New to Campaigns? Some common early mistakes that might occur

New to Campaigns? Some common early mistakes that might occur

Hello Marketers,
Welcome back to another post in Marketer's Space.
If you're just getting started with Zoho Campaigns, things can feel exciting and slightly confusing at the same time. You're not alone. Most early frustrations come from setup gaps rather than product issues.

Looking at all the features in the product, many new users tend to run into the same few roadblocks. In this post, we'll breakdown what usually causes trouble (and how to avoid it). Whether you're just setting up your first campaign or refining your existing process, this post will help you build a strong foundation early.

Skipping domain authentication   

Many users start sending campaigns before setting up SPF and DKIM properly. Here's what happens when they skip it:
  1. Emails are visibly sent from "via zcsend.net".
  2. They encounter lower inbox placement.
  3. They result in trust issues in Gmail or Outlook.
Domain authentication isn't optional if you care about deliverability; it should be step one.

What can you do instead?
  1. Add and verify your sending domain inside Zoho Campaigns before launching your first campaign.
  2. Configure SPF and DKIM records in your domain's DNS settings.
  3. Wait for verification confirmation before sending in bulk.
  4. Run a small test campaign after setup to confirm proper alignment.
Authentication issues don't just affect inbox placement; they can also prevent campaigns from going out altogether.

Campaign moves back to draft after sending   

This often happens because one of the final checks fails—like sender verification, mandatory fields, or authentication settings.
Before clicking send, ensure the following:
  1. Your sender email is verified.
  2. Authentication (SPF/DKIM) is properly configured.
  3. You've reviewed the campaign checklist inside the editor carefully.
Most "failure to send" cases are configuration-related, not system errors.

Uploading large or unclean contact lists without preparation   

Many new users decide to import a large database and send a campaign immediately. Others upload lists that haven't been cleaned in months or years. Both situations can quietly hurt performance.
Common issues include:
  1. Importing thousands of old or inactive contacts at once
  2. Sending to contacts who haven't engaged in a long time
  3. Including duplicate entries
  4. Not removing bounced or inactive addresses
What does this lead to?
  1. Low open and click rates
  2. Higher bounce rates
  3. Increased spam complaints
  4. Poor sender reputation
For new accounts especially, this can impact deliverability very quickly.
A better way to approach this is to do the following:
  1. Start with your most engaged contacts.
  2. Gradually increase volume over time.
  3. Remove duplicates and inactive addresses.
  4. Segment your contacts based on engagement before sending.
Good deliverability isn't just about authentication; it's also about list hygiene and sending behavior.

Open rates show zero (especially in Gmail)

Open tracking depends on images being loaded. If the recipient's email client blocks images by default, if privacy protection is enabled (especially on Apple devices), or if images are preloaded differently, the open may not register.
This is common with:
  1. Gmail (especially with image blocking)
  2. Privacy-focused email settings
  3. Apple Mail privacy protection
A sudden drop in open rate doesn't always mean your emails aren't being read.
So what is the fix?
  1. Send internal test emails to see if tracking pixels are functioning.
  2. Use A/B tests to validate subject line performance rather than judging from one send.
  3. Compare trends over a period of time instead judging from one campaign.
Your open rate should be treated as an indicator, not as an exact measurement—because it isn't.

Automation doesn't trigger for everyone   

A common assumption is that once automation is active, it applies to all contacts, and users forget that building automations without testing entry conditions might never yield expected results.
A workflow may look correct, but in reality:
  1. Contacts must meet the trigger conditions.
  2. They must enter the workflow at the correct stage.
  3. Timing filters and status settings matter
This is usually a logic issue, not a bug. So how can you solve it?
  1. Test the workflow using a sample contact before activating it fully.
  2. Double-check entry criteria and filter rules.
  3. Review contact status and segmentation settings.
  4. Use the workflow report to confirm whether contacts entered the automation.

Not testing across devices and email services 

Emails that look perfect in the Zoho Campaigns editor may:
  1. Break in emails formatting/structure.
  2. Stack oddly on mobile displays.
  3. Misalign buttons.
The clear action is to first find out how your email looks via the Preview and Test mode, after which you can always send those test emails from the same section and see the actual results.
You can send such emails to:
  1. Gmail
  2. Outlook
  3. Mobile devices


The editor preview is not a perfectly accurate reflection of the real inbox view, so we always recommend that you test your email campaigns first across different devices and email services before sending them in bulk.

Ignoring spam score or content red flags 

The actual content of your email plays a major role in where it lands.
Common content-related mistakes include:
  1. Using heavy promotional language like "BUY NOW," "LIMITED OFFER," or excessive exclamation marks
  2. Writing subject lines that feel overly aggressive or misleading
  3. Including too many links in a short email
  4. Using shortened URLs
  5. Designing image-only emails with very little supporting text
  6. Embedding large attachments directly in the campaign
Another common oversight is not checking the spam score before sending. Even if the content feels fine, running it through the built-in checks helps identify structural red flags early.
Here's a better approach:
  1. Maintain a healthy balance between text and images.
  2. Keep links purposeful and minimal.
  3. Avoid excessive capitalization and exaggerated claims.
  4. Write subject lines that are clear rather than sensational.
  5. Test-send and review how the email appears in different inboxes.
Sending successful campaigns is all about earning inbox trust through clean structure and responsible messaging.

If you're just starting out, take your time with the setup. A well-configured account will always outperform a rushed campaign.

If you've already encountered one or more of these issues, you're not alone; they're all part of the learning curve. Feel free to share your experiences or additional insights in the comments below. Your input might help another marketer avoid the same roadblock.

Until next time, happy campaigning!

Regards,
Yashwanth S
User Education
Zoho Campaigns Team

    • Recent Topics

    • Zoho Help Desk - Not receiving emails

      Hello… I am on your trial version of help desk… and I am having trouble getting emails from Zoho Help Desk to my MS Outlook Exchange Server… So when a customer sends ticket request I am not getting an email with a notification? I have read your articles

    • Almost all Flows are being queued

      A few days ago I saw one of my Flows status was Queued. This was the first time this had ever happened. Now, almost every Flow that triggers is Queued for at least a few minutes. If I re-trigger the Flow (which causes separate problems) they sometimes

    • Employment Contract / HRMS Documents - Zoho People

      How do I create customized HR documents for disbursal from Zoho People ? Example, say offer letters ? appointment letters ? Memos ? We want to be able to preset these in one or ther other form and issue them to employees who are in Zoho People.

    • Live webinar: Craft and deliver impactful slides with Show’s desktop apps

      If you love the comfort of working on your desktop and want a setup that keeps you focused and uninterrupted, this session is made for you. We’re excited to invite you to our upcoming live webinar: "Craft and deliver impactful slides with Show's desktop

    • Enhancements to Bigin's forms

      Greetings, I hope all of you are doing well. We're happy to announce a few recent enhancements we've made to Bigin's forms. We'll go over each one in detail. Merge field support in auto-filled forms The auto-fill option in Bigin's forms lets you predefine

    • Direct link to Record Summary

      Hi everyone, In one of my reports, I have built a Record Summary template to display the details of one record. I would like to be able to link directly to this Record Summary once I submit a new record, without having to go to the list of records first and click on View. Is there a possibility to do so ?  Should I use the URL by passing some parameters ? Thank you very much for your help ! Guillaume

    • Amendment effective date

      Hi everyone, I noticed that the amendment effective date mentionned in my amendment is not right. Indeed, when a contract is amended several times, it states the previous amendment and their effective date. However, the effective date stated is always

    • Show both Vendor and Customers in contact statement

      Dear Sir, some companies like us working with companies as Vendor and Customers too !!! it mean we send invoice and also receive bill from them , so we need our all amount in one place , but in contact statement , is separate it as Vendor and Customer, 

    • STOCK history in zohosheets

      is it possible to get historical stock value using stock function in zoho sheets? i could not see from and to period in the helper document.

    • Agent password reset

      Hi Zoho support, I would like to ask if there is a way the admin can reset a password of an agent? Regards

    • Can receive but not send messages in Zoho Mail

      Hello! I was able to configure my email client successfully in that I can receive messages just fine. However, when I send messages out, they seem to go out fine (I don't receive any errors or anything), but the recipient does NOT receive those messages.

    • Mail is sent twice!

      Been using Zoho for a while now. Installed Zoho for someone else and some weird things are happening. Mails are being sent twice. He is using Thunderbird as an email client. I already read about email being duplicated in the sent folder. But in my case

    • Can't login IMAP suddenly

      Since this evening I'm getting the error: You are yet to enable IMAP for your account. Please contact your administrator... IMAP always been enabled in my account and was workign fine for the past 7 years. Already tried turning IMAP off and on again.

    • Sending of username did not succeed: Mail server pop.zoho.com responded: User already specified

      I am having issues receiving emails from Zoho in Thunderbird. I am getting the above error. The first error tells me Authentication failed, and prompts me to enter in my password. Then I get the above error. I can receive emails when I log in online to

    • Bug tracking

      Hi, does anyone know how to track errors during picking or packing? This way I can keep track and see how to improve and prevent errors in this area.

    • Migration of corporate mail environment from Yandex 360 to Zoho mail

      I have to migrate a corporate mail environment with an existing domain from Yandex 360 to Zoho mail. It is vital to migrate all users with all the data. I have read the article on this topic using MacMister Email Backup Software just now and have some

    • I'm unable to send mail pthrough Zoho SMTP programmatically

      This has been working for years, but today it's been offline all day long. I see nothing anywhere on your site about this. I'm not the only one experiencing this. Downdetector has a spike of reports today

    • Can no longer send email via Django site

      This was working fine as of 11/7/25. Now I am unable to send user verification emails from a Django site on a AWS lightsail sever. When a user attempts to register the following error occurs. I have also attempted to send a test email via the shell and

    • unable to send email but able to receive email

      my email address is info@securityforceservices.ca

    • Login to server failing

      When trying to retrieve my mail, I am getting this error message -- Login to server pop.zoho.com with username (my email address) failed. It gives me the option to retry, enter password, or cancel. Then I get this message -- Sending of username did not

    • Configuration failed: 200 response not received for POST request.

      Hello, I am trying to set up a webhook to connect with an Salesforce but I receive the following error from Zoho: Configuration failed: 200 response not received for POST request I have tried testing it on webhook.site as well and receive the same error

    • Zoho Migration Assistant not working

      Hello, I am trying to use you Migration assistant to migrate emails from Rediff to Zoho. I am stuck in the first step. After downloading the migration tool, I copied the link to verify user credentials, however, after pasting the link in the browser,

    • Contacts Missing — PeopleSync/Zoho Mail

      English: In our company we use ManageEngine Mobile Device Manager (MDM), Free edition, to manage corporate mobile devices. Our usage policy does not allow personal Google accounts on these devices; therefore, Google account sync is blocked through MDM.

    • Best way to integrate Zoho with mobile app for managing customer requests with real-time notifications?

      Hello, I'm building a solution for a travel company where customers submit requests through a website, and the sales team manages these requests through a mobile app. The Requirement: Customers fill a form on the website (name, email, number of children,

    • Kaizen #57 - Mass Update API in Zoho CRM

      Hello everyone! Welcome back to yet another post in the Kaizen series. This week, we will discuss the Mass Update API in Zoho CRM. In this post, we will cover the following: 1. Introduction 2. Mass Update Records API  3. Schedule Update and Get Status

    • Getting Attachments in Zoho Desk via API

      Is there a way to get attachments into Zoho Desk via an API?      We have a process by which a zoho survey gets sent to the user as a link in a notification.    The survey has several upload fields where they can upload pdf documents.    I've created

    • Pincode based Product Restriction

      we have different types of products. 1) Very bulky items like plywood. 2) Too delicate items like glass These type of products we want to sell to local customers. Other products we want to supply all over India. There should be an option to restrict products

    • Related Lists filter

      I have Contacts showing in our Accounts module. I customized the Contacts module with an Employment Status field, with the following picklist options: "Primary Contact", "Secondary Contact", "Active Staff(not a main contact)", and "No longer employed".

    • Standalone custom function not generating logs

      Why dont't standalone custom functions generate logs when the're called from another function? I have some functions (workflow, buttons and blueprint) that have common parts, so I put that part in a standalone function which is called from the others.

    • Urgent Security Feature Request – Add MFA to Zoho Projects Client Portal Hello Zoho Projects Team,

      Hello Zoho Projects Team, We hope you are doing well. We would like to submit an urgent security enhancement request regarding the Zoho Projects Client Portal. At this time, as far as we are aware, there is no Multi-Factor Authentication (MFA) available

    • Creator HTML page refresh

      Hi, I have added around 5 different html snippets in single creator page. I understand, I can refresh the entire page from page script using Navigational URLs https://help.zoho.com/portal/en/kb/creator/developer-guide/others/url-patterns/articles/navigational-urls

    • Zoho Desk - Custom Module Related List Columns on Tickets

      I have a custom module in Zoho Desk called Asana Tasks, each task has a lookup to a Ticket. On the Ticket I want to see the columns of the Asana Tasks in the related list . Is there a way to do this? Right now it just has the name of the record and I

    • What is your opinion of the new UI?

      Hi Everyone, I would like to see what everyone thinks of the new Zoho One Dashboard. I don't get it, but perhaps I'm missing something. What are your thoughts?

    • What are the OAuth scopes needed to access the Zoho MCP server?

      I think I'm authenticating with the MCP server endpoint successfully using a bearer token but I can't successfully initialize an MCP session. I'm using the official MCP Python sdk (https://github.com/modelcontextprotocol/python-sdk). I get as far as here

    • "Temporary Error" in Zoho CRM Data Source sync

      I edited my setup for the Zoho CRM to Zoho Analytics Data Source Import configuration to add some new fields. After I saved the changes, I clicked the (Sync Now) link. After a few minutes I got a Sync failure error. The only reason given is "A temporary

    • Account blocked for IMAP use

      Hello, My email client (Evolution) can't sync mail anymore. It gives the error: "Your account is temporarily blocked for IMAP use. This may happen if you exceed the maximum number of simultaneous IMAP connections allowed. Kindly try again after some time."

    • Is SMTP included in the free plan?

      My client has a Zoho Mail Free 14 day trial that ends tomorrow. She has set up a domain email address with SMTP on a third party app and is wondering if it will continue working once her plan downgrades to the free forever plan. Thanks

    • Zoho mail issue.

      I have verified my domain ohhoexpress.online by adding necessary TXT and MX records. But when I am sending email to any external email id, it is showing as zohomail.com. Also while I am sending mail to internal mail id, it is saying user not found whereas

    • My email is blocked from sending

      I get this message when I try to send any message .. > Unable to send message, Reason 554 5.1.8 Email Outgoing Blocked We have urgent emails to send and the issue continues to persist from yesterday. Please help us with this issue as soon as possibl

    • [WEBINAR] Smooth year-end closure with Zoho Books (KENYA)

      Hello there, This webinar is for all Kenyan businesses looking to wrap up their financial year smoothly! Join our free session to learn how Zoho Books can simplify your year-end process. What to expect from this webinar: - All the latest updates in Zoho

    • Next Page