Install and uninstall actions

Install and uninstall actions

Hello Biginners!

In our previous forum post, we explored creating connections - specifically, custom service connections in the Bigin Developer Console. In this post, we'll focus on another feature that can be used in every topping: install actions.

We'll look at what install actions are and when to use them, and then we'll walk through a real-world example where users are notified whenever a topping is installed or uninstalled.

What are install actions?

Install actions are important features of a topping that let you execute custom logic during installation and uninstallation events.

Instead of treating installation and uninstallation as silent background events, the Bigin Developer Console allows you to run your own logic the moment a user installs your topping, updates it, or decides to uninstall it. This logic can be implemented as Deluge functions that are executed automatically based on the installation action.

Primarily, install actions are executed in the following scenarios:
  1. On Installation: This action is triggered when the topping is installed for the first time or when the topping is upgraded. (A topping upgrade refers to a new version of the topping being installed by the organization user.) In both cases, the On Installation action runs to perform the required logic.
  2. On Uninstallation: This action is triggered when the topping is uninstalled or removed from an organization.
Let's look at each of these in detail.

On Installation

The On Installation action is triggered immediately after a topping is successfully installed or updated in a Bigin organization. Conceptually, this is the topping's first run and the right place to perform one-time setup tasks that you don't want users to handle manually.

Note: You can write only one On Installation script per topping. This script is executed only during two key events of the topping: the topping being installed for the first time and an updated version of the topping being installed after publishing changes.

This means the On Installation script is not executed repeatedly. It runs only when the topping is installed or updated, ensuring that setup logic is executed only when it's actually required.

To create an On Installation script, access the Bigin Developer Console, navigate to the Install Actions section in the left panel, and choose Toppings.

You'll be redirected to the Deluge editor where you can write the script for the On Installation action.


In the right panel of the Deluge editor, you'll be able to find the installParamMap which contains important contextual details such as the organizationId, installerId, previousVersion, and other details that are provided by the install action script itself. These keys can be used within your script to perform custom logic based on the installation context.

For more information about the keys that you can use inside the installation script, refer to the install actions documentation.

On Uninstallation

The uninstallation process of a topping will be handled by the On Uninstallation action. This function runs when a topping is removed from an organization.

To create an On Uninstallation script, navigate to Install Actions in the left panel, choose Toppings, and write the script in the On Uninstallation section of the Deluge editor.


In the On Uninstallation action, the installParamMap provides the keys organizationId and installerId. These values indicate which organization the topping is being removed from and which user initiated the uninstallation.

Now that we've explored how both of the install actions work, let's move on to creating a topping using these actions in a real-world scenario.

Let's create a topping with install actions

To understand how install actions work in a real-world scenario, we’ll build a Compliance Notification Topping.

The purpose of the topping is to keep organization administrators of the Bigin account informed about the lifecycle of the topping—specifically when it becomes active and when it's removed from their Bigin account.

In many business environments, it's important for admins to be aware of compliance-related changes and system-level additions. Using install actions in the topping ensures that such notifications are handled automatically, without requiring any manual effort from the user.

To achieve this functionality, we'll rely on both of the install actions:
  1. When a user installs the topping, the On Installation action is triggered, through which an email notification is sent to all active admin users in the organization, informing them that the Compliance Notification Topping has been successfully enabled. Along with this, a compliance checklist document stored in Zoho WorkDrive is also attached to the email.
  2. When the topping is uninstalled, the On Uninstallation action is triggered, sending an email notification to all active admin users in the organization to inform them that the Compliance Notification Topping has been successfully enabled. A compliance checklist document stored in WorkDrive is also attached to the email.
Let's learn how to do this.

Setting up the topping

First, create a topping in the Bigin Developer Center. For detailed instructions on creating a topping, refer to this post on how to create a topping.

After creating a topping and accessing it in the Bigin Developer Console, the next step is to create the required service connections.
A connection for Bigin will be used to fetch admin users from the organization into the topping. In this connection we'll use the scope ZohoBigin.org.ALL, as we need to retrieve the org details of the Bigin account where the topping is installed.

Next, we need a WorkDrive connection because we need to download the compliance checklist file stored in WorkDrive and attach it to the notification email. For the WorkDrive connection, we'll be using the scopes WorkDrive.files.READ and ZohoFiles.files.READ.

For a detailed explanation of creating the default connections, refer to this post.

Once the connections are created, we can write the install action scripts.

Implementing the scripts

When the topping is installed, we need to send an email to all the active admin users with the installation details and the WorkDrive checklist as an attachment.

To begin, navigate to the Install Actions section in the left panel and select Toppings. Under the On Installation tab, we’ll write the Deluge script that needs to be executed when the user installs the extension.

Writing the On Installation script

In our topping, the On Installation script performs the following actions:
  1. Fetches all the active admin users in the organization
  2. Downloads the checklist file from WorkDrive
  3. Sends an email notification to the admin users with the installation details and the checklist file.
  1. topping_name = "Compliance Notification Topping";
  2. // 1) Fetch admin users
  3. resp = invokeurl
  4. [
  5. url :"https://www.bigin.com/developer/docs/apis/v2/get-users.html"
  6. type :GET
  7. connection:"biginplus__biginnewconnection"
  8. ];
  9. // 2) recipient list
  10. stakeholders = List();
  11. usersList = resp.get("users");
  12. if(usersList != null)
  13. {
  14. for each user in usersList
  15. {
  16. email = user.get("email");
  17. status = user.get("status");
  18. if(email != null && (status == null || status.toLowerCase() == "active"))
  19. {
  20. stakeholders.add(email);
  21. }
  22. }
  23. }
  24. // 3) Download WorkDrive file via Download API
  25. header = Map();
  26. header.put("Accept","application/vnd.api+json");
  27. resource_id = "khw4zbab917b7f4774260a06636089ef0074f";
  28. fileResp = invokeurl
  29. [
  30. url :"https://download.zoho.com/v1/workdrive/download/" + resource_id
  31. type :GET
  32. headers:header
  33. connection:"biginplus__zohoworkdriveconnection"
  34. ];
  35. // 4) constructing email
  36. org_id = installParamMap.get("organizationId");
  37. installer_id = installParamMap.get("installerId");
  38. current_time = zoho.currenttime;
  39. subject = "Bigin Topping Enabled: " + topping_name;
  40. message = "";
  41. message = message + "<b>" + topping_name + "</b> was <b>Installed</b>.<br/><br/>";
  42. message = message + "<b>Organization ID:</b> " + org_id + "<br/>";
  43. message = message + "<b>Installed by (User ID):</b> " + installer_id + "<br/>";
  44. message = message + "<b>Time:</b> " + current_time + "<br/><br/>";
  45. message = message + "<b>Business impact:</b> This topping is now active for the organization.<br/>";
  46. //sending the email
  47. if(!stakeholders.isEmpty())
  48. {
  49. sendmail
  50. [
  51. from :zoho.adminuserid
  52. to :stakeholders
  53. subject :subject
  54. message :message
  55. Attachments :file:fileResp
  56. ]
  57. }
For details about the API endpoints and request formats used in this code, refer to the Bigin and WorkDrive API documentation. For the syntax to send emails via a Deluge task, you can refer to this documentation.

Writing the On Uninstallation script

When a user decides to remove the topping, we'll send an email notification to ensure the admins stay informed.
  1. topping_name = "Compliance Notification Topping";
  2. // Fetch admin users
  3. resp = invokeurl
  4. [
  5. url :"https://www.zohoapis.com/bigin/v2/users?type=AdminUsers"
  6. type :GET
  7. connection:"biginplus__biginnewconnection"
  8. ];
  9. stakeholders = List();
  10. usersList = resp.get("users");
  11. if(usersList != null)
  12. {
  13. for each user in usersList
  14. {
  15. email = user.get("email");
  16. status = user.get("status");
  17. if(email != null && (status == null || status.toLowerCase() == "active"))
  18. {
  19. stakeholders.add(email);
  20. }
  21. }
  22. }
  23. org_id = installParamMap.get("organizationId");
  24. uninstaller_id = installParamMap.get("installerId");
  25. current_time = zoho.currenttime;
  26. subject = "Bigin Topping Disabled: " + topping_name;
  27. message = "";
  28. message = message + "<b>" + topping_name + "</b> was <b>Uninstalled</b>.<br/><br/>";
  29. message = message + "<b>Organization ID:</b> " + org_id + "<br/>";
  30. message = message + "<b>Uninstalled by (User ID):</b> " + uninstaller_id + "<br/>";
  31. message = message + "<b>Time:</b> " + current_time + "<br/><br/>";
  32. message = message + "<b>Business impact:</b> This topping is no longer available from now on.<br/>";
  33. if(!stakeholders.isEmpty())
  34. {
  35. //Send email
  36. sendmail
  37. [
  38. from :zoho.adminuserid
  39. to :stakeholders
  40. subject :subject
  41. message :message
  42. ]
Once we've configured both the On Installation and On Uninstallation scripts, we can test and publish the topping. When the user installs the topping, the install actions will be triggered automatically based on the topping's lifecycle events.

Let's walk through what happens at runtime.

What happens when the topping is installed or uninstalled

Upon installation, the user receives an email notification along with the topping checklist attachment as shown below.


When the topping is uninstalled, the user receives an email indicating that the topping has been disabled as shown below:


In this post, we've explored how install actions and uninstall actions give us control over the toppings. We'll cover more features of the Bigin Developer Console in our upcoming posts.

Stay tuned!

    • Recent Topics

    • Email was sent out without our permission

      Hi there, One customer just reached out to us about this email that we were not aware was being sent to our customers. Can you please check on your end?

    • Flexible Partial-Use Coupons (Stored Value Credits)

      Subject: Feature Request: Ability for users to apply partial coupon balances per transaction Problem Statement Currently, our coupons are "one-and-done." If a user has a $50 coupon but only spends $30, they either lose the remaining $20 or are forced

    • Prevent accidental duplicate entry of Customer Ordersome

      Zoho Support has confirmed that Zoho currently does not have any method (using Deluge, flow or any other method) to alert a user when a sales order has been entered twice using the same customer reference number (i.e. a duplicate). Most ERP platforms

    • Collapsing and expanding of lists and paragraphs

      hello Would you ever implement Collapsing and expanding of lists and paragraphs in zoho writer ? Best regards

    • Migrating Brevo Automation Logic to Zoho Campaigns

      Hello Zoho Campaigns Support Team, I am in the process of migrating my email marketing from Brevo to Zoho Campaigns. I have around 10,000 contacts, which I have already successfully exported from Brevo and imported into Zoho Campaigns. I now need guidance

    • Is there a way to delete workspaces?

      I want to remove one of the workspaces in my Campaigns account. I don't see any obvious way to do this. Am I missing something?

    • New Custom View -Sorting the Custom fields

      While creating a New Custom View in invoice , Customers, Bills ,expense etc , the sorting of custom fields are not available , a query function "order by / sort by  " may also be included in  Define new criteria module  which will be more beneficial to

    • Make CAMPAIGNS email look as simple as possible

      Hi there I'm trying to make my Campaigns email look as much like a normal email as possible. I'm a bit stuck with the "justification" of the email email block. Can I LEFT JUSTIFY the "whole email" to make it look "normal"? (Please see screenshot attached)

    • Canadian Banks ?

      Can you advise which Canadian Banks can be used to fully sync credit cards and bank accounts? Thanks

    • Sorry! we encountered some problems while sending your campaign. It will be sent automatically once we are ready. We apologize for the delay caused.

      Hello. Lately we are having problems with some campaigns, which show us this error message. Sorry! we encountered some problems while sending your campaign. It will be sent automatically once we are ready. We apologize for the delay caused. We can't find

    • Can I remove or divert certain contacts from an active Campaigns workflow?

      I have created a workflow in Zoho Campaigns, which sends different emails, once contacts have been added to a mailing list. To choose which email to send to the contacts, there are conditions, which divert contacts based on their company type and their company size. There was a subsection of this workflow, where company size wasn't selected correctly, and some contacts have been sent down the wrong path and received the wrong email. The workflow contains a reminder loop and a further series of emails.

    • How to map fields from Zoho Recruit to Zoho People

      I've got these fields from my Job Offer that I'm trying to map to the Work information fields in Zoho People, but they arent showing up. For example, how do I get the department name field (in the job post) to map to the work information field in Zoho

    • UTM in zoho campaigns

      Helloo everybody!!! Someone know how IF ZOHO CAMPAIGNS has UTM for tracking the url of any campaigns. thank u

    • Full Context of Zoho CRM Records for Zia in Zoho Desk for efficient AI Usage

      Hello everyone, I have a question regarding the use of Zia in Zoho Desk in combination with CRM data. Is it possible to automatically feed the complete context of a CRM record into Zia, so that it can generate automated and highly accurate responses for

    • Knowledge base printing

      I saw a posting about printing the knowledge base as I was looking for the answer, but we would like the ability to print out the entire knowledge base with a click, keeping the same organization format.   Bonus would include an index of keywords and

    • Search not working!

      I have items in my notebook tagged but when I search for a tag nothing comes up! Any fix for this?

    • Updates for Zoho Campaigns: Merge tag, footer, and autoresponder migration

      Hello everyone, We'd like to inform you of some upcoming changes with regard to Zoho Campaigns. We understand that change can be difficult, but we're dedicated to ensuring a smooth transition while keeping you all informed and engaged throughout the process.

    • How do i integrate google analytics to Zoho Campaigns?

      Looking to track Zoho Traffic from email Current topic is outdated

    • How do teams manage meeting follow-ups across Zoho tools?

      We’re using Zoho tools for collaboration and tracking, but managing meeting notes, action items, and follow-ups across teams is still challenging. Curious how others are handling this within Zoho workflows. Are there best practices or integrations that

    • Mejoras urgentes para ZOHO MEETING

      Tengo unos meses usando Zoho Meeting. En general, es buena, pero hay cosas vitales que no logra cumplir con mínima calidad. 1) Calidad de audio y video: urge mejoras. Audio con retraso, imagen borrosa, mal recorte de silueta con fondos virtuales. Además,

    • Saving sent email campaign as PDF

      I'm looking to add all campaigns sent to an archive folder in sharepoint. Is there anyway to accomplish this in Zoho Flow ? I'm falling at the first hurdle ... can I automatically save a sent campaign as a PDF to a folder location ?

    • Exporting All Custom Functions in ZohoCRM

      Hello, All I've been looking for a way to keep about 30 functions that I have written in Zoho CRM updated in my own repository to use elsewhere in other instances. A github integration would be great, but a way to export all custom functions or any way

    • Conditional Layouts On Multi Select Field

      How we can use Conditional Layouts On Multi Select Field field? Please help.

    • Appreciation to Qntrl Support Team

      We are writing this topic to appreciate the outstanding level of support from Qntrl Team. We have been using Qntrl since 2022 after shifting from another similar platform. Since we joined Qntrl, the team has shown a high level of professionalism, support,

    • How can I hide "My Requests" and "Marketplace" icon from the side menu

      Hello everybody, We recently started using the new Zoho CRM for Everyone. How can I hide "My Requests" and "Marketplace" from the side menu? We don't use these features at the moment, and I couldn't find a way to disable or remove them. Best regards,

    • Whatsapp Integration on Zoho Campaign

      Team: Can the messages from Zoho Campaign delivered through Whatsapp... now customers no longer are active on email, but the entire campaign module is email based.... when will it be available on whatsapp.... are there any thirdparty providers who can

    • Mandatory Field - but only at conversion

      Hello! We use Zoho CRM and there are times where the "Lead Created Date & Time" field isn't populated into a "Contractor" (Account is the default phrase i believe). Most of my lead tracking is based on reading the Lead Created field above, so it's important

    • Using data fields in Zoho Show presentations to extract key numbers from Zia insights based on a report created

      Is it possible to use data fields in Zoho Show presentations along with Zoho Analytics to extract key numbers from Zia insights based on a report created? For example, using this text below: (note that the numbers in bold would be from Zia Insights) Revenue

    • Free webinar: AI-powered agreement management with Zoho Sign

      Hi there! Does preparing an agreement feel like more work than actually signing it? You're definitely not alone. Between drafting the document, managing revisions, securing internal approvals, and rereading clauses to make sure everything still reflects

    • WhatsApp Channels in Zoho Campaigns

      Now that Meta has opened WhatsApp Channels globally, will you add it to Zoho Campaigns? It's another top channel for marketing communications as email and SMS. Thanks.

    • CRM For Everyone - Bring Back Settings Tile View

      I've been using CRM for Everyone since it was in early access and I just can't stand the single list settings menu down the left-hand side. It takes so much longer to find the setting I need. Please give users the option to make the old sytle tile view

    • Lets have Dynamics 365 integration with Zohobooks

      Lets have Dynamics 365 integration with Zohobooks

    • Add notes in spreadsheet view

      It would be great if we could Add/edit notes in the spreadsheet view of contacts/leads. This would enable my sales teams to greatly increase their number of calls. Also viewing the most recent note in the Contact module would also be helpful.

    • Opening balances - Accounts Receivable and Payable

      Our accounting year starts on 1st August 2013 and I have a Trial Balance as at that date, including Accounts Receivableand Accounts Payable balances, broken down by each customer and supplier. Q1 - do I show my opening balance date as 31st July 2013 or

    • Cancel Subscription

      Hi , Im want to cancel my account but without success please help me to do it

    • Making an email campaign into a Template

      I used a Zoho Campaign Template to create an email. Now I want to use this email and make it a new template, but this seems to be not possible. Am I missing something?

    • Direct Access and Better Search for Zoho Quartz Recordings

      Hi Zoho Team, We would like to request a few enhancements to improve how Zoho Quartz recordings are accessed and managed after being submitted to Zoho Support. Current Limitation: After submitting a Quartz recording, the related Zoho Support ticket displays

    • Multiple Cover Letters

      We are using the staffing firm edition of Recruit and we have noticed that candidates cannot add more than one cover letter. This is a problem as they might be applying for multiple jobs on our career site and when we submit their application to a client,

    • URGENT: Deluge issue with Arabic text Inbox

      Dear Deluge Support, We are facing an issue that started on 12/Feb/2026 with custom functions written using Deluge within Qntrl platform. Currently, custom functions do not accept Arabic content; it is replaced with (???) characters. Scenario 1: If we

    • File Conversion from PDF to JPG/PNG

      Hi, I have a question did  anyone every tried using custom function to convert a PDF file to JPG/PNG format? Any possibility by using the custom function to achieve this within zoho apps.  I do know there are many third parties API provide this with

    • Next Page