In contemporary email communication, email authentication plays a pivotal role in mitigating email fraud, spam, and phishing attacks. Brace yourself for a new level of security. Starting February 2024, Gmail and Yahoo will be implementing robust email authentication requirements to combat harmful messages and emphasize the crucial role of data security. This measure aims to prevent restrictions on sending rates, message blocking, and marking messages as spam.

Who will experience the effects?
The updated security guidelines apply to all users, particularly those who send 5000 or more than 5000 emails per day from ZOHO DESK. Not following these guidelines may lead to email delivery delays, blocked messages, or the categorization of emails as spam.
Not to worry. We are here to support you with the best possible solutions.
Basic details that every sender should be aware of
To safeguard your path in 2024, it is mandatory to follow the fundamental requirements, beginning with email authentications.
When utilizing a Gmail domain in the 'From' address, it is essential to configure the address with its dedicated SMTP for ensuring accurate mail delivery.
For recipients on gmail.com or googlemail.com, it is recommended to publish DMARC for the sender domain to enhance prompt mail delivery.
Verify with your own SMTP
In adherence to the new guidelines, reply emails sent from Zoho Desk with From addresses belonging to gmail.com, googlemail.com, to any domains may be bounced or marked as spam. Therefore, we kindly request all customers to configure these From addresses with your own SMTP verification and use TLS for transmitting email rather than Zoho SMTP. If the From addresses were verified previously with your own SMTP, we will continue using the same authentication for all notification emails sent from Zoho Desk.
Rolling out SPF & DKIM
SPF (Sender Policy Framework) and DKIM (DomainKeys Identified Mail) are vital email authentication protocols that protect against spam, phishing, and spoofing. SPF verifies the authenticity of emails from your domain, while DKIM confirms their source by validating authorized servers associated with sending domains. These protocols work together to validate emails, ensuring that they originate from legitimate sources and have not been tampered with during transmission. This implementation enhances the overall security of your email communications by reducing the risk of email spoofing, phishing, and other malicious activities.
Minimal Spam Rate
Maintain spam rates below 0.10% and ensure they never exceed 0.30% for optimal email deliverability.
Essential Requirements for Users Sending 5000 or More Emails Daily
Implement DMARC Policy
DMARC (Domain-based Message Authentication Reporting and Conformance) is an authentication technique that leverages the Sender Policy Framework (SPF) and DomainKeys Identified Mail (DKIM) to authenticate emails. This helps in preventing forging emails and engaging in unauthorized activities through them.
How DMARC Works:
1: Publish the DMARC policy outlining instructions for mailbox providers' receiving servers on how to handle emails that breach the policy.
2: Authenticate your sender domain by implementing SPF and DKIM.
3: The receiving server will apply the DMARC policy and execute the instructions specified in the policy.
4: The receiving server will send a report detailing how it handled the email to the reporting email address specified in the DMARC record.
Sample: DMARC record
v=DMARC1\; p=none\; rua=mailto:dmarc-aggregate@mydomain.com\; ruf=mailto:dmarc-afrf@mydomain.com\; pct=100
v: Signifies the DMARC version in use.
p: Signifies the policy established by the business.
rua: Specifies the URI for sending a consolidated report, including information on SPF and DKIM validation results, details about the sending and receiving domains, and the percentage of successful authentications.
ruf: Specifies the email address where the comprehensive SPF/DKIM failure report will be delivered.
pct: Denotes the percentage of emails subject to the policy application.
To prevent emails from being marked as spam, bounced, or experiencing delays in delivery, it is mandatory to set your policy (p) to none in DMARC record. “p = none”
If the policy (p) is set to "quarantine" or "reject," the emails will either be redirected to the spam folder or will not be delivered to the recipient, respectively.
Ensure DMARC Alignment
DMARC alignment pertains to the uniformity in the alignment of email authentication mechanisms, particularly SPF (Sender Policy Framework) and DKIM (DomainKeys Identified Mail), with the domain asserted by the sender.
Sample DMARC - SPF Alignment
Sender Address | From: Header | Strict Alignment | Relaxed Alignment |
support@mycompany.com | support@mycompany.com | Pass | Pass |
support@admin. mycompany.com | support@mycompany.com | Fail | Pass |
support@mycompany.org | support@mycompany.com | Fail | Fail |

SPF Strict Alignment: A precise match between the SPF-authenticated domain and the domain specified in the header's "From:" address.
SPF Relaxed Alignment: The domain indicated in the "From:" address of the header should either match or be a subdomain of the SPF-authenticated domain.
Sample DMARC - DKIM Alignment
From: Header | DKIM d= domain | Strict Alignment | Relaxed Alignment |
support@mycompany.com | mycompany.com | Pass | Pass |
support@admin. mycompany.com | mycompany.com | Fail | Pass |
support@mycompany.org | mycompany.com | Fail | Fail |

DKIM Strict Alignment: A precise match between the relevant DKIM domain and the domain specified in the header's "From:" address.
DKIM Relaxed Alignment: The domain mentioned in the "From:" address of the header must either coincide with or be a subdomain of the SPF-authenticated domain.
Add ARC headers
Implement ARC (Authenticated Received Chain) authentication to avoid Gmail categorizing the email as unauthenticated, especially when utilizing frequent mail forwarding practices.
For additional information on ARC authentication, please refer to the official Google document linked here.
Set up SPF & DKIM
Mail authentication protocols such as SPF & DKIM should be implemented for organization sending emails to google or yahoo recipients.
What are the consequences if the deadline is not met?
Adhering to the sender requirements before the deadline is crucial for optimizing email delivery. Failure to meet the criteria detailed in this article may lead to your email not reaching its destination as intended or being categorized as spam.
Quick Summary:
The Update - Gmail and Yahoo are implementing robust email authentication standards from February 2024.
The Effects - Failure to meet these requirements may result in emails being categorized as spam or not reaching their intended destination.
The Action to be taken - Users sending 5000 or more emails daily must implement SPF, DKIM and publish DMARC policies.
Regards,
Sumaya Howth - Product Manager
The Zoho Desk Team
Recent Topics
Why I am unable to configure Zoho Voice with my Zoho CRM account?
I have installed Zoho Voice in my Zoho CRM, but as per the message there is some config needed in Zoho Voice interface. But when I click on the link given in the above message, I get an access denied page.
Feature Request: Ability to Set a Custom List View as Default for All Users
Dear Zoho CRM Support Team, We would like to request a new feature in Zoho CRM regarding List Views. Currently, each user has to manually select or favorite a custom list view in order to make it their default. However, as administrators, we would like
Adding Multiple Products (Package) to a Quote
I've searched the forums and found several people asking this question, but never found an answer. Is ti possible to add multiple products to a quote at once, like a package deal? This seems like a very basic function of a CRM that does quotes but I can't
Zoho Commerce in multiple languages
When will you be able to offer Zoho Commerce in more languages? We sell in multiple markets and want to be able to offer a local version of our webshop. What does the roadmap look like?
How to create auto populate field based on custom module in Zoho CRM?
Hello, i'm still new to Zoho CRM and work as administrator in my company. Currently, I'm configuring layout for Quotes Module. So, the idea is, I've created a read-only field in Quotes called "Spec". I want this field automatically filled with Specification
Making digital signatures accessible to all: Introducing accessibility controls in Zoho Sign
Hi there! At Zoho Sign, we are committed to building an inclusive digital experience for all our users. As part of our ongoing efforts to align with Web Content Accessibility Guidelines (WCAG), we’re updating the application with support that will go
Need to extract date from datetime field
I have a datetime field and need only the date part from it. I am unable to find a built-in function that would be <DateTime>.Date(). I don't think I want to go the string conversion route of converting the datetime to string and then parsing out values and create a date out of it. Any one out there has a better solution to this? Thanks in adavnce. Regards Moiz Tankiwala Smart Training & IT Solutions
Is there a way to set Document Owner/Sender via the API
When sending requests for zoho sign, it would seem zoho uses the id of the person that created the zoho api cred to determine the owner_id, is there a way to set a default for this?
Transition Criteria Appearing on Blueprint Transitions
On Monday, Sept. 8th, the Transition criteria started appearing on our Blueprints when users hover over a Transition button. See image. We contacted Zoho support because it's confusing our users (there's really no reason for them to see it), but we haven't
Delegates should be able to delete expenses
I understand the data integrity of this request. It would be nice if there was a toggle switch in the Policy setting that would allow a delegate to delete expenses from their managers account. Some managers here never touch their expense reports, and
Add Save button to Expense form
A save button would be very helpful on the expense form. Currently there is a Save and Close button. When we want to itemize an expense, this option would be very helpful. For example, if we have a hotel expense that also has room service, which is a
Using Zoho Desk to support ISMS process
Hi, I am evaluating using Zoho Desk for security incident management. This seems to be aligned with Zoho Desk purpose as its just another type of incident. However in security incident management, ideally I can link incidents (tickets) with a risk from
Regarding the integration of Apollo.io with Zoho crm.
I have been seeing for the last 3 months that your Apollo.io beta version is available in Zoho Flow, and this application has not gone live yet. We requested this 2 months ago, but you guys said that 'we are working on it,' and when we search on Google
Open filtered deals from campaign
Do you think a feature like this would be feasible? Say you are seeing campaign "XYZ" in CRM. The campaign has a related list of deals. If you want to see the related deals in a deal view, you should navigate to the Deals module, open the campaign filter,
MTD SA in the UK
Hello ID 20106048857 The Inland Revenue have confirmed that this tax account is registered as Cash Basis In Settings>Profile I have set ‘Report Basis’ as “Cash" However, I see on Zoho on Settings>Taxes>Income Tax that the ‘Tax Basis’ is marked ‘Accrual'
Limiting search or dependencies with an asterisk "*".
I have a form with several dependency fields with options still developing for each field. Since these options were developing and not yet ready to be a selection in the field, I placed a filter for the dropdown field. In this filter, I selected fields
workflow not working in subform
I have the following code in a subform which works perfectly when i use the form alone but when i use the form as a subform within another main form it does not work. I have read something about using row but i just cant seem to figure out what to change
Fetch data from another table into a form field
I have spent the day trying to work this out so i thought i would use the forum for the first time. I have two forms in the same application and when a user selects a customer name from a drop down field and would like the customer number field in the
Zoho Creator as LMS and Membership Solution
My client is interested in using Zoho One apps to deploy their membership academy offer. Zoho Creator was an option that came up in my research: Here are the components of the program/offer: 1. Membership portal - individual login credentials for each
Zoho FSM API Delete Record
Hi FSM Team, It would be great if you could delete a record via API. Thank you,
Record comment filter
Hi - I have a calendar app that we use to track tasks. I have the calendar view set up so that the logged in user only sees the record if they are assigned to the task. BUT there are instances when someone is @ mentioned in the record when they are not
Group Tax in Service Line Items
Hi FSM Team! I noticed that when you update a tax in the service line item the group tax is not showing up as an option. Let me know what can be done thank you!
How to View Part Inventory and Warehouse Location When Creating a Work Order in Zoho FSM
Hi everyone, We’re currently setting up Zoho FSM and would like to improve how our team selects parts when creating a Work Order. Right now, when we add a part or item to a Work Order, we can select it from our Zoho Inventory list but we don’t see any
FSM too slow today !!
Anybody else with problem today to loading FSM (WO, AP etc.)?
CRM x WorkDrive: File storage for new CRM signups is now powered by WorkDrive
Availability Editions: All DCs: All Release plan: Released for new signups in all DCs. It will be enabled for existing users in a phased manner in the upcoming months. Help documentation: Documents in Zoho CRM Manage folders in Documents tab Manage files
Not able to Sign In in Zoho OneAuth in Windows 10
I recently reset my Windows 10 system, after the reset when I downloaded the OAuth app and tried to Sign In It threw an error at me. Error: Token Fetch Error. Message: Object Reference not set to an instance of an object I have attached the screenshot
Mapping a custom preferred date field in the estimate with the native field in the workorder
Hi Zoho, I created a field in the estimate : "Preferred Date 1", to give the ability to my support agent to add a preferred date while viewing the client's estimate. However, in the conversion mapping (Estimate to Workorder), I'm unable to map my custom
Runing RPA Agents on Headless Windows 11 Machines
Has anyone tried this? Anything to be aware of regarding screen resolution?
Sync Contacts in iOS
What does the "Sync Contacts" feature in the iOS Zoho Mail app do?
The sending IP (136.143.188.15) is listed on spamrl.com as a source of spam.
Hi, it just two day when i am using zoho mail for my business domain, today i was sending email and found that message "The sending IP (136.143.188.15) is listed on https://spamrl.com as a source of spam" I hope to know how this will affect the delivery
Delegates - Access to approved reports
We realized that delegates do not have access to reports after they are approved. Many users ask questions of their delegates about past expense reports and the delegates can't see this information. Please allow delegates see all expense report activity,
Split functionality - Admins need ability to do this
Admins should be able to split an expense at any point of the process prior to approval. The split is very helpful for our account coding, but to have to go back to a user and ask them to split an invoice that they simply want paid is a bit of an in
What is a a valid JavaScript Domain URI when creating a client-based application using the Zoho API console?
No idea what this is. Can't see what it is explained anywhere.
Is there a way to request a password?
We add customers info into the vaults and I wanted to see if we could do some sort of "file request" like how dropbox offers with files. It would be awesome if a customer could go to a link and input a "title, username, password, url" all securely and it then shows up in our team vault or something. Not sure if that is safe, but it's the best I can think of to be semi scalable and obviously better than sending emails. I am open to another idea, just thought this would be a great feature. Thanks,
How can I see content of system generated mails from zBooks?
System generated mails for offers or invices appear in the mail tab of the designated customer. How can I view the content? It also doesn't appear in zMail sent folder.
Single Task Report
I'd like a report or a way to print to PDF the task detail page. I'd like at least the Task Information section but I'd also like to see the Activity Stream, Status Timeline and Comments. I'd like to export the record and save it as a PDF. I'd like the
Auto-response for closed tickets
Hi, We sometimes have users that (presumably) search their email inbox for the last correspondence with us and just hit reply - even if it's a 6 month old ticket... - this then re-opens the 6 month old ticket because of the ticket number in the email's subject. Yes, it's easy to 'Split as new Ticket', but I'd like something automated to respond to the user saying "this ticket has already been resolved and closed, please submit a new ticket". What's the best way to achieve this? Thanks, Ed
How to Push Zoho Desk time logged to Zoho Projects?
I am on the last leg of my journey of finally automating time tracking, payments, and invoicing for my minutes based contact center company - I just have one final step to solve - I need time logged in zoho desk to add time a project which is associated
Cannot access KB within Help Center
Im working with my boss to customize our knowledge base, but for some reason I can see the KB tab, and see the KB categories, but I cannot access the articles within the KB. We have been troubleshooting for weeks, and we have all permissions set up, customers
Export to excel stored amounts as text instead of numbers or accounting
Good Afternoon, We have a quarterly billing report that we generate from our Requests. It exports to excel. However if we need to add a formula (something as simple as a sum of the column), it doesn't read the dollar amounts because the export stores
Next Page