Feature Request: Ability to set Default Custom Filters and apply them via URL/Deluge

Feature Request: Ability to set Default Custom Filters and apply them via URL/Deluge

I've discovered a significant gap in how Zoho Creator handles Custom Filters for reports, and I'm hoping the Zoho team can address this in a future update. This limitation has been raised before and continues to be requested, but remains unresolved.

The Issue
According to the official documentation, Custom Filters allow developers to create predefined filter combinations that users can select from a dropdown menu. This is a powerful feature for simplifying complex filtering scenarios for end users.
However, there is no way to set a default Custom Filter that automatically applies when a report loads, nor can Custom Filters be applied via URL parameters or Deluge scripts.
Example Use Case
Consider a simple Clients Report with Custom Filters for "Active Clients" and "Inactive Clients".
Desired behavior:
  • Report loads with "Active Clients" filter pre-applied by default
  • Users can remove the filter to see all clients
  • Users can switch to "Inactive Clients" filter when needed
Current reality: The report always loads unfiltered, showing ALL clients. Users must manually select the "Active Clients" filter every single time they access the report—there's no way to set it as the default.
The Problem
Zoho Creator provides excellent support for field-based filtering via functionality-based URLs—including operators like EQUALS, CONTAINS, BETWEEN, date ranges, and more. However, Custom Filters exist in complete isolation from all programmatic control.
Capability Field-Based URL Filtering Custom Filters
User can manually apply ✓ Yes ✓ Yes
Apply via URL parameter ✓ Yes
?FieldName=value		 ✗ No
Use operators (CONTAINS, BETWEEN, etc.) ✓ Yes
&FieldName_op=26		 ✗ N/A
Set as default on report load ✓ Yes (Report Criteria) ✗ No
Apply via openUrl in Deluge ✓ Yes ✗ No
Pre-select on embedded reports ✓ Yes ✗ No
"Hard" vs. "Soft" Filtering — The UX Problem
This limitation creates a fundamental UX trade-off that developers shouldn't have to make:
Approach Behavior User Experience
Report Criteria
(Hard Filter)		 Permanently applied. Cannot be removed or changed by the user. Users are locked in. They cannot explore beyond the predefined criteria.
Custom Filter
(Soft Filter)		 User-selectable. Can be applied, changed, or removed at will. Users start with a focused view but can remove it to see the bigger picture.
The problem: We are forced to use "Hard Filters" (Report Criteria) when the use case actually requires "Soft Filters" (a sensible default that users can adjust). This hurts the end-user's ability to explore data.
The "AND Logic Trap" with Pages:
Report Criteria is global—it persists everywhere: direct browser access, mobile app, embedded in Pages, and exports. When embedding a report in a Page, any criteria added via the Page Builder uses AND logic with the existing Report Criteria: 
Report Criteria: Status == "Active"
Page Embed Criteria: City == "New York"
Result: Status == "Active" AND City == "New York"
You cannot "subtract" or override Report Criteria. If your "Clients Report" has hard-coded criteria showing only "Active" clients, you cannot embed that same report on an "Archived Clients" page. This forces you to clone the report entirely.
Custom Filters are designed to solve this—allowing a single report to adapt to different contexts. But without the ability to set a default Custom Filter via URL or Page embed, this flexibility is completely inaccessible.
The Current Workarounds (All Suboptimal)
To achieve "default filter" behavior, developers are forced into one of these suboptimal approaches:
Workaround 1: Report Cloning ("Report Bloat")
Many users simply duplicate the "Clients Report," rename it "Active Clients Report," and set hard-coded criteria. This leads to:
  • Application bloat with multiple near-identical reports
  • Violates the DRY (Don't Repeat Yourself) principle
  • Maintenance nightmare—changes must be applied to every clone
  • Confusing for users who see multiple similar reports in navigation
Workaround 2: URL Parameter Construction
Abandon Custom Filters entirely and replicate the filter logic using URL parameters: 
// Instead of simply setting "Active Clients" as the default Custom Filter,
// developers must construct URL parameters manually:

base_url = "https://creatorapp.zoho.com/myaccount/crm-app/#Report:Clients_Report";

// Replicate the Custom Filter logic with field-based parameters
filter_params = "?Status=Active&Status_op=18";  // 18 = EQUALS operator

openUrl(base_url + filter_params, "same window");
Additional friction: Finding the correct Operator ID (e.g., 18 for EQUALS, 26 for CONTAINS, 58 for BETWEEN) requires digging through documentation. Custom Filters abstract this complexity away—losing them forces developers to deal with these obscure codes.
Problems with both approaches:
  • Complex filter logic must be duplicated—once in the Custom Filter definition (for manual use) and again in Deluge scripts (for automation)
  • No single source of truth for filter criteria
  • Maintenance nightmare when filter logic changes—updates required in multiple places
  • Users see raw URL parameters instead of friendly Custom Filter names
  • Custom Filters with complex multi-field criteria become extremely verbose URL strings
What Should Happen Instead
Proposed Solution 1: Default Custom Filter Setting
Add a simple option in Report Properties to designate one Custom Filter as the default: 
Report Properties → Custom Filters → [Filter Name] → ☑ Set as Default
When enabled, this filter would automatically apply when the report loads, while still allowing users to switch to other Custom Filters or clear it entirely.
Proposed Solution 2: URL Parameter Support
Allow Custom Filters to be specified via URL parameter, consistent with existing functionality-based URL patterns: 
https://creatorapp.zoho.com/myaccount/crm-app/#Report:Clients_Report?zc_CustomFilter=Active_Clients
This would enable developers to programmatically direct users to reports with the appropriate Custom Filter pre-applied, using a single clean parameter instead of replicating complex field-based criteria.
Proposed Solution 3: Deluge Integration
Support Custom Filter names in openUrl calls: 
// Clean, maintainable approach
openUrl("#Report:Clients_Report?zc_CustomFilter=Active_Clients", "same window");

// Instead of duplicating all the filter logic
openUrl("#Report:Clients_Report?Status=Active&Status_op=18", "same window");
Real-World Impact
This limitation affects any workflow requiring:
  • Default filtered views — A Clients report should show "Active Clients" by default, not all clients
  • Dashboard navigation — Clicking a KPI tile should open a report with the relevant Custom Filter applied
  • Email links to filtered reports — "Click here to see overdue invoices" should pre-apply the appropriate filter
  • Embedded reports in Pages — Different page contexts should show different default filter states without cloning reports
  • Mobile experience — On mobile apps, filters are hidden behind menus. Users often miss them entirely. A default Custom Filter ensures users see relevant data immediately without navigating through menus on a small screen
  • User onboarding — New users should see a sensible default view, not unfiltered data overwhelming them

Developer Impact: Custom Filters are excellent for end-user experience but nearly useless for automation and programmatic control. This gap forces developers to maintain duplicate filter logic—once in Custom Filters for manual use, and again as URL parameters for automation.

Request to Zoho Team

Can this be addressed in a future update?

The current implementation forces developers to choose between:

1. User-Friendly Custom Filters
Easy for users to understand and apply manually, but no programmatic control or default state 		2. URL Parameter Filtering
Full programmatic control via ?FieldName=value&FieldName_op=constant, but complex to maintain and requires duplicating filter logic

We shouldn't have to choose—Custom Filters should support both user interaction AND programmatic control.

Community Input Requested: Has anyone else encountered this limitation or found a workaround? I'd love to hear how others are handling scenarios where a default Custom Filter is needed.


      • Recent Topics

      • All new Address Field in Zoho CRM: maintain structured and accurate address inputs

        Availability Update: 29 September 2025: It's currently available for all new sign-ups and for existing Zoho CRM orgs which are in the Professional edition exclusively for IN DC users. 2 March 2026: Available to users in all DCs except US and EU DC. 24

      • Error when subscribing to any iCal feed in Group Calendar

        When I try to add any iCal URL via Settings → Calendar → Calendars → Group Calendars → Manage → Subscribed by Group, Zoho pops up an ‘Internal Server Error’ and nothing is added in the ‘Subscribed by Group’ list. But - the feed then appears under my personal

      • Record Limit on Report

        I have set up a report that I'm putting on a "page". I have filters set up to only show the records with deadlines in the next 45 days. But I only want the report to show the first 3 records (and if possible have a pagination option at the bottom to access

      • Re-Apply SLA When Ticket Reopened from Closed Status?

        If you have an SLA applied, timers are deactivated when going to "On Hold" status type and reactivated when going back to an Open status type. What we discovered is when a customer replies to a closed case and it reopens, the SLA is not applied and timers

      • Check printing alignments always changes

        Hello, We have a frustrating problem with printing checks. We use Quickbooks voucher checks, which works okay for us. The problem is the printing alignment for the check's "Date, Pay to the Order of, Amount, and Amount in Words" changes every time we

      • Problem with the blueprint flow.

        Scenario: 3 departments in a single environment: A-B-C agents from department 1 D-E-F agents from department 2 G-H agents from department 3 Since we've been using Zohodesk (2023), agents can assign tickets to the correct department using the blueprint

      • Zoho ERP | Product updates | June 2026

        Hello users, We launched Zoho ERP on January 23, and since then, our goal has been to help businesses streamline and manage their operations with greater efficiency, flexibility, and control. Since the launch, we've continued to enhance the platform every

      • Kaizen #125 Manipulating Multi-Select Lookup fields (MxN) using Zoho CRM APIs

        Hello everyone! Welcome back to another week of Kaizen. In last week's post in the Kaizen series, we discussed how subforms work in Zoho CRM and how to manipulate subform data using Zoho CRM APIs. In this post, we will discuss how to manipulate a multi-select

      • Zoho CRM upload files error

        Since today, we have been experiencing issues with uploading photos to opportunities. The message indicates that the storage is full, but as far as I can see, there is still plenty of space available. Could there be an issue or a bug?

      • "Make online" not clearing previously downloaded files from disk

        I downloaded a large folder via "Make offline" so I could copy it to another location. This worked. When I was done I hoped that "Make online" would restore it to the previous state where those files are not stored locally in TrueSync. This did not work—Finder

      • Please Make Zoho CRM Cadences Flexible: Allow Inserting and Reordering Follow-Up Steps

        Sales processes are not static. We test, learn, and adapt as customers respond differently than expected. Right now, Zoho Cadences do not support inserting a new step between existing follow-ups or changing the type of an existing primary step. If I realize

      • WhatsApp Calling Integration via Zoho Desk

        Dear Zoho Desk Team, I would like to request a feature that allows users to call WhatsApp numbers directly via Zoho Desk. This integration would enable sending and receiving calls to and from WhatsApp numbers over the internet, without the need for traditional

      • Client Script | Update - Client Script Support For Custom Buttons

        Hello everyone! We are excited to announce one of the most requested features - Client Script support for Custom Buttons. This enhancement lets you run custom logic on button actions, giving you greater flexibility and control over your user interactions.

      • Introducing Custom Columns in Forecasts in Zoho CRM

        Hello all, Forecasts in Zoho CRM help sales representatives, managers, and business stakeholders evaluate performance and plan future sales activities. While standard metrics such as Target, Achieved Amount, and Pipeline Amount provide a baseline view,

      • Zoho Books - France

        L’équipe de Zoho France reçoit régulièrement des questions sur la conformité de ses applications de finances (Zoho Books/ Zoho Invoice) pour le marché français. Voici quelques points pour clarifier la question : Zoho Books est un logiciel de comptabilité

      • 404 error at checkout

        Our customers are getting a 404 error at checkout. Anyone else with the same problem?

      • Let's bring Manufacturing Resource Planning (MRP), Material Requirement Planning (MRP), and Production Planning/Management module / feature in Zohobooks

        Let's bring Manufacturing Resource Planning (MRP), Material Requirement Planning (MRP), and Production Planning/Management module / feature in Zohobooks

      • Will I see emails sent via campaigns in CRM?

        It would be useful for people to be able to see emails sent via campagins in Zoho CRM is that possible?

      • Zoho Forms - Failed CRM Sync Improvement

        I'd like to suggest an enhancement to the Zoho Forms and Zoho CRM integration. Currently, once a form entry has been submitted, there is no simple way to push that individual entry to CRM again if needed. Before anyone mentions it, I am aware that the

      • Zoho ZUGs Meetups 2026 en España: Descubriendo nuevas posibilidades con Zoho

        ¡Hola, Español Zoho Community! Hemos celebrado una nueva edición de los Zoho User Groups (ZUGs) en España (Madrid, Barcelona & Valencia), una excelente oportunidad para reunirnos, formarnos y descubrir nuevas formas de sacar más partido a nuestras herramientas

      • What is MCP and How Does It Connect to Zoho Invoice?

        If you've ever wished you could just tell your invoicing software what to do, without clicking through menus, pulling up reports manually, or switching tabs every five minutes, that's exactly what the Zoho MCP server is built for. MCP stands for Model

      • DYK 7 - Set dependency from Gantt and List view

        Did you know task dependencies in Zoho Projects can be managed across different task views? In a project, multiple teams work together towards the same goal but team members prefer accessing data with different perspectives depending on their responsibilities.

      • Goods In Transit

        Hi I was wondering if anyone had any tips or work-around to show goods in transit as a liability? We raise a PO with our supplier in China and when the goods are shipped and are invoiced, hence they are a liability of the business. However I can't convert

      • Accounts Payable and receivable

        I'm currently creating my accounts and noticed that I cannot create any more accounts payable or receivable. Is there any way to create more of this accounts and associate them to the default one available?

      • How to display Pick List values with vertical separation in Canvas

        I have a Multi-Select Pick List whose values I would like displayed vertically. So far, I have only been able to figure out how to adjust the width and other sizing of the field itself or even how to wrap the values to the next line below. I am trying

      • Ability to Use Both AND and OR When Creating Rules (Advanced Conditions)

        I'd like to be able to use more complicated logic when setting up rules. E.g. in Zoho Mail, I can choose "Advanced conditions (AND/OR) to create a rule that can be applied to multiple subject lines from the same sender. But in Zoho TeamInbox, I will have

      • Introducing a knowledge management and training software in Zoho Projects Plus

        Keeping your workforce updated on emerging technology trends is essential to stay on top of the game. While project management software focuses on planning, execution, and project tracking, incorporating a learning management solution within project management

      • Problem with UTM Parameters: Zoho Forms - Zoho Desk Integration

        Hi Zoho Support Team, I want to automatically capture UTM Parameters from my website URLs and pass it from Zoho Forms into Zoho Desk. I have activated the UTM tracking feature. I've integrated the UTM Tracking code in my website footer on all pages. I've

      • #13 Fix Mistakes Without Breaking Your Records

        A customer purchases 100 custom-printed invitations for an upcoming event. A few days after delivery, they call to say that some invitations were damaged and others need to be reprinted. They request a return. The customer isn't asking for a completely

      • Zoho Directory : transformez vos données d’identité en décisions de sécurité

        Que sont les rapports d’identité dans Zoho Directory et pourquoi sont-ils importants? À mesure que les organisations se développent, la gestion des identités devient plus complexe. Les informations existent, mais elles sont souvent réparties entre plusieurs

      • How to use Zoho Billing info in a workflow

        We have Zoho Billing and CRM sync'd and the Billing info appears as expected for each Account in Zoho CRM, including subscription status, plan type etc. But how can we use this in a workflow? Thanks Dylan

      • Why can't we choose Fixed Asset account for Purchased Items? (eTims issue?)

        Hello, When the company purchase items not for sale and not supposed to be in the inventory stock, like equipment for operational use, there is no way to access the Fixed Asset accounts in the drop down list. Is that an eTims limitation again? Or something

      • Auto-approval for shared key access not working for new users

        Hello, I'm an admin of a Zoho Vault organization (34 active users, ZOHO identity provider). I have the "Auto-approval for shared key access" setting enabled in Settings → Fine-Grained Controls → Global, but it does not work as expected. The problem: When

      • Zoho Analytics UI Bug

        Hello, all, The Aggregate Formulas in Zoho Analytics' list of fields have a 3-dot menu: If the formula has a long name, the name is not fully visible in the list, and a 3-dot menu is not accessible from it: This is not convenient, especially when the

      • Canvases Auto-Skewing/Adding Scroll Bars When They Were Not There Prior

        Is anyone else noticing rendering issues in their canvases today? It seems to be mainly icons which now have scroll bars added which makes them all look off, though some fields seemed to revert to squished length as well. Were the icons replaced with

      • Marketing Tip #37: Reduce purchase doubts with better product images

        When customers shop online, they cannot pick up, turn around, or inspect a product in person. That is why your product images need to do more of the selling. Two simple upgrades can make a big difference: Use zoom-friendly images so customers can look

      • Why don't Zia agents support file uploads?

        I am trying to build a Zia Agent that allows uploading of a PDF file and uses the GLM5 model to process it and extract information. But agents.zoho.com has no way to enable file uploads on the agent. Additionally, GLM5 based agents keep outputting their

      • Zia Agent built in ChatKit UI does not render markdown

        Hi, You have a major shortcoming in the Zia Agent UI. The test UI that is embedded in agents.zoho.com allows you to test the agent has full support for rendering markdown, but your ChatKit UI does not have support for rendering markdown. If I embed it

      • Cliq iOS can't see shared screen

        Hello, I had this morning a video call with a colleague. She is using Cliq Desktop MacOS and wanted to share her screen with me. I'm on iPad. I noticed, while she shared her screen, I could only see her video, but not the shared screen... Does Cliq iOS is able to display shared screen, or is it somewhere else to be found ? Regards

      • Zoho Books | Product updates | June 2026

        Hello users, Welcome to this month's roundup of what's new in Zoho Books! We have an exciting line-up this time. The highlight is the launch of the all-new France Edition with full ISCA compliance. We're also introducing features such as Layout Rules

      • Next Page