Hello Everyone,
We appreciate the engaging discussions during the Ask the Experts 19 session on the Spring Release. It was a pleasure connecting with you. Our team is actively working towards your requests to deliver an improved experience.
In this post, we’re excited to highlight the questions and answers from the sessions, including guidance on configuration setups and tips to optimize efficiency for your business. We’re sharing these discussions to benefit the wider community because together, we can enhance our collective knowledge and continue to deliver exceptional service to our customers.
1. How to optimize Agent Response Time and Agent Performance within Zoho Desk?
To accurately measure Agent Response Time and Agent Performance, set up a Service Level Agreement (SLA) within your Zoho Desk Account and link it to the business hours defined in Zoho Desk.
If your agents work during specific hours, e.g. from 9 AM to 5 PM, ensure you create business hours that match your operational timings and associate these hours with your SLA.
This will ensure that response and resolution times are calculated based on your defined business hours. If business hours are not associated with the SLA, response and resolution times will default to calendar hours(24 hours format).
2. How can AWS Infra be configured with Zoho Desk?
Currently, we don't offer a direct integration with AWS Infra. However, you can utilize Zoho Desk APIs to integrate with AWS Infra, enabling you to perform API calls from your system to Zoho Desk.
3. When a ticket is closed and the customer responds, the ticket status does not change automatically. However, when we manually reopen the ticket, the SLA exceeds the defined time. How to configure the SLA so that it does not trigger again upon reopening?
In this case, you can enable the "Customer reply" option within the SLA configuration. This ensures that when a customer replies to a ticket, the SLA is recalculated based on your defined settings.
If the ticket status does not automatically change when a customer responds, check if the "Fall back to default" option is enabled for Closed status under the Ticket Status configuration. You can find this setting by navigating to Setup > Customization > Layouts and Fields > Ticket Status. This will ensure that whenever a customer replies to a ticket in the Closed status, the ticket automatically reverts to the default status.
4. How to prevent unnecessary emails from being converted into tickets and ensure only designated contacts can create tickets via email?
Utilize the filter option available in the forwarding mailbox. Alternatively, a workflow can be implemented to automatically close tickets originating from unwanted email addresses or domains.
5. How can we integrate the automated customer happiness survey process so that it associates directly with the relevant contact and their respective ticket? How to track these responses within reports?
Go to Setup (S) >> Organization >> Customer Happiness. Enter your rating question and select either "To every outgoing Ticket response" or "When a Ticket is closed" from the Add Rating link. Adjust the settings according to your requirements. When a customer rates a ticket, the rating will be available within the ticket as well as the Contact info box in the Tickets properties. To view reports, access the Customer Happiness Dashboard by navigating to Analytics -> Dashboard -> Customer Happiness Dashboard.
6. How to resolve the error encountered when sending marketing messages through WhatsApp templates? Is there any alternative solution we can implement for this?
We are currently exploring possible options with Meta. Specifically, we are checking if it's feasible to send marketing template messages for multiple tickets or contacts at a time without encountering errors.
7. Is it possible to configure a GC flow for Line channel?
This Spring release unfolds for you to create a GC flow specifically for the Line channel and deploy it.Refer this link for details.
8. What is the best method to generate weekly reports such as "Average closure time," "Average number of replies per thread," and especially "Most common types of categorized emails" to get an overview of Agent performances in Zoho Desk?
You can use our default reports to track metrics like average resolution time or average response time or schedule custom reports based on your requirements.
If you're using the Enterprise edition of Zoho Desk, you can set up a report scheduler to send the generated reports to different recipients on a weekly or monthly basis. These scheduled reports can be emailed directly to you, allowing you to view them from your email or device without needing to log into your Zoho Desk account each time.
9. What is the best way to trigger a workflow rule after a specific elapsed time? For example, trigger a workflow after a ticket has been closed for 48 hours.
A workflow is an automation triggered by specific events, such as ticket creation, ticket updates, customer replies, or agent responses. In your scenario, you want an automation to trigger specifically 48 hours after a ticket has been closed.
To trigger automation based on elapsed hours, you should use a supervisor Rules (time-based action), which runs periodically (every hour), checks tickets based on the criteria you configure, and executes the associated actions accordingly.
To set this up, navigate to Automation → Supervisor Rules. Create a rule with criteria such as "Hours since status updated is greater than 48" or "equal to 48," along with an additional criterion like "Status is Closed." The rule will then only apply to tickets that have been closed for at least 48 hours since the last status update.
You can associate specific actions with this rule, such as updating the ticket status or sending a follow-up email to the customer, depending on your requirements.
10. If we use Zoho Desk openAPIs with AWS infra, are the APIs HIPAA compliant?
Yes. Since Zoho Desk is HIPAA compliant, the APIs provided by Zoho Desk are also HIPAA compliant. The data stored within Zoho Desk is already encrypted, ensuring that any API accessing this data remains compliant with HIPAA regulations.
However, If you plan to fetch Zoho Desk data stored in AWS infra using other third-party APIs, please verify those APIs and AWS infrastructure are HIPAA compliant.
11. Can we enable the Analytics module to generate reports for data spanning more than 12 months (or years)?
Currently, we are working on enabling report generation for data exceeding 12 months, and this feature should be available soon. This capability is now available in beta, allowing you to create custom reports with approximately 2 years of data. To enable this beta feature for your organization, please send an email to support@zohodesk.com.
12. Can we manually edit the translations used in the Help Center portal?
Zoho Desk supports multilingual setup. In this configuration, you can export a list of fields and their picklist values from Zoho Desk, then manually adjust the translations into your desired language, and then import them back into Zoho Desk. This will update the translations displayed to both your agents and customers within your Help Center and Desk interface.
If you continue to experience difficulties with the translations, please connect with us.
13. A significant issue I'm facing is that 'out of office' emails are reaching the ticketing system and automatically changing the status from 'on-hold' back to 'open.' Is there a straightforward solution to prevent this?
By default, when a customer replies to a ticket, the ticket status reverts automatically to the default "open" status. With a custom function, we can examine the subject or email, detect "out of office" emails, and ensure the ticket retains its original status instead of reopening.
Note: Custom Functions work in the Enterprise edition.
14. How can we configure an automated parallel or sequential approval process in Zoho Desk, similar to the one available in Zoho CRM?
Blueprints provide a viable solution for managing approvals. We are actively working on enhancing this feature to provide an advanced approval process similar to the one available in Zoho CRM.
15. Is it possible to lock ticket records in Zoho Desk, similar to Zoho CRM? Can we configure response and resolution SLA alerts separately?
We are currently working on providing an option to lock tickets based on a time set by the Admin. Once a ticket is closed, a locking period can be defined. After this locking period expires, the ticket will be fully locked. Any further incoming emails or conversations related to that ticket will automatically generate a follow-up ticket. You can then configure separate resolution and response escalation using SLA based to your requirements.
16. Is there a way to tell the system to send an email to the customer (email ticket), when creating a ticket on behalf of a customer?
Yes, there is an option called "Send As Email" available. You can enable this feature by navigating to Settings > Setup > Customization > Central Settings > Tickets. Once enabled, when you create a ticket, you can add the relevant content in the description, and the system will automatically send an email to the customer when you click "Send as Email" option instead of "Submit" upon ticket creation.
17. How can we add notes to a ticket that are visible at the ticket list level? We don't use tasks because they don't notify agents if the ticket is already closed.
To display notes at the ticket list level, one option is to use a custom multi-line field named "Note," where users can enter any relevant notes directly into the ticket. However, custom fields added to tickets are not visible in the standard ticket list view. To display them, use the "Tickets Table view", which supports showing custom fields, including the multi-line fields like "Note" at the list level. Additionally, custom fields can be used for searching and other functionalities, and these custom field will not visible to your customer.
18. During the ticket approval process, how to include comments explaining why an approval was rejected or approved?
You can utilize blueprints to manage approvals effectively. For instance, you can set up separate transitions for approval and rejection, each containing multiple steps such as adding comments, notes, updating fields, and more. Also, approval transitions within blueprint workflows support widgets. This means you can define specific steps or actions to occur whenever an approval or rejection takes place.
19. Do we have the option to create a task for another department directly, or can we only share an existing task from one department to another? How does inter-departmental task coordination work?
If you're referring to tasks in the Activities module (not tickets):
- You can directly create a task for another department only if you have the required permissions for that department.
- Task sharing between departments is not supported unlike tickets, which can be shared.
- If your profile has access to multiple departments or an "All Departments" view, you'll be able to select the department while creating a task.
- Note: Tasks and tickets are department-specific and cannot be linked across departments.
20. Is there a way to make an entity field mandatory when creating tickets?
If you are referring to custom fields or other fields available in the layout during entity creation, you can set these fields as mandatory within the layout settings. To do this, navigate to the layout section, select the field properties, and enable the option labeled "This field is mandatory." Once enabled, the field will become mandatory both during record creation and when editing existing records.
21. Can telephony integrations with Zoho Desk automatically create tickets for answered calls?
Typically, telephony integrations with Zoho Desk only support automatic ticket creation for missed calls. To automatically create tickets for answered calls, you can implement a Custom Function Workflow.
22. How can I enable the parent-child ticketing feature in Zoho Desk?
To enable the parent-child ticketing feature, please raise a request through this form, and we will enable it for you.
23. Is there a way to update a picklist value from A to B in tickets layout?
Within the layouts for picklist fields, there is an option called "Replace Values." When you use this option, the system will replace the old value with the new value you specify and automatically update all previous records accordingly.
24. What is a Lifecycle report, and how is it different from the History tab?
The Lifecycle report allows you to categorize and filter specific events related to status updates, department changes, event owners, and time frames.
In contrast, the History tab provides complete details of all events and entries related to a ticket.
The History tab shows every action taken on a ticket, while the Lifecycle report focuses specifically on selected events, providing a more targeted view.
25. Where can I find the "Ticket and Thread Summary" feature in Desk?
We recently updated the UX/UI for ticket summaries. Now, when you open any ticket in the detailed view, you'll see a button called "Zia Summary" at the top. Clicking this button to generate a summary of the entire ticket, including the subject, incoming and outgoing conversations, private comments, and public comments.
26. Can I customize the Zia summary to display specific information?
Yes, you can customize the Zia summary. For example, you can choose to summarize only incoming messages to understand the user's query, or only private comments to review internal discussions. You can select these options within the Zia summary feature.
27. How can I summarize individual threads within a ticket?
To summarize individual incoming or outgoing threads, click on the "More" icon next to the thread. Under the AI section, you'll find the "Summarize" option, which allows you to generate a thread summary. Refer here for details.
28. Is the Table view for tickets available for "All Departments"?
Currently, the Table view support for tickets across all departments is under implementation and not yet available.
29. What is Multilingual Support in the Customer Happiness rating feature?
Multilingual Support is a feature that allows you to present customer happiness rating forms in multiple languages. Previously, these forms were available only in English. With Multilingual Support, you can offer customer happiness surveys in the customer's preferred language, improving the accuracy and quality of the feedback you receive. Currently, we support more than 27 languages.
30. How can I configure translations for the customer happiness rating questions and choices?
You can configure translations for each question and choice under the Languages-Multilingual from Setup > Customization > Languages. Translate the questions and choices, and these translations will be displayed to customers based on their language preferences.
31. How does the system determine which language to display to the customer?
If the customer is a registered end-user in the help center, the system automatically detects and uses the language based on the user's preferences. If the customer is not registered, the system will use the language specified in the language field of the ticket to determine which language to display.
32. What is the Blueprint feature, and how does it work?
Blueprint is a feature designed to streamline and enforce specific processes that agents must follow when handling tickets. It ensures consistency and adherence to defined workflows.
For example, if you run an e-commerce store and want your agents to follow a specific process before changing a ticket status (such as from "open" to "on hold," or "on hold" to "refund initiated"), you can use Blueprint to define the required steps. This might include actions such as sending a reply to the customer, adding proper comments, or updating specific fields before allowing the status change.
33. What are the benefits of implementing Blueprint in ticket handling?
Implementing Blueprint helps ensure that agents follow a consistent, structured process when managing tickets. It enforces required actions and transitions, improving overall efficiency, accuracy, and quality of customer service.
34. When an Agent creates a ticket in one department and the ticket is moved to another department, the original creator loses visibility of that ticket because they don't belong to the receiving department. The ticket only becomes visible only if the ticket is shared to the creator's department again. Using the help center as an alternative is inconvenient because users must access a separate portal and cannot view internal notes. How can you address this?
Currently, Zoho Desk operates with department-specific categorization for both agents and tickets. If an agent (Agent A) has access only to Department A, they can only view tickets within Department A. Once a ticket created by Agent A is moved to Department B, Agent A loses visibility unless the ticket is explicitly shared back with their original department. Allowing agents to view tickets from departments they don't belong would cause conflict with the core concept of department-specific categorization, data privacy, and sharing policies. So, an agent can only access tickets within departments they have explicit access to, even if they created the ticket.
35. Have you encountered an issue where, when two department emails are mentioned in the 'To' address, a ticket is created in only one department instead of both? We have a mail service provider that auto-forwards emails individually to Desk support emails. After disabling the merge function, we noticed duplicate conversations appearing in the same department rather than separate tickets in two different departments. Why is this happening?
To identify why tickets aren't created in both departments when two department emails are included in the 'To' address, we need to analyze the email headers or the delivery method used by your mail service provider. This analysis will help us understand why the ticket is created in only one department and why both conversations appear in the same ticket. Please send us a sample email that should have created tickets in both departments to support@zohodesk.com. We will analyze it and provide you with a possible solution or pinpoint exactly where the issue lies.
36. How to send one email to multiple departments from Zoho Desk?
Currently, Zoho Desk does not support sending a single outgoing email directly to multiple departments. However, you can consider alternative methods:
- Use the CC field to include multiple recipients.
- Set up workflow automation to notify multiple email addresses using the recent thread content placeholder.
37. When reviewing analytics reports on resolution time, how is the time calculated for tickets in 'On Hold' status?
When generating a report based on resolution time, the resolution time calculates both open and on-hold time. However, if you generate reports specifically based on agent performance, the resolution time calculation excludes the on-hold time.
38. Is it possible to allow certain customers to view Analytics dashboards?
To provide access to analytics dashboards for specific customers, there are two possible approaches:
a. Create customized dashboards and embed them in your Help Center using custom widgets. (or)
b. You can add these customers as "light agents," allowing them limited access to preview specific dashboards.
39. Is it possible to include detailed information within the email body of reminder and comment notifications?
You can include detailed information in email notifications by adding placeholders like "Recent Thread" or "Recent Comment" to your email templates. This ensures the actual comment or thread content appears in the email body, rather than just a link.
40. Can we upload video recordings directly into the Knowledge Base?
Yes, you can upload video recordings directly into the Knowledge Base editor using the attachment option. The attachment feature supports files up to 20 MB. Alternatively, you can use cloud storage options to include larger video files.
41. Is there a way to view Zoho Desk tickets within Zoho CRM seamlessly?
Yes, it is possible to view Zoho Desk tickets alongside CRM contacts or accounts by integrating Zoho Desk with Zoho CRM. This integration allows you to access and manage Desk tickets directly within your CRM, creating a seamless experience for your team.
41. How can agents be notified that a customer has open tickets in other departments, even if they don’t have access to those departments?
There is a permission available that allows users to search for tickets across departments. Tickets from other departments can be displayed in a search view, even if the agent does not have direct access to those departments. To notify agents of tickets in other Departments, enable the permission Access Data across Departments.
42. Can we export ticket view results based on applied filters such as agent, timeframe, classification, status, or other criteria?
Zoho Desk supports exporting tickets classified under a custom view. However, filters applied directly within the tickets view are personal and temporary, and exporting these filtered results is on our roadmap.
Here are the recordings from our Ask the Experts 19 sessions:
Recent Topics
How to restrict user/portal user change canvas view
Hi , I would like to restrict user / portal user change their canvas view because I hide some sensitive field for them. I dont want my user switch the canvas view that do not belong to them But seems Zoho do not provide this setting?
Live webinar: Craft and deliver impactful slides with Show’s desktop apps
If you love the comfort of working on your desktop and want a setup that keeps you focused and uninterrupted, this session is made for you. We’re excited to invite you to our upcoming live webinar: "Craft and deliver impactful slides with Show's desktop
Reupload and rename from one field to another field (file upload)
Hi Everyone, Sorry, i have question to use invoke url for rename and reupload attachments file to another field. Tested on development mode. Zoho C6. Refer to https://www.zoho.com/creator/help/api/v2/upload-file.html look my error notification. Does anyone
Enhancements to Bigin's forms
Greetings, I hope all of you are doing well. We're happy to announce a few recent enhancements we've made to Bigin's forms. We'll go over each one in detail. Merge field support in auto-filled forms The auto-fill option in Bigin's forms lets you predefine
Table dimensions
I try changing the dimensions of the table on my computer but it doesn't change. Do I have to be a premium member or does it only work on the app?
Ask the Experts 25: Experience the full spectrum of Zoho Desk’s autumn and spring releases for 2025
Hello Everyone, We’re on the 25th episode of our ATE series! It's a true milestone in our live community interactions! It’s been an amazing journey since we started in October 2018. Zoho Desk has come a long way, evolving with the support of a wonderful
Direct link to Record Summary
Hi everyone, In one of my reports, I have built a Record Summary template to display the details of one record. I would like to be able to link directly to this Record Summary once I submit a new record, without having to go to the list of records first and click on View. Is there a possibility to do so ? Should I use the URL by passing some parameters ? Thank you very much for your help ! Guillaume
Amendment effective date
Hi everyone, I noticed that the amendment effective date mentionned in my amendment is not right. Indeed, when a contract is amended several times, it states the previous amendment and their effective date. However, the effective date stated is always
STOCK history in zohosheets
is it possible to get historical stock value using stock function in zoho sheets? i could not see from and to period in the helper document.
Auto sync Photo storage
Hello I am new to Zoho Workdrive and was wondering if the is a way of automatically syncing photos on my Android phone to my workdrive as want to move away from Google? Thanks
Can't add a sender adress from zoho campaigns
hi, I need to change the sender address for a campaign. When i try to add it i get a message to say 'duplicated email address found while adding your sender address'. This is the first campaign i'm sending so I don't understand why this message is displayed? Thanks Jane
Zoho Webinar custom registration fields into Zoho CRM
I am pushing webinar registrations into zoho crm as leads and this is working fine. I have added a few custom fields to my webinar registration and I wish for these fields values to get mapped into the resulting CRM lead record. I am not seeing anywhere
Zoho Desk Training
Hello, We've had Zoho desk for a while now, but we run into issues occasionally, and I was wondering if there was a customer who currently uses it and really enjoys the functionality, that would be wiling to chat with us?
Introducing parent-child ticketing in Zoho Desk [Early access]
Hello Zoho Desk users! We have introduced the parent-child ticketing system to help customer service teams ensure efficient resolution of issues involving multiple, related tickets. You can now combine repetitive and interconnected tickets into parent-child
Text/SMS With Zoho Desk
Hi Guys- Considering using SMS to get faster responses from customers that we are helping. Have a bunch of questions; 1) Which provider is better ClickaTell or Screen Magic. Screen Magic seems easier to setup, but appears to be 2x as expensive for United States. I cannot find the sender id for Clickatell to even complete the configuration. 2) Can customer's reply to text messages? If so are responses linked back to the zoho ticket? If not, how are you handling this, a simple "DO NOT REPLY" as
Agent password reset
Hi Zoho support, I would like to ask if there is a way the admin can reset a password of an agent? Regards
Group Calendar as Default for adding new events, etc?
Hi, I want to make the group calendar (that I created, if that makes a difference) the default for anything new I add to the calendar. How can I do that? thanks.
Can receive but not send messages in Zoho Mail
Hello! I was able to configure my email client successfully in that I can receive messages just fine. However, when I send messages out, they seem to go out fine (I don't receive any errors or anything), but the recipient does NOT receive those messages.
Why is Zoho Meeting quality so poor?
I've just moved from Office 365 to Zoho Workplace and have been generally really positive about the new platform -- nicely integrated, nice GUI, good and easy-to-understand control and customisation, and at a reasonable price. However, what is going on
Mail is sent twice!
Been using Zoho for a while now. Installed Zoho for someone else and some weird things are happening. Mails are being sent twice. He is using Thunderbird as an email client. I already read about email being duplicated in the sent folder. But in my case
Can't login IMAP suddenly
Since this evening I'm getting the error: You are yet to enable IMAP for your account. Please contact your administrator... IMAP always been enabled in my account and was workign fine for the past 7 years. Already tried turning IMAP off and on again.
Sending of username did not succeed: Mail server pop.zoho.com responded: User already specified
I am having issues receiving emails from Zoho in Thunderbird. I am getting the above error. The first error tells me Authentication failed, and prompts me to enter in my password. Then I get the above error. I can receive emails when I log in online to
Bug tracking
Hi, does anyone know how to track errors during picking or packing? This way I can keep track and see how to improve and prevent errors in this area.
Exact match in name when searching workdrive
Hello, I am wondering how to search workdrive files/folders with an exact match in the name. For example, when I search across folder with the url param search[name]=someName, I get multiple results such as "someName", "someNameAndMore", or "someName
Not Receiving Incoming Mail
I can send emails from my account but I do not receive any. I originally set up forwarding and it worked for a while and then stopped. I turned off forwarding and now do not receive any emails. Could you please check what is causing this issue? Thank you
Flow - Fetch info from drop down in another module
I am running into a road block which I thought would be a simple task. My goal - The account is assigned to a "route" which can be selected from a drop down menu and adds a tag to the account accordingly (easy enough). Now when I create a task for this
Migration of corporate mail environment from Yandex 360 to Zoho mail
I have to migrate a corporate mail environment with an existing domain from Yandex 360 to Zoho mail. It is vital to migrate all users with all the data. I have read the article on this topic using MacMister Email Backup Software just now and have some
I'm unable to send mail pthrough Zoho SMTP programmatically
This has been working for years, but today it's been offline all day long. I see nothing anywhere on your site about this. I'm not the only one experiencing this. Downdetector has a spike of reports today
Can no longer send email via Django site
This was working fine as of 11/7/25. Now I am unable to send user verification emails from a Django site on a AWS lightsail sever. When a user attempts to register the following error occurs. I have also attempted to send a test email via the shell and
unable to send email but able to receive email
my email address is info@securityforceservices.ca
Custom Field for Subscription
Hi, I can't find a way to add a custom field (to contain a license key generated from our software) against a subscription? Is the only place to add this information in the Invoice module (as custom field for invoice)? When a customer views his subscription via the customer portal, there appears no way to display a license key for them? The invoice is not the natural place to store a license key for a particular subscription, so where else can this be stored and displayed?
Login to server failing
When trying to retrieve my mail, I am getting this error message -- Login to server pop.zoho.com with username (my email address) failed. It gives me the option to retry, enter password, or cancel. Then I get this message -- Sending of username did not
Configuration failed: 200 response not received for POST request.
Hello, I am trying to set up a webhook to connect with an Salesforce but I receive the following error from Zoho: Configuration failed: 200 response not received for POST request I have tried testing it on webhook.site as well and receive the same error
Zoho Migration Assistant not working
Hello, I am trying to use you Migration assistant to migrate emails from Rediff to Zoho. I am stuck in the first step. After downloading the migration tool, I copied the link to verify user credentials, however, after pasting the link in the browser,
Paid Support Plans with Automated Billing
We (like many others, I'm sure) are designing or have paid support plans. Our design involves a given number of support hours in each plan. Here are my questions: 1) Are there any plans to add time-based plans in the Zoho Desk Support Plans feature? The
Scheduled Reports - Do not send empty report
Hello, We are intensively using reports in the CRM, especially for sales managers. When data is empty, they still receive an email. Can you add an option to avoid sending the report when data is empty?
Mark As Read Sync?
So I set up Zohomail to use my personal gmail account in it as well. I was wondering, when I mark the gmail email as read in Zohomail, can it automatically mark it as read in my gmail account as well?
Contacts Missing — PeopleSync/Zoho Mail
English: In our company we use ManageEngine Mobile Device Manager (MDM), Free edition, to manage corporate mobile devices. Our usage policy does not allow personal Google accounts on these devices; therefore, Google account sync is blocked through MDM.
Best way to integrate Zoho with mobile app for managing customer requests with real-time notifications?
Hello, I'm building a solution for a travel company where customers submit requests through a website, and the sales team manages these requests through a mobile app. The Requirement: Customers fill a form on the website (name, email, number of children,
Kaizen #57 - Mass Update API in Zoho CRM
Hello everyone! Welcome back to yet another post in the Kaizen series. This week, we will discuss the Mass Update API in Zoho CRM. In this post, we will cover the following: 1. Introduction 2. Mass Update Records API 3. Schedule Update and Get Status
Next Page