes, if I add a "Percent" field, called Overage for instance. I would expect it to allow me to enter a percent like "10%" and carry the percent forward to formulas

        • Reports - Billable Hours

          Hello, I have been playing around with some of the reports features but haven't yet been able to generate a report outlining Tickets which have been closed, that have billable time entries - defined against customer accounts -  I can run a report showing all tickets closed with billable hours, but this totals everything - however we have multiple accounts (clients) who log tickets (multiple end-users per client so these are all added into their respective account)  I need a report to show the Ticket

        • Add Mileage Tab on Expenses

          Hello, the 'Add Mileage' tab is not visible. How can I enable it? I checked the settings, and my user has admin privileges. I also enabled mileage in the policy, but the 'Add Mileage' tab is still not visible. What could be the issue?

        • Currency transition

          We are using Zoho CRM in Curacao, Dutch Caribbean. Our currency is currently the ANG. Curacao will be transition ing from using the ANG (Antillean Guilder) to using the XCG currency (Caribbean Guilder) on March 31st 2025, see: https://www.mcb-bank.com/caribbean-guilder.

        • Error sending an email

          Hi, I'm trying to send an automated email (receiver is always the same) via Deluge function. It was working perfectly, but yesterday the receiver's mailbox got full and started returning this error: { "data": [ { "code": "NOT_ALLOWED", "details": { "reason":

        • [ Free Webinar] Transform your hiring process with Zoho Recruit's AI tools

          We are conducting a free webinar (on 26th November, 05:00 AM IST - 06:00 AM IST) designed to help you make the most of Zoho Recruit’s AI capabilities and give you a sneak peek into our future roadmap. Why Attend? In this session, you will: Discover how

        • Email signature duplicate

          Hi, For a few weeks, opening the email writer would show an error. After clicking ok, the signature would change slighty (font size, I believe). After that it worked fine, so we thought nothing of it. However, now it no longer shows the error puts the

        • Getting Started All Zoho Desk APIs require these two mandatory fields in the header.

          Hey, according to API Dokumentation, All Zoho Desk APIs require these two mandatory fields in the header. Authorization - Authentication request token orgId -ID of the organization to access. All API endpoints except /organizations mandatorily require

        • ZOHO Work Drive Back Up

          I am looking for a ZOHO Work Drive backup solution. Something that is cloud based. There's lots of these kinds of options for Google Drive and other providers, but I have not seen anything for WorkDrive. Any suggestions?

        • Export PDF File Name

          Is it possible to change the default Zoho .pdf naming scheme for inventory items like quotations? Would like to use the the Subject as the default quote name. Is this possible?

        • Facing issue in getting data through api calls

          I have send data of users and want to get the data oof users but facing issue with one field for that I want help

        • Kaizen #126 - Circuits in Zoho CRM - Part 1

          Hello everyone! Welcome back to another week of Kaizen! Today, we will discuss an exciting topic—Circuits in Zoho CRM. For starters, we will discuss what Circuits are, how beneficial they are for businesses, different views of a Circuit, and the different

        • Google Ads Data is Publicly available in Zoho CRM

          We recently discovered that ALL of the following Google Ads fields are visible to all users in our CRM that have access to either Leads or Contacts modules. Not only is this troubling and inconvenient, it should be unacceptable. It also creates a mess

        • Campaigns workflow emails going to Spam

          Hi Everyone, Does anyone have a solution for workflow emails going to recipients SPAM folders? Our domain is not on any Blacklists, We have our domain authenticated with SPF, DKIM and DMARC all set up and we still have leads who tell us they are not getting

        • Best Way to Integrate a Shared Sales Inbox with Zoho CRM

          I’m setting up a shared email inbox (e.g., sales@mycompany.com) for our sales team and want to integrate it with Zoho CRM Leads and Deals so that multiple team members can collaborate efficiently. Since Zoho CRM doesn’t support IMAP for shared inboxes,

        • Add and Delete Customer Portal user via Deluge

          Using Creator to build an app involving a customer portal. I'm trying to integrate the customer portal for the first time and it is raising questions, mainly because it's new territory. Is it possible to add a new user to the customer portal via deluge? For example, if an existing user invites/refers another potential user to try our app, is there code to automate via deluge, setting up an account ready to go for them? The referral would include their email address, and a workflow would set up the

        • Unexpected Error in Reports (Pivot Chart, Pivot Table)

          Dear Zoho Support Team, I am facing an issue while creating reports (Pivot Chart, Pivot Table, etc.) in Zoho Creator. When I try to access the report, I receive an unexpected error, and an alert message saying "Undefined" appears with the loading UI.

        • Access invoice custom modules data from API

          Hi, I am using $url = "https://www.zohoapis.eu/invoice/v3/invoices"; $opts = ["http" => [method" => "GET",header" => [ "Authorization: Zoho-oauthtoken $accessToken", "X-com-zoho-invoice-organizationid: $orgId" ] ] ]; From my app to retrieve the invoices,

        • Using IMAP configuration for shared email inboxes

          Our customer service team utilizes shared email boxes to allow multiple people to view and handle incoming customer requests. For example, the customer sends an email to info@xxxx.com and multiple people can view it and handle the request. How can I configure

        • Zoho CRM and Google Sync - delete Contacts?

          If I delete a contact in Zoho CRM, will it also be deleted in Google contacts?

        • For Each (Desk Ticket) Loop

          What I need is some sort of "for each" loop functionality in Flow, this doesn't seem to be a thing, but I'm wondering if someone found some sort of workaround? Here's the whole situation: I have a Flow, which is supposed to be triggered by a custom field

        • Turn off/Disable Lead Approval

          Is there a way to disable the need to approve leads? I thought there was but I can't find any reference to it in help, etc. We don't need an approval process for incoming leads at the moment. Thanks.

        • Next Page