New to Campaigns? Some common early mistakes that might occur

New to Campaigns? Some common early mistakes that might occur

Hello Marketers,
Welcome back to another post in Marketer's Space.
If you're just getting started with Zoho Campaigns, things can feel exciting and slightly confusing at the same time. You're not alone. Most early frustrations come from setup gaps rather than product issues.

Looking at all the features in the product, many new users tend to run into the same few roadblocks. In this post, we'll breakdown what usually causes trouble (and how to avoid it). Whether you're just setting up your first campaign or refining your existing process, this post will help you build a strong foundation early.

Skipping domain authentication   

Many users start sending campaigns before setting up SPF and DKIM properly. Here's what happens when they skip it:
  1. Emails are visibly sent from "via zcsend.net".
  2. They encounter lower inbox placement.
  3. They result in trust issues in Gmail or Outlook.
Domain authentication isn't optional if you care about deliverability; it should be step one.

What can you do instead?
  1. Add and verify your sending domain inside Zoho Campaigns before launching your first campaign.
  2. Configure SPF and DKIM records in your domain's DNS settings.
  3. Wait for verification confirmation before sending in bulk.
  4. Run a small test campaign after setup to confirm proper alignment.
Authentication issues don't just affect inbox placement; they can also prevent campaigns from going out altogether.

Campaign moves back to draft after sending   

This often happens because one of the final checks fails—like sender verification, mandatory fields, or authentication settings.
Before clicking send, ensure the following:
  1. Your sender email is verified.
  2. Authentication (SPF/DKIM) is properly configured.
  3. You've reviewed the campaign checklist inside the editor carefully.
Most "failure to send" cases are configuration-related, not system errors.

Uploading large or unclean contact lists without preparation   

Many new users decide to import a large database and send a campaign immediately. Others upload lists that haven't been cleaned in months or years. Both situations can quietly hurt performance.
Common issues include:
  1. Importing thousands of old or inactive contacts at once
  2. Sending to contacts who haven't engaged in a long time
  3. Including duplicate entries
  4. Not removing bounced or inactive addresses
What does this lead to?
  1. Low open and click rates
  2. Higher bounce rates
  3. Increased spam complaints
  4. Poor sender reputation
For new accounts especially, this can impact deliverability very quickly.
A better way to approach this is to do the following:
  1. Start with your most engaged contacts.
  2. Gradually increase volume over time.
  3. Remove duplicates and inactive addresses.
  4. Segment your contacts based on engagement before sending.
Good deliverability isn't just about authentication; it's also about list hygiene and sending behavior.

Open rates show zero (especially in Gmail)

Open tracking depends on images being loaded. If the recipient's email client blocks images by default, if privacy protection is enabled (especially on Apple devices), or if images are preloaded differently, the open may not register.
This is common with:
  1. Gmail (especially with image blocking)
  2. Privacy-focused email settings
  3. Apple Mail privacy protection
A sudden drop in open rate doesn't always mean your emails aren't being read.
So what is the fix?
  1. Send internal test emails to see if tracking pixels are functioning.
  2. Use A/B tests to validate subject line performance rather than judging from one send.
  3. Compare trends over a period of time instead judging from one campaign.
Your open rate should be treated as an indicator, not as an exact measurement—because it isn't.

Automation doesn't trigger for everyone   

A common assumption is that once automation is active, it applies to all contacts, and users forget that building automations without testing entry conditions might never yield expected results.
A workflow may look correct, but in reality:
  1. Contacts must meet the trigger conditions.
  2. They must enter the workflow at the correct stage.
  3. Timing filters and status settings matter
This is usually a logic issue, not a bug. So how can you solve it?
  1. Test the workflow using a sample contact before activating it fully.
  2. Double-check entry criteria and filter rules.
  3. Review contact status and segmentation settings.
  4. Use the workflow report to confirm whether contacts entered the automation.

Not testing across devices and email services 

Emails that look perfect in the Zoho Campaigns editor may:
  1. Break in emails formatting/structure.
  2. Stack oddly on mobile displays.
  3. Misalign buttons.
The clear action is to first find out how your email looks via the Preview and Test mode, after which you can always send those test emails from the same section and see the actual results.
You can send such emails to:
  1. Gmail
  2. Outlook
  3. Mobile devices


The editor preview is not a perfectly accurate reflection of the real inbox view, so we always recommend that you test your email campaigns first across different devices and email services before sending them in bulk.

Ignoring spam score or content red flags 

The actual content of your email plays a major role in where it lands.
Common content-related mistakes include:
  1. Using heavy promotional language like "BUY NOW," "LIMITED OFFER," or excessive exclamation marks
  2. Writing subject lines that feel overly aggressive or misleading
  3. Including too many links in a short email
  4. Using shortened URLs
  5. Designing image-only emails with very little supporting text
  6. Embedding large attachments directly in the campaign
Another common oversight is not checking the spam score before sending. Even if the content feels fine, running it through the built-in checks helps identify structural red flags early.
Here's a better approach:
  1. Maintain a healthy balance between text and images.
  2. Keep links purposeful and minimal.
  3. Avoid excessive capitalization and exaggerated claims.
  4. Write subject lines that are clear rather than sensational.
  5. Test-send and review how the email appears in different inboxes.
Sending successful campaigns is all about earning inbox trust through clean structure and responsible messaging.

If you're just starting out, take your time with the setup. A well-configured account will always outperform a rushed campaign.

If you've already encountered one or more of these issues, you're not alone; they're all part of the learning curve. Feel free to share your experiences or additional insights in the comments below. Your input might help another marketer avoid the same roadblock.

Until next time, happy campaigning!

Regards,
Yashwanth S
User Education
Zoho Campaigns Team

    • Recent Topics

    • 3 year sick leave cycle

      How do you set up a sick leave cycle for South Africa? In SA the sick works like this for the first 6 months you get 0.83 paid sick days a month, then after 6 months you sick leave balance is reset to 30 days that can be used over a 36 month cycle.  This

    • WorkDrive and CRM not in sync

      1/ There is a CRM file upload field with WorkDrive file set as the source: 2/ Then the file is renamed in WorkDrive (outside CRM): 3/ The File in CRM is not synced after the change in WorkDrive; the file name (reference) in CRM record is not updated (here

    • Is Zoho Communityspaces now part of Zoho One?

      Is Zoho Communityspaces now part of Zoho One?

    • Bigin’s 2025 Evolution: Highlights from 2025 and What’s Ahead in 2026

      Dear Biginners, Wishing you a very happy New Year! As we stand at the cusp of endless possibilities in 2026, we would like to take a moment to reflect on what we achieved together in 2025. Your continued support, thoughtful feedback, and kind words of

    • Send Supervisor Rule Emails Within Ticket Context in Zoho Desk

      Dear Zoho Desk Team, I hope this message finds you well. Currently, emails sent via Supervisor Rules in Zoho Desk are sent outside of the ticket context. As a result, if a client replies to such emails, their response creates a new ticket instead of appending

    • Zoho Desk - Change Time Zone for all users and set default for new user

      Hi,   Is there a way to set a default time zone so that when user creates an account via the Zoho Desk invitation, they don't need to select the time zone via the hundreds of choice?   And, for already created users, can we edit the incorrect time zone selected by the user at the account creation ?   Thanks ! Fred

    • Allow Manual Popup Canvas Size Control

      Hello Zoho PageSense Team, We hope you're doing well. We would like to request an enhancement to the PageSense popup editor regarding popup sizing. Current Limitation: Currently, the size (width and height) of a popup is strictly controlled by the selected

    • Why does Zoho’s diff viewer highlight parts of unchanged lines?

      Hi everyone, I’ve noticed something odd in the Zoho editor’s diff view. When I delete a single line, the diff doesn’t just mark that line as removed. Instead, it highlights parts of the next line as if they changed, even though they are identical. Example:

    • Add deluge function to shorten URLs

      Zoho Social contains a nice feature to shorten URLs using zurl.co. It would be really helpful to have similar functionality in a Deluge call please, either as an inbuilt function or a standard integration. My Creator app sends an email with a personalised

    • form data load issue when saving as duplicate record is made

      Hello. I have a form with a lookup when a value is selected the data from the corresponding record is filled into all of the fields in the form. But the form is loaded in such a state that if any value is changed it will take all of the values pre loaded

    • Invoice template, how to change the text under "Notes" and "Terms and Conditions"

      In "Invoice templates", there are two text/info sections at the bottom:"Notes" and "Terms and Conditions". It is possible to change the names of these two headings, but how is it possible to change/alter the text under it. As a standard it says "Thank you for your business" under Notes - I need to change it into something different- How? Thank you.

    • Recurring Tasks and Reminders in Projects

      Recurring tasks are tasks that are created once, and then recreated automatically after a designated time period. For example, the invoice for your billable tasks is due every week. You can set that task to recreate itself every week. Also, the future

    • Unable to remove the “Automatically Assigned” territory from existing records

      Hello Zoho Community Team, We are currently using Territory Management in Zoho CRM and have encountered an issue with automatically assigned territories on Account records. Once any account is created the territory is assigned automatically, the Automatically

    • Improved Functionality PO Bill SO Invoice

      Hello, I need to enter over 100 items, it's frustrating to scroll a few item rows and wait for more to load, then scroll again. It would be nice to have buttons that scroll to the top or bottom with one click. Furthermore, these items I'm adding are VAT

    • Wishes for 2026

      Hello, and a happy new year 2026! Let's hope it's better for everyone. I'd like to share some thoughts on Zoho One and what could be useful in the short, medium, and long term. Some things are already there, but not applied to Zoho One. Others seem like

    • How to Integrate Zoho Books with Xero (No Native Connection Available)

      Hi everyone, I’m currently facing an issue with integrating Zoho Books invoices with Xero, as I’ve noticed Zoho does not provide a native integration with Xero at this time. I would like to ask: What are the common or recommended solutions for syncing

    • Markup instead of discount??

      Is it possible to have the discount field on an invoice or estimate be a markup instead? It's the very same functionality that I am looking for - to be able to markup an individual item by either a $ or a % and have that cost added (instead of subtracted) to the item cost.  Currently, I use the tax feature to accomplish this, but it's very awkward to have "Markup 15%" listed after the subtotal. Plus, if I want to markup items at different rates, I end up with several "markup" lines in the totals

    • Plan switch

      I thought I pressed the Free button, but after they set up the account, I see that I am on a Premium trial. Is this usual? How do I get onto the Free version?

    • 'Tax registration date'?

      The second question in setting up is 'Tax registration date'. My first question: which tax? My second question: why do you need the registration date?

    • What if we don't have an ABN?

      Australian business. Setting up. We have no ABN. It's not compulsory. Field not allowed to be blank. What to do?

    • Linking Multi-UOM Barcodes to Products in Zoho Books

      Greetings, I'm using Zoho Books for retail shop and I'm running into a bit of a challenge with products that have multiple Units of Measurement (UOMs) and corresponding barcodes. For example, I sell cigarettes both as individual packets and in cartons

    • How to change "from" email address when invoicing.

      HELP! I'm new to Zoho Books and when I first set it up used a different email address than I currently want to use. I've tried to go to settings and change the default email address but when I generate an invoice it still shows the old email address (although I can't find it anywhere else). I really need to get this changed before I can use the program. Any help would be appreciated.

    • Critical Issue: Tickets Opened for Zoho Support via the Zoho Help Portal Were Not Processed

      Hi everyone, We want to bring to your attention a serious issue we’ve experienced with the Zoho support Help Portal. For more than a week, tickets submitted directly via the Help Portal were not being handled at all. At the same time no alert was posted

    • Hide/Show Subform Fields On User Input

      Hello, Are there any future updates in Hide/Show Subform Fields "On User Input"?

    • Cloning Item With Images Or The Option With Images

      Hello, when I clone an item, I expect the images to carry over to the cloned item, however this is not the case in Inventory. Please make it possible for the images to get cloned or at least can we get a pop up asking if we want to clone the images as

    • Custom validation in CRM schema

      Validation rules in CRM layouts work nicely, good docs by @Kiran Karthik P https://help.zoho.com/portal/en/kb/crm/customize-crm-account/validation-rules/articles/create-validation-rules I'd prefer validating data input 'closer to the schema'

    • Adding Default Module Image into mail merge field

      As with most people finding their way to these forums i have a specific requirement that doesn't seem to be supported by Zoho I have created 2 custom modules to suit my purpose 1 is an inventory type module that lists aluminium extrusions, and all relevant

    • Is it possible to roll up all Contact emails to the Account view?

      Is there a way to track all emails associated with an Account in one single view? Currently, email history is visible when opening an individual Contact record. However, since multiple Contacts are often associated with a single Account, it would be beneficial

    • Managing credit cards

      Hi, I'm hoping someone on this forum can help me out managing credit card accounts.  Transaction are entered as expenses using the credit card account and, as expected, the card balance shows as a negative since this is clearly money I owe them.  Once I make a payment, of the full amount owed, I woudl expect the balance to become zero. It doesn't, the negative balance just keeps on increasing even though the payment is reflected correctly in my main operating account.  No-one at Zoho seems to understand

    • Free Training - Explore What’s New in Zoho One 2025

      Greetings! We hope you have all had a chance by now to get hands-on with the new features and updates released as part of ZO25. Yes, we understand that you may have questions and feedback. To ensure you gain a comprehensive understanding of these updates,

    • Quick way to add a field in Chat Window

      I want to add Company Field in chat window to lessen the irrelevant users in sending chat and set them in mind that we are dealing with companies. I request that it will be as easy as possible like just ticking it then typing the label then connecting

    • How to create a two way Sync with CRM Contacts Module?

      Newbie creator here (but not to Zoho CRM). I want to create an app that operates on a sub-set of CRM Contacts - only those with a specific tag. I want the app records to mirror the tagged contacts in CRM. I would like it to update when the Creator app

    • How to import data from PDF into Zoho Sheet

      I am looking to import Consolidated Account Statement (https://www.camsonline.com/Investors/Statements/Consolidated-Account-Statement) into zoho sheet. Any help is appreciated. The pdf is received as attachment in the email, this document is password

    • Trigger Workflow, Approval Process, Blueprint by Deluge in Zoho CRM

      #Tips & Trick If you intend to activate your Workflow, Approval Process, or Blueprint through either the deluge script or Zoho CRM API during the creation, updating, or deletion of a record Try this Script mp = Map(); trigger = List(); // Workflow trigger.add("workflow");

    • Zoho Projects Android app: Integration with Microsoft Intune

      Hello everyone! We’re excited to announce that Zoho Projects now integrates with Microsoft Intune, enabling enhanced security and enterprise app management. We have now added support for Microsoft Intune Mobile Application Management (MAM) policies through

    • Cant't update custom field when custom field is external lookup in Zoho Books

      Hello I use that : po = zoho.books.updateRecord("purchaseorders",XXXX,purchaseorder_id,updateCustomFieldseMap,"el_books_connection"); c_f_Map2 = Map(); c_f_Map2.put("label","EL ORDER ID"); c_f_Map2.put("value",el_order_id); c_f_List.add(c_f_Map2); updateCustomFieldseMap

    • Set connection link name from variable in invokeurl

      Hi, guys. How to set in parameter "connection" a variable, instead of a string. connectionLinkName = manager.get('connectionLinkName').toString(); response = invokeurl [ url :"https://www.googleapis.com/calendar/v3/freeBusy" type :POST parameters:requestParams.toString()

    • Possible to connect Zoho CRM's Sandbox with Zoho Creator's Sandbox?

      We are making some big changes on our CRM so we are testing it out in CRM's Sandbox. We also have a Zoho Creator app that we need to test. Is it possible to connect Zoho CRM's Sandbox to Zoho Creator's Sandbox so that I can perform those tests?

    • I Need Help Verifying Ownership of My Zoho Help Desk on Google Search Console

      I added my Zoho desk portal to Google Search Console, but since i do not have access to the html code of my theme, i could not verify ownership of my portal on Google search console. I want you to help me place the html code given to me from Google search

    • Timeline Tracker

      Hi Team, I am currently using Zoho Creator – Blueprint Workflows, and I would like to know if there is a way to track a timeline of the approval process within a Blueprint. Specifically, I am looking for details such as: Who submitted the record Who clicked

    • Next Page