Install and uninstall actions

Install and uninstall actions

Hello Biginners!

In our previous forum post, we explored creating connections - specifically, custom service connections in the Bigin Developer Console. In this post, we'll focus on another feature that can be used in every topping: install actions.

We'll look at what install actions are and when to use them, and then we'll walk through a real-world example where users are notified whenever a topping is installed or uninstalled.

What are install actions?

Install actions are important features of a topping that let you execute custom logic during installation and uninstallation events.

Instead of treating installation and uninstallation as silent background events, the Bigin Developer Console allows you to run your own logic the moment a user installs your topping, updates it, or decides to uninstall it. This logic can be implemented as Deluge functions that are executed automatically based on the installation action.

Primarily, install actions are executed in the following scenarios:
  1. On Installation: This action is triggered when the topping is installed for the first time or when the topping is upgraded. (A topping upgrade refers to a new version of the topping being installed by the organization user.) In both cases, the On Installation action runs to perform the required logic.
  2. On Uninstallation: This action is triggered when the topping is uninstalled or removed from an organization.
Let's look at each of these in detail.

On Installation

The On Installation action is triggered immediately after a topping is successfully installed or updated in a Bigin organization. Conceptually, this is the topping's first run and the right place to perform one-time setup tasks that you don't want users to handle manually.

Note: You can write only one On Installation script per topping. This script is executed only during two key events of the topping: the topping being installed for the first time and an updated version of the topping being installed after publishing changes.

This means the On Installation script is not executed repeatedly. It runs only when the topping is installed or updated, ensuring that setup logic is executed only when it's actually required.

To create an On Installation script, access the Bigin Developer Console, navigate to the Install Actions section in the left panel, and choose Toppings.

You'll be redirected to the Deluge editor where you can write the script for the On Installation action.


In the right panel of the Deluge editor, you'll be able to find the installParamMap which contains important contextual details such as the organizationId, installerId, previousVersion, and other details that are provided by the install action script itself. These keys can be used within your script to perform custom logic based on the installation context.

For more information about the keys that you can use inside the installation script, refer to the install actions documentation.

On Uninstallation

The uninstallation process of a topping will be handled by the On Uninstallation action. This function runs when a topping is removed from an organization.

To create an On Uninstallation script, navigate to Install Actions in the left panel, choose Toppings, and write the script in the On Uninstallation section of the Deluge editor.


In the On Uninstallation action, the installParamMap provides the keys organizationId and installerId. These values indicate which organization the topping is being removed from and which user initiated the uninstallation.

Now that we've explored how both of the install actions work, let's move on to creating a topping using these actions in a real-world scenario.

Let's create a topping with install actions

To understand how install actions work in a real-world scenario, we’ll build a Compliance Notification Topping.

The purpose of the topping is to keep organization administrators of the Bigin account informed about the lifecycle of the topping—specifically when it becomes active and when it's removed from their Bigin account.

In many business environments, it's important for admins to be aware of compliance-related changes and system-level additions. Using install actions in the topping ensures that such notifications are handled automatically, without requiring any manual effort from the user.

To achieve this functionality, we'll rely on both of the install actions:
  1. When a user installs the topping, the On Installation action is triggered, through which an email notification is sent to all active admin users in the organization, informing them that the Compliance Notification Topping has been successfully enabled. Along with this, a compliance checklist document stored in Zoho WorkDrive is also attached to the email.
  2. When the topping is uninstalled, the On Uninstallation action is triggered, sending an email notification to all active admin users in the organization to inform them that the Compliance Notification Topping has been successfully enabled. A compliance checklist document stored in WorkDrive is also attached to the email.
Let's learn how to do this.

Setting up the topping

First, create a topping in the Bigin Developer Center. For detailed instructions on creating a topping, refer to this post on how to create a topping.

After creating a topping and accessing it in the Bigin Developer Console, the next step is to create the required service connections.
A connection for Bigin will be used to fetch admin users from the organization into the topping. In this connection we'll use the scope ZohoBigin.org.ALL, as we need to retrieve the org details of the Bigin account where the topping is installed.

Next, we need a WorkDrive connection because we need to download the compliance checklist file stored in WorkDrive and attach it to the notification email. For the WorkDrive connection, we'll be using the scopes WorkDrive.files.READ and ZohoFiles.files.READ.

For a detailed explanation of creating the default connections, refer to this post.

Once the connections are created, we can write the install action scripts.

Implementing the scripts

When the topping is installed, we need to send an email to all the active admin users with the installation details and the WorkDrive checklist as an attachment.

To begin, navigate to the Install Actions section in the left panel and select Toppings. Under the On Installation tab, we’ll write the Deluge script that needs to be executed when the user installs the extension.

Writing the On Installation script

In our topping, the On Installation script performs the following actions:
  1. Fetches all the active admin users in the organization
  2. Downloads the checklist file from WorkDrive
  3. Sends an email notification to the admin users with the installation details and the checklist file.
  1. topping_name = "Compliance Notification Topping";
  2. // 1) Fetch admin users
  3. resp = invokeurl
  4. [
  5. url :"https://www.bigin.com/developer/docs/apis/v2/get-users.html"
  6. type :GET
  7. connection:"biginplus__biginnewconnection"
  8. ];
  9. // 2) recipient list
  10. stakeholders = List();
  11. usersList = resp.get("users");
  12. if(usersList != null)
  13. {
  14. for each user in usersList
  15. {
  16. email = user.get("email");
  17. status = user.get("status");
  18. if(email != null && (status == null || status.toLowerCase() == "active"))
  19. {
  20. stakeholders.add(email);
  21. }
  22. }
  23. }
  24. // 3) Download WorkDrive file via Download API
  25. header = Map();
  26. header.put("Accept","application/vnd.api+json");
  27. resource_id = "khw4zbab917b7f4774260a06636089ef0074f";
  28. fileResp = invokeurl
  29. [
  30. url :"https://download.zoho.com/v1/workdrive/download/" + resource_id
  31. type :GET
  32. headers:header
  33. connection:"biginplus__zohoworkdriveconnection"
  34. ];
  35. // 4) constructing email
  36. org_id = installParamMap.get("organizationId");
  37. installer_id = installParamMap.get("installerId");
  38. current_time = zoho.currenttime;
  39. subject = "Bigin Topping Enabled: " + topping_name;
  40. message = "";
  41. message = message + "<b>" + topping_name + "</b> was <b>Installed</b>.<br/><br/>";
  42. message = message + "<b>Organization ID:</b> " + org_id + "<br/>";
  43. message = message + "<b>Installed by (User ID):</b> " + installer_id + "<br/>";
  44. message = message + "<b>Time:</b> " + current_time + "<br/><br/>";
  45. message = message + "<b>Business impact:</b> This topping is now active for the organization.<br/>";
  46. //sending the email
  47. if(!stakeholders.isEmpty())
  48. {
  49. sendmail
  50. [
  51. from :zoho.adminuserid
  52. to :stakeholders
  53. subject :subject
  54. message :message
  55. Attachments :file:fileResp
  56. ]
  57. }
For details about the API endpoints and request formats used in this code, refer to the Bigin and WorkDrive API documentation. For the syntax to send emails via a Deluge task, you can refer to this documentation.

Writing the On Uninstallation script

When a user decides to remove the topping, we'll send an email notification to ensure the admins stay informed.
  1. topping_name = "Compliance Notification Topping";
  2. // Fetch admin users
  3. resp = invokeurl
  4. [
  5. url :"https://www.zohoapis.com/bigin/v2/users?type=AdminUsers"
  6. type :GET
  7. connection:"biginplus__biginnewconnection"
  8. ];
  9. stakeholders = List();
  10. usersList = resp.get("users");
  11. if(usersList != null)
  12. {
  13. for each user in usersList
  14. {
  15. email = user.get("email");
  16. status = user.get("status");
  17. if(email != null && (status == null || status.toLowerCase() == "active"))
  18. {
  19. stakeholders.add(email);
  20. }
  21. }
  22. }
  23. org_id = installParamMap.get("organizationId");
  24. uninstaller_id = installParamMap.get("installerId");
  25. current_time = zoho.currenttime;
  26. subject = "Bigin Topping Disabled: " + topping_name;
  27. message = "";
  28. message = message + "<b>" + topping_name + "</b> was <b>Uninstalled</b>.<br/><br/>";
  29. message = message + "<b>Organization ID:</b> " + org_id + "<br/>";
  30. message = message + "<b>Uninstalled by (User ID):</b> " + uninstaller_id + "<br/>";
  31. message = message + "<b>Time:</b> " + current_time + "<br/><br/>";
  32. message = message + "<b>Business impact:</b> This topping is no longer available from now on.<br/>";
  33. if(!stakeholders.isEmpty())
  34. {
  35. //Send email
  36. sendmail
  37. [
  38. from :zoho.adminuserid
  39. to :stakeholders
  40. subject :subject
  41. message :message
  42. ]
Once we've configured both the On Installation and On Uninstallation scripts, we can test and publish the topping. When the user installs the topping, the install actions will be triggered automatically based on the topping's lifecycle events.

Let's walk through what happens at runtime.

What happens when the topping is installed or uninstalled

Upon installation, the user receives an email notification along with the topping checklist attachment as shown below.


When the topping is uninstalled, the user receives an email indicating that the topping has been disabled as shown below:


In this post, we've explored how install actions and uninstall actions give us control over the toppings. We'll cover more features of the Bigin Developer Console in our upcoming posts.

Stay tuned!

<<Previous                                                                                                                                                                            Next>>

    • Recent Topics

    • Catalyst DB is insufficient for many use cases

      Hi all: I've been diving deep on full stack application development inside Zoho Catalyst. I've been using catalyst for serverless compute and API gateway for a few years, but I haven't used the DB beyond simple storing of app data. As I was working through

    • Edit a previous reconciliation

      I realized that during my March bank reconciliation, I chose the wrong check to reconcile (they were for the same amount on the same date, I just chose the wrong check to reconcile). So now, the incorrect check is showing as un-reconciled. Is there any way I can edit a previous reconciliation (this is 7 months ago) so I can adjust the check that was reconciled? The amounts are exactly the same and it won't change my ending balance.

    • How to change column headings in pivot table?

      Hi, Is there a way to rename the column headers of a pivot table? Now some the columns are named with value labels: 'SUM of .....'. We would like to rename those headers. As of now we couldn't find any direct solution to adjust the headers, besides copying and reformat. We want to avoid these extra steps. Best, Tiemen

    • Native QuickBooks integration for Zoho CRM: Connecting sales and finance

      Greetings, I hope all of you are doing well. We're excited to announce Zoho CRM's integration with QuickBooks Web, which is designed to synchronize your CRM data with your QuickBooks accounting records and bridge the gap between sales and finance. This

    • Rename system-defined labels in Zoho CRM

      Renaming system-defined labels is now available across all DCs. Hello everyone, Zoho CRM includes predefined system fields across modules to support essential CRM operations. Until now, the labels of these fields were fixed and could not be edited from

    • Report/All Entries Filter Contains to support multiple values

      Hi, I use different fields to filter All Entries before Export, one is the Added Email ID (May soon replace with the new Logged in User Name Field!!), and I want to filter for more than one person, so select "Contains", but I try with a comma seperating

    • Marketing Tip #32: Improve SEO and customer confidence with an FAQ section

      Before making a purchase, customers often have simple questions about delivery times, returns, product usage, or sizing. If they can’t quickly find answers, they may leave your store without buying. Adding a clear FAQ (Frequently Asked Questions) section

    • Zobot with Plugs

      Hello, I am having a problem with Zobot using Plugs. Here is my current flow: When I run the flow, I should immediately see the messages from the initial cards (Send Message cards), then after running the plug, and finally, see the messages after the

    • Zoho Creator é para você? Saiba quando escolher (e quando não escolher) essa plataforma

      Todo mês alguém me pergunta: "Leandro, vale a pena usar o Zoho Creator para o meu projeto?" A resposta honesta é: depende. E neste artigo vou te dar os critérios reais que uso para tomar essa decisão — sem marketing, sem generalização. O que é Zoho Creator,

    • Control Fields on Mobile App

      On the mobile app, how do we control which fields appear on the screen for records that have a related list? In the example below I want the Inspection Stage and Inspection Type fields to appear, not the record owner (Dev Admin). I changed the Inspections

    • Show Zoho Marketing Automation Messages in SalesIQ Chat

      When the same number is used in Zoho Marketing Automation and SalesIQ, campaign messages should be visible inside the SalesIQ chat. Currently, when customers reply to marketing campaign messages, SalesIQ chat owners get confused because they cannot see

    • Switch between multiple LLMs instantly for tailored Zia experiences

      Availability Editions: Professional , Enterprise, Ultimate , CRMPlus , ZohoOne Release Plan: Available for all DCs Hello everyone. Earlier, the Multi-LLM feature supported only one LLM at a time for Zia Record Assistant bot restricting flexibility from

    • Lost the ability to sort by ticket owner

      Hi all, in the last week or so, we have lost the ability to sort tickets by Ticket Owner. Unlike the other columns which we can hover over and click on to sort, Ticket Owner is no longer clickable. Is it just us, or are other customers seeing this too?

    • SalesIQ Chat Owner to CRM Lead Owner Mapping

      There is no proper mapping between the SalesIQ chat owner and the CRM lead owner. When a chat is assigned to an agent, the lead created in CRM is often assigned to a different user, forcing admins to manually change ownership every time. This creates

    • Automatic Email Alerts for Errors in Zoho Creator Logs

      Hello, We would like to request a feature enhancement in Zoho Creator regarding error notifications. Currently, Zoho Creator allows users to view logs and errors for each application by navigating to Zoho Creator > Operations > Logs. However, there is

    • [Webinar] Agentic AI and its influence on analytics and autonomous decision-making

      Analytics is evolving from passive reporting to proactive, intelligent systems. Agentic AI is at the center of this shift, bringing context-aware reasoning, continuous learning, and the ability to act on data in real time. Join this webinar with Michael

    • Zoho One: books and inventory working together

      Hi, I was very pleased when I saw that in Zoho Inventory can now pull the orders from Woocommerce. They are now fed in Inventory as Sales order and with choosing convert invoice as Instant Invoice I am getting the exact data as they appear in Woocommerce.

    • Zoho Forms - Form Availability Redirect Option

      Hi Forms Team, It would be great if there was a redirect URL option on the Form Availability settings. For example, I would like to create a support form which is only available outside business hours and if the current data and time is not Mon-Fri 9-5

    • VAT and Taxes option not available

      Dear ZOHO Team , The VAT and Taxes options in my ZOHO books account not available,I tried to find how to enable or check the way to use this option but unfortunately couldn't find it anywhere ,I'm in UAE ,kindly let me know what to do to solve this issue

    • Syncing zoho books into zoho crm

      I was wondering how I can use zoho books in crm as I have been using them separately and would like to sync the two. Is this possible and if so, how? Thanks

    • Client requests I submit invoices using bill.com

      The title states it all. I have a reoccurring invoice setup for this client who has been manually paying by credit card. We are both experiencing merchant costs/fees. The use of bill.com's direct deposit is not far removed from Zoho's, only the client

    • Zoho Inventory Feature Roadmap Visible To All

      Hello, please consider making your feature roadmap visible to us users so that we know what to expect in future. This may appease current users who are seeking clarification on feature implementation dates, so that they can make an informed decision whether

    • Can't Remove Payment Gateway

      I am getting the error "Settings cannot be cleared as some of the transactions are still in progress." when trying to remove the PayGate payment gateway which I was unable to get working. I am now using paystack and I want to remove Paygate.

    • Improve Zoho Vault search

      Hello, we started using Zoho Vault and we really appreciate the app. At the moment, when searching passwords, the search query only targets the password name. I think having the query search among Name, User name, URL, Notes and Tag would be a better

    • New in WorkDrive: Personalize your file system with Labels

      Data is the driving force behind every decision made by businesses today. We at WorkDrive know every employee needs reliable access to their information and be able to locate the data they need at the right time.  Introducing Labels: organize your files in a way that's personal to you.  While WorkDrive's Data Templates feature focuses on adding structure to your organization's data, Labels help your team members classify files based on their preference. The Labels created will appear only to the

    • Custom Buttons & Links Now Supported in Portals

      We’ve just made portals in Zoho Recruit more powerful and customizable than ever! You can now bring the power of Custom Buttons and Links to your Candidate, Client, Vendor, and Custom Portals, enabling portal users to take direct action without recruiter

    • No Ability to Rename Record Template PDFs in SendMail Task

      As highlighted previously in this post, we still have to deal with the limitation of not being able to rename a record template when sent as a PDF using the SendMail Task. This creates unnecessary complexity for what should be a simple operation, and

    • Integrate your Outlook/ Office 365 inbox with Zoho CRM via Graph API

      Hello folks, In addition to the existing IMAP and POP options, you can now integrate your Outlook/Office 365 inbox with Zoho CRM via Graph API. Why did we add this option? Microsoft Graph API offers a single endpoint to access data from across Microsoft’s

    • Work Type Section in Field Service Settings

      Hello Team, We are trying to understand how skills are managed in the system. During our review, we found an article mentioning a section called Work Type, which is used to manage skill assignment. According to the documentation, this section should be

    • Mirror Component in Zoho CRM: Access real-time related data without leaving your record

      Hi everyone, This feature is now available for the JP, CA, SA, UAE, and AU DCs. We're excited to bring to you Zoho CRM's mirror component, which presents relevant data on a record's details page and keeps everything users need in one place without having

    • Clone a Module??

      I am giong to repurpose the Vendors module but would like to have a separate but very similar module for another group of contacts called Buyers. I have already repurposed Contacts to Sellers. Is it possible to clone (make a duplicate) module of Vendors

    • Is there lead tracking in Bigin? There should be.

      Is there a way to track leads before they are ready to be added to Pipelines? I'm afraid we're going to lose opportunities. Example: We're sending out small batches of 25 emails to those we collected at tradeshows. They are all qualified leads. Out of

    • How to get static reports via Desk API

      Hello, we are hoping to use the Desk API to automatically export the default static reports in Zoho Desk, or reconstruct them via other API calls. What's the best way to do this? For example, if I want to recreate the Response Time static report via the

    • Product updates in Zoho Workplace applications | April 2026

      Hello Workplace Community, Let’s take a look at the new features and enhancements that went live across all Workplace applications for the month of April. Zoho Mail Enhance group member exports with additional data fields Customize your group member exports

    • Billing Status Update

      Hello Latha, I’m working on a new automation (deluge) to fulfill one of our requirements. In this automation, there is a step to update the Work Order billing status from “Not Yet Invoiced” to “Non-Billable.” I tried to find the API information relevant

    • Zoho Projects Coming to CRM Teamspaces

      Availability: The US DC Standard Edition is now available. It will be rolled out to customer accounts in all DCs in phased manner. Hello all, You are probably already familiar with Teamspaces, the dedicated workspaces where teams organize the CRM modules

    • Customise Lead Source and Sub Lead Source per webinar

      We have an integration between Zoho Meeting and Zoho CRM. New leads are imported into CRM but now they all have the source "Zoho Webinar". Can I change this source? Can I add a sub source? And can I customize these fields per webinar? (So different webinars

    • Zoho Projects Roadshows 2026 - APAC

      Dear Users, Building on the amazing response to our roadshows in 2025, we are excited to announce our next set of roadshows in the APAC region. To start with, our team of experts will conduct these events in Singapore and Manila. They will walk you through

    • how do i add more than one google my business location?

      they are connected to one account, but while connecting social channels it makes me pick one location. I have 3 and growing.

    • Notes - Reaction Buttons

      Using the native notes option within CRM is fine, it works and the RTF features are great, however, would it be possible - if there isnt already something in place, where we can add a reactions button, similar to teams/whatsapp to show that its been read

    • Next Page