Auparavant, l'automatisation dans les modèles de fusion de Writer se limitait à des actions simples comme « fusionner et stocker », « fusionner et envoyer par e-mail » ou « fusionner et envoyer pour signature ». En revanche, il était jusqu’à présent impossible de combiner plusieurs modèles dans un seul document, de choisir un modèle selon des critères précis, ou encore d’envoyer plusieurs fichiers en pièce jointe d’un même e-mail.Le nouveau concepteur de flux d'automatisation change la donne. Grâce à son approche intuitive et sans code, il permet de gérer facilement des scénarios complexes.
Vous pouvez désormais réaliser des actions avancées, telles que marquer un document comme final, le fusionner avec un autre, ou le convertir en PDF ou en feuille de calcul — tout en préservant les paramètres du modèle.Il est aussi possible de déplacer les documents dans des dossiers spécifiques, de mettre en pause une collaboration, de résoudre les commentaires, etc.
Comment utiliser le concepteur de workflows d'automatisation
Il propose une interface intuitive en glisser-déposer permettant d’organiser des cartes d’action, de définir la logique du flux via des connexions, et de configurer chaque action selon vos besoins. Par exemple, vous pouvez utiliser des cartes pour sélectionner des modèles et définir des règles afin de diriger automatiquement le flux selon différents scénarios.
Il vous suffit de faire glisser les cartes souhaitées sur le canvas, de les organiser en groupes, et de créer ainsi des flux de travail complets et cohérents, sans effort.
Découvrons maintenant quelques cas d’usage concrets en entreprise pour mieux comprendre les avantages de ce concepteur de flux.
1. Adapter le mode de distribution en fonction des conditions
Contexte : une fondation doit envoyer des reçus de dons à ses donateurs.
Problème : certains donateurs ont une adresse e-mail, d’autres non.
Solution : les reçus sont envoyés par e-mail aux donateurs qui disposent d’une adresse électronique. Les autres doivent venir retirer leur reçu imprimé au bureau.
Fonctionnement avec le concepteur de flux d’automatisation
- Déclenchement : l’automatisation démarre dès que les reçus sont prêts.
- Création des reçus : un reçu personnalisé est généré pour chaque donateur.
- Filtrage : la carte "Filtrer les données" sépare les donateurs en deux groupes, selon la présence d’une adresse e-mail :
- Port 1 : avec adresse e-mail
- Port par défaut : sans adresse e-mail
- Distribution :
- Les reçus des donateurs avec adresse e-mail sont envoyés automatiquement par mail.
- Pour les autres, un webhook prévient l’équipe chargée d’imprimer et de conserver les reçus pour remise en main propre.
2. Choix automatisé du modèle de document selon le filtrage des données
Contexte : un cabinet d’avocats propose trois services : conseil, contentieux et consultation, et doit générer le contrat correspondant à chaque service.
Problème : différents modèles existent, et il faut automatiquement utiliser le bon modèle selon le service sélectionné par le client.
Solution : grâce aux cartes de filtrage du concepteur d’automatisation, vous pouvez définir des règles pour choisir automatiquement le modèle adéquat.
Fonctionnement : l’automatisation démarre dès que le client choisit un service et valide le formulaire.
La carte Filtrer les données examine le type de service choisi et génère le contrat à partir du modèle correspondant :
- Consultation → modèle Consultation
- Conseil → modèle Services de conseil
- Contentieux → modèle Engagement contentieux
Le contrat généré est ensuite envoyé par e-mail au client.
3. Générer automatiquement plusieurs contrats selon les services sélectionnés
Contexte : le cabinet d’avocats permet désormais à ses clients de sélectionner plusieurs services juridiques simultanément (ex. : conseil, contentieux, consultation). Il faut donc générer un contrat pour chaque service sélectionné.
Problème : lorsque les clients ne pouvaient choisir qu’un seul service, il suffisait de filtrer les données et d’utiliser un modèle unique. Avec des choix multiples, le nombre de combinaisons possibles rend les flux complexes à configurer et à maintenir. Par ailleurs, l’ajout de nouveaux services nécessite de modifier les conditions existantes.
Solution : grâce à la carte de routage, chaque service est traité indépendamment. Le système détecte automatiquement tous les services sélectionnés et génère les contrats correspondants via des chemins distincts.
Fonctionnement :
- Le flux est déclenché à la soumission du formulaire par le client.
- La carte de routage vérifie les services sélectionnés.
- Le système génère tous les contrats correspondants (1, 2 ou 3 modèles selon le cas).
Tous les contrats générés sont envoyés par e-mail au client.
Gérer vos workflows devient plus simple avec le nouveau concepteur :
- Vous disposez d'une vision globale pour mieux comprendre et maîtriser chaque étape du flux.
- Vous pouvez insérer de nouvelles actions ou ajuster des conditions à tout moment, sans devoir reconstruire l’ensemble, ce qui rend l’évolution du workflow fluide et flexible.
Prêt à dynamiser vos workflows d’automatisation ?
Découvrez les fonctionnalités avancées de fusion de documents proposées par Zoho Writer.
N’hésitez pas à nous faire part de vos commentaires, et consultez notre
guide complet pour une prise en main détaillée.
L'équipe Zoho France
Recent Topics
Reference lookup field values in Client script
hello all, I'm using a "ZDK.Apps.CRM.Products.searchByCriteria" function call, which is returning the matching records correctly; however, one of the fields is a lookup field which I need the associated data. I believe there is a way to get this data
In App Auto Refresh/Update Features
Hi, I am trying to use Zoho Creator for Restaurant management. While using the android apps, I reliased the apps would not auto refresh if there is new entries i.e new kitchen order ticket (KOT) from other users. The apps does received notification but would not auto refresh, users required to refresh the apps manually in order to see the new KOT in the apps. I am wondering why this features is not implemented? Or is this feature being considered to be implemented in the future? With the
Every time an event is updated, all participants receive an update email. How can I deactivate this?
Every time an event is updated in Zoho CRM (e.g. change description, link to Lead) every participant of this meeting gets an update email. Another customer noticed this problem years ago in the Japanese community: https://help.zoho.com/portal/ja/community/topic/any-time-an-event-is-updated-on-zohocrm-calendar-it-sends-multiple-invites-to-the-participants-how-do-i-stop-that-from-happening
How can I filter a field integration?
Hi, I have a field integration from CRM "Products" in a form, and I have three product Categories in CRM. I only need to see Products of a category. Thanks for you answers.
How to implement new online payment gateway?
Hello, Can you tell me how to proceed to implement my local payment gateway? DIBS has an open avaiable API that should be easy to implement into ZOHO BOOKS. http://tech.dibspayment.com/dibs_payment_window
Zoho CRM - Portal Users Edit Their Own Account Information
Hi Community, I'm working on a client portal and it seems like the only I can make the Account record editable to the Contact, is if I add another lookup on the Account to the Contact record. Am I missing something as the account already has a list of
Connecting Zoho Mail with Apollo.io
Hi, I am trying to connect my Zoho Mail account with my Apollo.io account to start sending cold email for prospecting purposes. I have activated the IMAP setting but I am still unable to connect to the Apollo account. I am using my email credentials but
Where does this report come from in the Zoho One ecosystems?
Is this directly from MA, Analytics or ??? ???
Contact's title in "Contact Role Mapping"
When I'm creating a deal, I'd like to see the contacts title in the listing. Right now, I only see this: How can I get the contact's title in there?
Zoho CRM - Client Portal - Hide Notes Related List
Hi Community, I'm building a customer portal and I can't find a way to hide the notes related list. I don't want the client to see the notes I have about them. Is there a way to do this as it is no bin/trash icon when I hover over.
"Pivot Table" Conditional Formatting
Team, I there a way to use conditional formatting a "Pivot Table" report? Thanks, Arron Blue Pumpkin Hosting | Solutions Made Simple
How many clients can be added to Zoho Practice?
How many clients can be added to Zoho Practice without having their zoho app?
Stage History
when viewing a ticket , and you look at stage history tab (kanban view) and look at the stage duration column in days, it shows the current stage of the ticket as " current stage ". Should it not rather show the amount of days it has been in that current
Automating Ticket Responses Using Zoho Desk's AI Features
We’re looking to set up an automation within Zoho Desk that can analyze incoming emails or tickets and automatically respond with relevant knowledge base articles based on the content of the request. Could you please guide us on how to configure this
Optimising CRM-Projects workflows to manage requests, using Forms as an intermediary
Is it possible to create a workflow between three apps with traceability between them all? We send information from Zoho CRM Deals over to Zoho Projects for project management and execution. We have used a lookup of sorts to create tasks in the past,
Service locations are tied to contacts?
Trying the system out. And what I discovered is that it seems that the whole logic of the app is, I'd say, backwards. There is a Customer - a company. The company has contact persons and service locations can be associated with different contact persons.
Enhancements to Zoho Map integration tasks
Hello everyone, We're excited to announce enhancements to the Zoho Map integration tasks in Deluge, which will boost its performance. This post will walk you through the upcoming changes, explain why we're making them, and detail the steps you need to
Bug in Total Hour Calculation in Regularization for past dates
There is a bug in Zoho People Regularization For example today is the date is 10 if I choose a previous Date like 9 and add the Check in and Check out time The total hours aren't calculated properly, in the example the check in time is 10:40 AM check
Narrative 12: Sandbox - Testing without the risk
Behind the scenes of a successful ticketing system: BTS Series Narrative 12: Sandbox - Testing without the risk What is a sandbox environment? A sandbox environment is a virtual playground that allows you to test freely and experiment with various elements
Announcing new features in Trident for Mac (1.27.0)
Hello everyone! Trident for macOS (v1.27.0) is here with new features and enhancements to improve scheduling and managing your calendar events. Let's take a quick look at them. Stay aligned across time zones. Both the scheduled and original time zones
Slow uploads of large files
I'm wanting to use Workdrive for transferring large images and video (we're talking things from 100MB-5GB). I'm running solo on a 500MBit/sec fiber connection. I'm getting upload speeds to Workdrive of no more than about 1-3Mbytes/sec when going through
Migrate Your Notes from OneNote to Zoho Notebook Today
Greetings Notebook Users, We’re excited to introduce a powerful new feature that lets you migrate your notes from Microsoft OneNote to Zoho Notebook—making your transition faster and more seamless than ever. ✨ What’s New One-click migration: Easily import
need to upload from airtable to google drive
I have a zapier zap that automates between airtable and google drive. When a customer uploads a new file into airtable via a client portal interface, zapier uploads that file into a folder linked to that customer's project record. I need to replicate
Can't delete functions that are associated with deleted workflow rules
We have a handful of functions that were once associated with a workflow rule, but the rule has been deleted. The function still thinks it is associated so I can't assign it to a new rule. It is starting to get really messy because we have a list of functions
Default Sorting on Related Lists
Is it possible to set the default sorting options on the related lists. For example on the Contact Details view I have related lists for activities, emails, products cases, notes etc... currently: Activities 'created date' newest first Emails - 'created
Credit Management: #1 Credit You Owe vs Credits Owed to the Business
Think about the last time you ordered food online. You might have paid in advance through your card, but you received a $20 refund because your order got delayed or cancelled. In most apps, refunds don't go into the bank account directly; instead, they're
Tip #46- Turn Every Session into an Insight with Zoho Assist survey report- 'Insider Insights'
Delivering exceptional remote support isn’t just about resolving issues, it’s about understanding how both customers and technicians experience each session. That’s where Survey Report in Zoho Assist come in. You can configure and customize survey questions
CRM/Bookings integration edits Contact names
Hi there, I've installed the extension that connects Zoho CRM and Zoho Bookings. When we get a new appointment from Bookings from an existing Contact, that Contact's record shows this: First Name was updated from asd to blank value Last Name was updated
Domain Change
“Please update my Email-in domain from @biginmail.biginmail.in to @biginmail.zoho.com. Messages to the .in domain are bouncing.”
Webhooks Limit Exceeded
Today, I received an error message saying, 'Total number of Webhook call exceeded', but when I look at Manage > Billing, it doesn't look like any of my invokeURL calls are being logged. Following the advice from this thread: https://help.zoho.com/portal/en/community/topic/webhooks-daily-limits-in-zoho-creator
Auto select option in CRM after Zoho Form merge
Hi, I have a dropdown field in Zoho CRM that is filled with a Zoho Form. The data is filled but not automatically shown. After selecting the right value in the dropdown the information a second field is shown. So the question is; how can I make the dropdown
Bring your CRM data straight into your presentations in Zoho Show
Let's say you are working on a presentation about your team's sales pipeline for an upcoming strategy meeting. All the information you need about clients and leads is in Zoho CRM, but you end up copying details from the CRM into your slides, adjusting
Improved RingCentral Integration
We’d like to request an enhancement to the current RingCentral integration with Zoho. RingCentral now automatically generates call transcripts and AI-based call summaries (AI Notes) for each call, which are extremely helpful for support and sales teams.
Introducing New APIs in Zoho Contracts
We are excited to announce the release of new APIs in Zoho Contracts to help you automate and manage every stage of your contract lifecycle more efficiently. Here’s a quick overview of what’s new: 1. Complete Contract Draft You can use this API to complete
Vimeo
For me Vimeo is the most important video social channel for media and filmmakers. Would others agree and like it added to Zoho Social.
Delete a department or category
How do I delete a Department? Also, how do I delete a Category? This is pretty basic stuff here and it's impossible to find.
Organization Emails in Email History
How can I make received Org Emails to show up here?
How to setup pricing in Zoho
Hi everyone, I am relatively new here and have just moved from my old inventory system to the Zoho one. I am trying to get my head around how it all works. I am mostly setup connected to a shopify store, but I do manual sales also For manual invoicing,
Prefilled Date fields auto-changed and then locked when using “Edit as new”
If a document out for signature has date fields (not SignedDate fields) that were pre-filled before sending, and then you use “Edit as new” to create a new version of the same document, the value of those date fields gets automatically changed to today
Is there a way to update all the start and end dates of tasks of a project after a calendar change?
Hi! Here's my situation. I've built a complete project planning. All its tasks have start dates and due dates. After completing the planning, I've realized that the project calendar was not the right one. So I changed the project calendar. I now have
Next Page