Use action responses across your kiosks with sequential actions

Use action responses across your kiosks with sequential actions

Hello Everyone,

Imagine building a kiosk that gives you full control over how actions are executed in later screens in that same kiosk. What if you could use data from a previous action later in that kiosk—with no interruptions or data gaps? This is exactly what sequential actions bring to Kiosk Studio in Zoho CRM.

Sequential actions enable you to use action responses in subsequent screens or components in your kiosk. With this enhancement, kiosks can now wait for one action to complete before moving to the next step, enabling you to use the response of that action in later screens or components.

Here's a quick example:

Let's say your first step in the kiosk creates new records. With sequential actions enabled, your kiosk waits for those records to be created and then makes them available in the next step. For example, once a new lead is created, you can immediately schedule a meeting for that lead or create a task for that record owner in subsequent screens. You can also use these new records in decision components, pass them on to another action, or trigger follow-ups without any manual setup. 

What's new? 

  1. Wait for completion: This option tells your kiosk to wait until an action is completed to ensure its response can be used in the next screen.
  2. KioskRecords: This combines GetRecords, CurrentRecords, and CreatedRecords into a single grouped view for easier access. 
  3. CreatedRecords: This option displays the list of new records created through Kiosk actions. 
  4. Kiosk Fields: This merges screen fields and action fields under one unified section for simpler configuration. 

How sequential actions can improve your kiosks

Wait for completion

To enable sequential actions for your kiosks, you must switch on the "Wait for completion" toggle. Once enabled, the kiosk will wait until the action is completed before showing users the next screen, where they can use the appropriate action responses.


By default, most actions will have this option automatically enabled. The actions for which this option needs to be manually enabled are as follows:
  1. Activities (tasks, calls, and meetings)
  2. Create record
  3. Webhooks
  4. Functions
If this option is not enabled, kiosks will be executed in parallel, without waiting for actions to be completed. Those action responses cannot be used in subsequent screens. 

Add failure path (optional) 

Enabling sequential actions for kiosks will give users the choice to add a failure path if needed. This is optional and visually different from the success path, as shown in the screenshot below.

When we enable the "Wait for completion" action, users can enable a failure path in case the action fails during execution. When enabled, the kiosk will display two paths: a success path and a failure path. You can then define the next steps in each case.

Message on load 

While actions like webhooks and functions are being executed, you can display customized messages to users.

Let's go through the use case below to see how sequential actions work in kiosks. 

Use case: Pass function outputs in subsequent screens                                                                                                                            

Let's say you want to add new leads through functions to your Zoho CRM account. Create the function to capture new lead records and save it. The output of this function will be the record IDs of newly created leads.

With sequential actions enabled, the kiosk will wait for the function to finish and produce its output (i.e., the new record IDs will be available in the next screen). The returned outputs (record IDs)become action fields in your kiosk. In this use case, we'll schedule a demo for newly created records in the subsequent screen. We'll first use the GetRecords component to get the record IDs from the function. Then we'll configure the Create Record action with GetRecords as a lookup. Finally, we'll set up the Activities action to schedule a meeting for the new record IDs.

This makes it easier to build dynamic flows that depend on real-time outputs from functions or external APIs.

Check out the video below to learn how you can use custom function outputs in a GetRecords component to fetch and display new records (via functions), and how you can schedule a demo for those records.



Now that you understand how sequential actions work in kiosks, it's time to learn about the new components and fields we've added to kiosks as a result of this new feature. 

New components in Kiosk Studio

→ KioskRecords and CreatedRecords 

With sequential actions, newly created records from the Create Record action can be displayed through CreatedRecords. To simplify your setup, GetRecords, CurrentRecords, and CreatedRecords are now grouped under a single category: KioskRecords. This gives you a unified view of all record-related options in one place.

CreatedRecords in decision components 

Currently, while configuring a decision component, you can only add conditions based on GetRecords and CurrentRecords.

With sequential actions, you can now configure a decision component by adding conditions based on CreatedRecords as well. Click KioskRecords and choose CreatedRecords to add your conditions.

CreatedRecords in action components 

You can now configure actions based on CreatedRecords in Kiosk Studio. Simply select the action you want to configure, select the record type as CreatedRecords, and complete the configuration.

Let's say you want to update a field in a created record. You can configure the Update Field action, select CreatedRecord as the record type, and configure which field needs to be updated.

Similarly, you can use CreatedRecords in various action components in kiosks. 

→ Kiosk Fields 

Previously, you could only use screen fields in your actions or create different paths in decision components.

Now you can use both screen fields and action fields under one section called Kiosk Fields, making it easier to manage all available inputs in your Kiosk setup.

Sequential action specifications

Here are some additional details related to configuring sequential actions in Kiosk Studio:
  1. You can add up to three sequential actions from webhooks and functions between the two screens in a kiosk or between the start and end state of a kiosk.
  2. The execution wait time for webhooks and Deluge functions is 10 seconds. If the action takes longer, it will be considered as having failed and will be moved to the failure path (if configured). The action will still be executed, but its response will not be available in later screens.
  3. The maximum number of fields that can be created for webhooks and Deluge functions is 25.
  4. If errors like sockettimeout, threadtimeout, or connecttimeout occur while webhook or Deluge functions are being executed, the action will be considered as having failed and will be move to failure path (if configured).
  5. Only JSONObject responses from webhooks and functions are supported.
  6. JSONArray is not supported for sequential actions.
  7. The string returnType is only supported in functions. Thus, the JSONObject response has to be parsed and sent as a string from the action.
Sequential actions are designed to make kiosks smarter, faster, and more connected, and to help you create dynamic, data-aware experiences that respond in real time.

We're sure this valuable addition to Kiosk Studio will provide users with greater control to create smoother flows. If you have any questions regarding this enhancement, please comment below and we'll get back to you at the earliest.

Thanks & Regards,
Serena Woolridge


    • Recent Topics

    • How to use filters on all products page? Or even a category page?

      Hello, I am trying to create some filters so users can use filters to find products they are looking for. So what i am trying is to create a filter according to price lets say. So if i define it this way i am expecting to see this filter option on category

    • audio and video comments in tasks in zoho projects

      Hi, is it planned to have the ability to post audio and video comments? the whatsapp wechat format of communicating is a reality... tools like zoho project would facilitate a lot teamwork by facilitating the way in which we can give feedback in audio and video rather than only text. thx!

    • Zoho Projects app update: Voice notes for Tasks and Bugs module

      Hello everyone! In the latest version(v3.9.37) of the Zoho Projects Android app update, we have introduced voice notes for the Tasks and Bugs module. The voice notes can be added as an attachment or can be transcribed into text. Recording and attaching

    • Boas práticas de desenvolvimento em Deluge

      O Deluge (Data Enriched Language for the Universal Grid Environment) é a linguagem de script utilizada em diversas aplicações do ecossistema Zoho, como Zoho Creator, Zoho CRM, Zoho Books e Zoho Flow. Ela foi projetada para permitir automações rápidas

    • Zoho Books | Product updates | February 2026

      Hello users, We’ve rolled out new features and enhancements in Zoho Books. From Advanced Reporting Tags to the ability to mark projects as completed, explore the latest updates designed to improve your bookkeeping experience. Introducing Advanced Reporting

    • Send emails directly via Cases module

      Greetings all, The ability to send emails from the Cases module, which users have been eagerly anticipating, is now available, just like in the other modules. In Zoho CRM, Cases is a module specifically designed for managing support tickets. If your organization

    • Seeking a WhatsApp Business App (not API) Zoho CRM integration

      We have a business need to integrated WhatsApp Business App (not API) into Zoho CRM to centrally manage communications between our Sales team and Leads & Contact. Is there a reputable integration available for this scenario of ours? Core features we would

    • Zoho Sign 2025–2026: What's new and what's next

      Hello! Every year at Zoho Sign, we work hard to make document signing and agreement execution easy for all users. This year we sat down with our head of product, Mr. Subramanian Thayumanasamy, to discuss what we delivered in 2025 and our goals for 2026.

    • Force mandatory entry on one of two fields on Contacts

      We are finding our users aren't always entering a phone number or email address of a contact.  We would like to make these fields mandatory but realize they won't always have both pieces of information, but should at least have one. Is there a way to make either the Phone number OR Email Address fields mandatory on the Contacts screen.  We want to make sure they fill in at least one of those fields. Is this possible?

    • Removing To or CC Addresses from Desk Ticket

      I was hoping i could find a way to remove unnecessary email addresses from tickets submitted via email. For example, a customer may email the support address AND others who are in the helpdesk notification group, in either the TO or CC address. This results

    • Error AS101 when adding new email alias

      Hi, I am trying to add apple@(mydomain).com The error AS101 is shown while I try to add the alias.

    • Intergrating multi location Square account with Zoho Books

      Hi, I have one Square account but has multiple locations. I would like to integrate that account and show aggregated sales in zoho books. How can I do that? thanks.

    • Is there a way to configure dark mode for Campaigns emails that go out to customers?

      I've found a lot of information on how to configure dark mode for my (The user) personal Zoho workspace and email, but is there any way to edit dark mode settings on emails that we send out to customers via campaigns?  We sent out a test email the other

    • Can I hide empty Contact fields from view?

      Some contacts have a lot of empty fields, others are mostly filled. Is there a way I can hide/show empty fields without changing the actual Layout? I would like to de-clutter my view, and also be able to add information later as I am able. I would be

    • CRM x WorkDrive: We're rolling out the WorkDrive-powered file storage experience for existing users

      Release plan: Gradual rollout to customers without file storage add-ons, in this order: 1. Standalone CRM 2. CRM Plus and Zoho One DCs: All | Editions: All Available now for: - Standalone CRM accounts in Free and Standard editions without file storage

    • Auto-publish job openings on my Zoho Recruit Careers Website

      I have developed a script using the Zoho Recruit API that successfully inserts new jobOpening records to my Zoho Recruit website, but my goal is to auto-publish to the Careers Website. The jobOpening field data shows two possible candidates to make this

    • Zoho Recruit - Email Relay

      Good day, Has anyone succeeded in setting up an email relay for Office 365? If I add the details from https://support.microsoft.com/en-us/office/pop-imap-and-smtp-settings-8361e398-8af4-4e97-b147-6c6c4ac95353, I get the connection error. Regards, Eka

    • Credit Card Terminal for Zoho Books

      Hello, Instead of punching the credit card number manually for customer payment, do you have a third-party hardware credit card reader that works with Braintree? Thank You

    • How do you print out the invoices comments

      I have some invoices where i need to print out the comments that show when reminders and etc were sent how do we print those out in Zoho Books.

    • Feature Request: Enable Custom PDF Layout Editor for All Modules (Including Package Slips)

      Hello Zoho Community and Product Team, I am writing to share a suggestion that would significantly enhance the customization capabilities within Zoho Books. We all appreciate the power of the Custom PDF Layouts (the "New" template engine) that allows

    • Need advice for product/item search functionality when adding invoices.

      My client uses "Catalog or Vendor" name and Product code to search for his items. But Zoho only allow to search by product name and SKU when adding items to Invoices/Estimates. Clients product codes are not unique as they may overlap from different catalogs/vendors.

    • How to dynamically pass IDs from one API response to a second API call in Zoho DataPrep?

      Hi Team, I am setting up a global consolidated reporting pipeline in Zoho Analytics (India) using Zoho DataPrep as the ETL engine. I am pulling data from multiple Zoho Books Data Centers (US, Singapore, India) thats why i used the URL Source (OAuth 2.0)

    • Please can the open tasks be shown in each customer account at the top.

      Hi there This has happened before, where the open tasks are no longer visible at the top of the page for each customer in the CRM. They have gone missing previously and were reinstated when I asked so I think it's just after an update that this feature

    • Zoho Recruit -> Exchange Online Relay

      HI! I have tried to connect Recruit to our MS 365 Exchange Online without any luck. I use this guide https://help.zoho.com/portal/en/kb/recruit/outreach/email-relay/articles/email-relay-zoho-recruit#Configuring_Email_Relay_Settings Do anyone have the

    • Feature Request: "Send Invitation" Toggle for Events

      I am writing to request a critical "Quality of Life" update for the Activities module. Currently, adding people to the Participants field in an Event triggers an automatic email invitation/acceptance tracking with no way to opt-out. For general events

    • Account Review Pending - Daily Limit 100

      Hi ZeptoMail Team, I'm writing to request a manual review of my account. I am currently stuck on the 100-email daily limit and cannot purchase credits. Status: My domain is already verified (DKIM/CNAME). Issue: The "Customer Validation" option is no longer

    • Automation Series: Move Tasks to a different Task List on Status Change

      In Zoho Projects, you can automatically move a task from one task list to another when its status is updated. This keeps your tasks organised and ensures better visibility while reducing manual work. For instance, during a product launch, the marketing

    • Introducing Bigin's all new integration with Microsoft Teams

      Picture this: You are on call with your team to discuss some important deals that need to be closed soon. While discussing each deal, your team has to switch back and forth between your Teams account and Bigin account to refer to details about the deal.

    • Scaling the customer journey: What's new in CommandCenter

      Dear Customers, The last time we connected about CommandCenter, it was about the tool's new controls and revamped UI. Personally, the overhaul of the UI from the last update, still excites me. Today, we're here with news about its scalability and added

    • Adjusting Physical Inventory

      Not getting very far with support on this one, they say they are going to fix it but nothings happened since November. Please give this a thumbs up if you would like to see this feature or comment if you have some insight. Use Case: Inventory set to be

    • Dynamic Remaining Quantity in Lookup During Allocation

      Hi everyone, From what I understand in Zoho Creator, lookup fields only display the stored value from the source record and do not dynamically update while a form is being filled. Because of this, showing a real-time updated remaining quantity inside

    • Is it possible to use HTML formatting in SMS messages sent from Zoho?

      Hi everyone, I have a question regarding sending SMS from Zoho When we send emails from Zoho, we can include HTML code to format the message (like adding links, styling, etc.). Is it possible to do something similar when sending SMS messages through Zoho

    • Important update: Migrate to the new SalesIQ live chat widget before April 14, 2026

      This is a final reminder to migrate to the new SalesIQ Live Chat Widget before April 14, 2026. The old live chat widget will be deprecated after this date. To continue providing a faster and more engaging chat experience, we recommend upgrading to the

    • If your IM chats aren’t auto-assigning, here’s what to check

      Hey everyone! We’ve been seeing quite a few questions around Instant Messaging (IM) Chat Routing in Zoho Desk, especially around how it actually behaves in real time. So I thought I’d share a practical breakdown of what’s happening behind the scenes.

    • connect zoho creator with google drive

      Hello everyone, I need to connect to a folder drive. The idea, is that google drive loads a text document with some data, I must read that text document to be able to autofill a form that I have in zoho creator with that data. I also attach PDFs and place

    • Uploaded files are not included when using "Include user submitted data" in Email Notification

      In Send Email notification workflow in Zoho Creator, there is an option called "Include user submitted data" which allows the email to contain all the form submission details. However, when this option is enabled, files or images uploaded through File

    • Extend Zoho Canvas Customization to Zoho Creator Forms and Reports

      Currently, Zoho Canvas allows users to design and customize the UI of Zoho CRM modules with a much better visual experience. This helps organizations create cleaner layouts, improve usability, and design interfaces that match their workflows. However,

    • Kanban View for Projects.

      At our organization, we describe active projects with various statuses like "In Proofing" or "Printing" or "Mailing". In the Projects view, one can set these project statuses by selecting from the appropriate drop-down. While this works, it's difficult to view and comprehend the progress of all of your projects relative to each other in a table. Creating a Kanban view for projects where I can move them from one status to another allows me to see where each project is in the order of our workflow.

    • Option to Automatically Publish Job Openings to the Career Website via API or Workflow

      Currently, when creating Job Openings using the Zoho Recruit API, the records are successfully inserted into the system. However, there is no way to automatically publish these Job Openings to the Career Website. In the Job Opening field data, there are

    • Request to Customize Module Bar Placement in New Zoho CRM UI

      Hello Support and Zoho Community, I've been exploring the new UI of Zoho CRM "For Everyone" and have noticed a potential concern for my users. We are accustomed to having the module names displayed across the top, which made navigation more intuitive

    • Next Page