Hello Everyone,
We appreciate the engaging discussions during the Ask the Experts 19 session on the Spring Release. It was a pleasure connecting with you. Our team is actively working towards your requests to deliver an improved experience.
In this post, we’re excited to highlight the questions and answers from the sessions, including guidance on configuration setups and tips to optimize efficiency for your business. We’re sharing these discussions to benefit the wider community because together, we can enhance our collective knowledge and continue to deliver exceptional service to our customers.
1. How to optimize Agent Response Time and Agent Performance within Zoho Desk?
To accurately measure Agent Response Time and Agent Performance, set up a Service Level Agreement (SLA) within your Zoho Desk Account and link it to the business hours defined in Zoho Desk.
If your agents work during specific hours, e.g. from 9 AM to 5 PM, ensure you create business hours that match your operational timings and associate these hours with your SLA.
This will ensure that response and resolution times are calculated based on your defined business hours. If business hours are not associated with the SLA, response and resolution times will default to calendar hours(24 hours format).
2. How can AWS Infra be configured with Zoho Desk?
Currently, we don't offer a direct integration with AWS Infra. However, you can utilize Zoho Desk APIs to integrate with AWS Infra, enabling you to perform API calls from your system to Zoho Desk.
3. When a ticket is closed and the customer responds, the ticket status does not change automatically. However, when we manually reopen the ticket, the SLA exceeds the defined time. How to configure the SLA so that it does not trigger again upon reopening?
In this case, you can enable the "Customer reply" option within the SLA configuration. This ensures that when a customer replies to a ticket, the SLA is recalculated based on your defined settings.
If the ticket status does not automatically change when a customer responds, check if the "Fall back to default" option is enabled for Closed status under the Ticket Status configuration. You can find this setting by navigating to Setup > Customization > Layouts and Fields > Ticket Status. This will ensure that whenever a customer replies to a ticket in the Closed status, the ticket automatically reverts to the default status.
4. How to prevent unnecessary emails from being converted into tickets and ensure only designated contacts can create tickets via email?
Utilize the filter option available in the forwarding mailbox. Alternatively, a workflow can be implemented to automatically close tickets originating from unwanted email addresses or domains.
5. How can we integrate the automated customer happiness survey process so that it associates directly with the relevant contact and their respective ticket? How to track these responses within reports?
Go to Setup (S) >> Organization >> Customer Happiness. Enter your rating question and select either "To every outgoing Ticket response" or "When a Ticket is closed" from the Add Rating link. Adjust the settings according to your requirements. When a customer rates a ticket, the rating will be available within the ticket as well as the Contact info box in the Tickets properties. To view reports, access the Customer Happiness Dashboard by navigating to Analytics -> Dashboard -> Customer Happiness Dashboard.
6. How to resolve the error encountered when sending marketing messages through WhatsApp templates? Is there any alternative solution we can implement for this?
We are currently exploring possible options with Meta. Specifically, we are checking if it's feasible to send marketing template messages for multiple tickets or contacts at a time without encountering errors.
7. Is it possible to configure a GC flow for Line channel?
This Spring release unfolds for you to create a GC flow specifically for the Line channel and deploy it.Refer this link for details.
8. What is the best method to generate weekly reports such as "Average closure time," "Average number of replies per thread," and especially "Most common types of categorized emails" to get an overview of Agent performances in Zoho Desk?
You can use our default reports to track metrics like average resolution time or average response time or schedule custom reports based on your requirements.
If you're using the Enterprise edition of Zoho Desk, you can set up a report scheduler to send the generated reports to different recipients on a weekly or monthly basis. These scheduled reports can be emailed directly to you, allowing you to view them from your email or device without needing to log into your Zoho Desk account each time.
9. What is the best way to trigger a workflow rule after a specific elapsed time? For example, trigger a workflow after a ticket has been closed for 48 hours.
A workflow is an automation triggered by specific events, such as ticket creation, ticket updates, customer replies, or agent responses. In your scenario, you want an automation to trigger specifically 48 hours after a ticket has been closed.
To trigger automation based on elapsed hours, you should use a supervisor Rules (time-based action), which runs periodically (every hour), checks tickets based on the criteria you configure, and executes the associated actions accordingly.
To set this up, navigate to Automation → Supervisor Rules. Create a rule with criteria such as "Hours since status updated is greater than 48" or "equal to 48," along with an additional criterion like "Status is Closed." The rule will then only apply to tickets that have been closed for at least 48 hours since the last status update.
You can associate specific actions with this rule, such as updating the ticket status or sending a follow-up email to the customer, depending on your requirements.
10. If we use Zoho Desk openAPIs with AWS infra, are the APIs HIPAA compliant?
Yes. Since Zoho Desk is HIPAA compliant, the APIs provided by Zoho Desk are also HIPAA compliant. The data stored within Zoho Desk is already encrypted, ensuring that any API accessing this data remains compliant with HIPAA regulations.
However, If you plan to fetch Zoho Desk data stored in AWS infra using other third-party APIs, please verify those APIs and AWS infrastructure are HIPAA compliant.
11. Can we enable the Analytics module to generate reports for data spanning more than 12 months (or years)?
Currently, we are working on enabling report generation for data exceeding 12 months, and this feature should be available soon. This capability is now available in beta, allowing you to create custom reports with approximately 2 years of data. To enable this beta feature for your organization, please send an email to support@zohodesk.com.
12. Can we manually edit the translations used in the Help Center portal?
Zoho Desk supports multilingual setup. In this configuration, you can export a list of fields and their picklist values from Zoho Desk, then manually adjust the translations into your desired language, and then import them back into Zoho Desk. This will update the translations displayed to both your agents and customers within your Help Center and Desk interface.
If you continue to experience difficulties with the translations, please connect with us.
13. A significant issue I'm facing is that 'out of office' emails are reaching the ticketing system and automatically changing the status from 'on-hold' back to 'open.' Is there a straightforward solution to prevent this?
By default, when a customer replies to a ticket, the ticket status reverts automatically to the default "open" status. With a custom function, we can examine the subject or email, detect "out of office" emails, and ensure the ticket retains its original status instead of reopening.
Note: Custom Functions work in the Enterprise edition.
14. How can we configure an automated parallel or sequential approval process in Zoho Desk, similar to the one available in Zoho CRM?
Blueprints provide a viable solution for managing approvals. We are actively working on enhancing this feature to provide an advanced approval process similar to the one available in Zoho CRM.
15. Is it possible to lock ticket records in Zoho Desk, similar to Zoho CRM? Can we configure response and resolution SLA alerts separately?
We are currently working on providing an option to lock tickets based on a time set by the Admin. Once a ticket is closed, a locking period can be defined. After this locking period expires, the ticket will be fully locked. Any further incoming emails or conversations related to that ticket will automatically generate a follow-up ticket. You can then configure separate resolution and response escalation using SLA based to your requirements.
16. Is there a way to tell the system to send an email to the customer (email ticket), when creating a ticket on behalf of a customer?
Yes, there is an option called "Send As Email" available. You can enable this feature by navigating to Settings > Setup > Customization > Central Settings > Tickets. Once enabled, when you create a ticket, you can add the relevant content in the description, and the system will automatically send an email to the customer when you click "Send as Email" option instead of "Submit" upon ticket creation.
17. How can we add notes to a ticket that are visible at the ticket list level? We don't use tasks because they don't notify agents if the ticket is already closed.
To display notes at the ticket list level, one option is to use a custom multi-line field named "Note," where users can enter any relevant notes directly into the ticket. However, custom fields added to tickets are not visible in the standard ticket list view. To display them, use the "Tickets Table view", which supports showing custom fields, including the multi-line fields like "Note" at the list level. Additionally, custom fields can be used for searching and other functionalities, and these custom field will not visible to your customer.
18. During the ticket approval process, how to include comments explaining why an approval was rejected or approved?
You can utilize blueprints to manage approvals effectively. For instance, you can set up separate transitions for approval and rejection, each containing multiple steps such as adding comments, notes, updating fields, and more. Also, approval transitions within blueprint workflows support widgets. This means you can define specific steps or actions to occur whenever an approval or rejection takes place.
19. Do we have the option to create a task for another department directly, or can we only share an existing task from one department to another? How does inter-departmental task coordination work?
If you're referring to tasks in the Activities module (not tickets):
- You can directly create a task for another department only if you have the required permissions for that department.
- Task sharing between departments is not supported unlike tickets, which can be shared.
- If your profile has access to multiple departments or an "All Departments" view, you'll be able to select the department while creating a task.
- Note: Tasks and tickets are department-specific and cannot be linked across departments.
20. Is there a way to make an entity field mandatory when creating tickets?
If you are referring to custom fields or other fields available in the layout during entity creation, you can set these fields as mandatory within the layout settings. To do this, navigate to the layout section, select the field properties, and enable the option labeled "This field is mandatory." Once enabled, the field will become mandatory both during record creation and when editing existing records.
21. Can telephony integrations with Zoho Desk automatically create tickets for answered calls?
Typically, telephony integrations with Zoho Desk only support automatic ticket creation for missed calls. To automatically create tickets for answered calls, you can implement a Custom Function Workflow.
22. How can I enable the parent-child ticketing feature in Zoho Desk?
To enable the parent-child ticketing feature, please raise a request through this form, and we will enable it for you.
23. Is there a way to update a picklist value from A to B in tickets layout?
Within the layouts for picklist fields, there is an option called "Replace Values." When you use this option, the system will replace the old value with the new value you specify and automatically update all previous records accordingly.
24. What is a Lifecycle report, and how is it different from the History tab?
The Lifecycle report allows you to categorize and filter specific events related to status updates, department changes, event owners, and time frames.
In contrast, the History tab provides complete details of all events and entries related to a ticket.
The History tab shows every action taken on a ticket, while the Lifecycle report focuses specifically on selected events, providing a more targeted view.
25. Where can I find the "Ticket and Thread Summary" feature in Desk?
We recently updated the UX/UI for ticket summaries. Now, when you open any ticket in the detailed view, you'll see a button called "Zia Summary" at the top. Clicking this button to generate a summary of the entire ticket, including the subject, incoming and outgoing conversations, private comments, and public comments.
26. Can I customize the Zia summary to display specific information?
Yes, you can customize the Zia summary. For example, you can choose to summarize only incoming messages to understand the user's query, or only private comments to review internal discussions. You can select these options within the Zia summary feature.
27. How can I summarize individual threads within a ticket?
To summarize individual incoming or outgoing threads, click on the "More" icon next to the thread. Under the AI section, you'll find the "Summarize" option, which allows you to generate a thread summary. Refer here for details.
28. Is the Table view for tickets available for "All Departments"?
Currently, the Table view support for tickets across all departments is under implementation and not yet available.
29. What is Multilingual Support in the Customer Happiness rating feature?
Multilingual Support is a feature that allows you to present customer happiness rating forms in multiple languages. Previously, these forms were available only in English. With Multilingual Support, you can offer customer happiness surveys in the customer's preferred language, improving the accuracy and quality of the feedback you receive. Currently, we support more than 27 languages.
30. How can I configure translations for the customer happiness rating questions and choices?
You can configure translations for each question and choice under the Languages-Multilingual from Setup > Customization > Languages. Translate the questions and choices, and these translations will be displayed to customers based on their language preferences.
31. How does the system determine which language to display to the customer?
If the customer is a registered end-user in the help center, the system automatically detects and uses the language based on the user's preferences. If the customer is not registered, the system will use the language specified in the language field of the ticket to determine which language to display.
32. What is the Blueprint feature, and how does it work?
Blueprint is a feature designed to streamline and enforce specific processes that agents must follow when handling tickets. It ensures consistency and adherence to defined workflows.
For example, if you run an e-commerce store and want your agents to follow a specific process before changing a ticket status (such as from "open" to "on hold," or "on hold" to "refund initiated"), you can use Blueprint to define the required steps. This might include actions such as sending a reply to the customer, adding proper comments, or updating specific fields before allowing the status change.
33. What are the benefits of implementing Blueprint in ticket handling?
Implementing Blueprint helps ensure that agents follow a consistent, structured process when managing tickets. It enforces required actions and transitions, improving overall efficiency, accuracy, and quality of customer service.
34. When an Agent creates a ticket in one department and the ticket is moved to another department, the original creator loses visibility of that ticket because they don't belong to the receiving department. The ticket only becomes visible only if the ticket is shared to the creator's department again. Using the help center as an alternative is inconvenient because users must access a separate portal and cannot view internal notes. How can you address this?
Currently, Zoho Desk operates with department-specific categorization for both agents and tickets. If an agent (Agent A) has access only to Department A, they can only view tickets within Department A. Once a ticket created by Agent A is moved to Department B, Agent A loses visibility unless the ticket is explicitly shared back with their original department. Allowing agents to view tickets from departments they don't belong would cause conflict with the core concept of department-specific categorization, data privacy, and sharing policies. So, an agent can only access tickets within departments they have explicit access to, even if they created the ticket.
35. Have you encountered an issue where, when two department emails are mentioned in the 'To' address, a ticket is created in only one department instead of both? We have a mail service provider that auto-forwards emails individually to Desk support emails. After disabling the merge function, we noticed duplicate conversations appearing in the same department rather than separate tickets in two different departments. Why is this happening?
To identify why tickets aren't created in both departments when two department emails are included in the 'To' address, we need to analyze the email headers or the delivery method used by your mail service provider. This analysis will help us understand why the ticket is created in only one department and why both conversations appear in the same ticket. Please send us a sample email that should have created tickets in both departments to support@zohodesk.com. We will analyze it and provide you with a possible solution or pinpoint exactly where the issue lies.
36. How to send one email to multiple departments from Zoho Desk?
Currently, Zoho Desk does not support sending a single outgoing email directly to multiple departments. However, you can consider alternative methods:
- Use the CC field to include multiple recipients.
- Set up workflow automation to notify multiple email addresses using the recent thread content placeholder.
37. When reviewing analytics reports on resolution time, how is the time calculated for tickets in 'On Hold' status?
When generating a report based on resolution time, the resolution time calculates both open and on-hold time. However, if you generate reports specifically based on agent performance, the resolution time calculation excludes the on-hold time.
38. Is it possible to allow certain customers to view Analytics dashboards?
To provide access to analytics dashboards for specific customers, there are two possible approaches:
a. Create customized dashboards and embed them in your Help Center using custom widgets. (or)
b. You can add these customers as "light agents," allowing them limited access to preview specific dashboards.
39. Is it possible to include detailed information within the email body of reminder and comment notifications?
You can include detailed information in email notifications by adding placeholders like "Recent Thread" or "Recent Comment" to your email templates. This ensures the actual comment or thread content appears in the email body, rather than just a link.
40. Can we upload video recordings directly into the Knowledge Base?
Yes, you can upload video recordings directly into the Knowledge Base editor using the attachment option. The attachment feature supports files up to 20 MB. Alternatively, you can use cloud storage options to include larger video files.
41. Is there a way to view Zoho Desk tickets within Zoho CRM seamlessly?
Yes, it is possible to view Zoho Desk tickets alongside CRM contacts or accounts by integrating Zoho Desk with Zoho CRM. This integration allows you to access and manage Desk tickets directly within your CRM, creating a seamless experience for your team.
41. How can agents be notified that a customer has open tickets in other departments, even if they don’t have access to those departments?
There is a permission available that allows users to search for tickets across departments. Tickets from other departments can be displayed in a search view, even if the agent does not have direct access to those departments. To notify agents of tickets in other Departments, enable the permission Access Data across Departments.
42. Can we export ticket view results based on applied filters such as agent, timeframe, classification, status, or other criteria?
Zoho Desk supports exporting tickets classified under a custom view. However, filters applied directly within the tickets view are personal and temporary, and exporting these filtered results is on our roadmap.
Here are the recordings from our Ask the Experts 19 sessions:
Recent Topics
Tiktok and Instagram Carousel with Music
Is it possible to add music or sound (can be downloaded or uploaded or attached) when we upload carousels in IG and Tiktok?
[Product Update] Locations module migration in Zoho Books integration with Zoho Analytics
Dear Customers, As Zoho Books are starting to support an advance version of the Branches/Warehouses module called the Locations module, users who choose to migrate to the Locations module in Zoho Books will also be migrated in Zoho Analytics-Zoho Books
Once again, non-admins can no longer revise the site map
Not sure when this change happened, but it's a problem now. This appears to be a regression on this issue: https://help.zoho.com/portal/en/community/topic/bug-non-admins-can-no-longer-revise-the-site-map ... which was solved. That issue was also a regression.
Detail View in Mobile without Labels
Zoho creator 6. I have been trying to acheieve this but not able to. I have a quick view of my articles using custom layout for mobile. When i tap on an article it opens in detail view on my mobile which has two cols. Left displays label and right the
Updating task using excel file
Hi, Is there a way to update existing tasks using excel file import? Thanks
Cross module filtering is now supported in CRM
Editions: All DCs: All Release plan: This enhancement is being released in phases. It is now available in AU, JP, and CN DCs. Help resource: Advanced filters The Cross-module filtering enhancement is now available to all CRM accounts in the following
Before Going To The Qc stage , site ready ness file upload mandtoty how to achive this in the blue print transition
Before Going To The Qc stage , site ready ness file upload mandtoty how to achive this in the blue print transition On click of the Predelivery transition can we show site ready ness file upload mandtoty or on click of the QC show the alert message site
Note cards are duplicating
Hi, I've been using this app for some time and love it. Recently I've noticed that upon closing a note card, it creates a duplicate. If I exit the notebook it's in and go back, everything is back to normal. Not a major issue but still a little annoying.
Where is the (Bulk) Notes Export function from Notebook ???????
I have seen various threads over the last two years on this and basically no action from ZOHO at all ! BTW having to go to an individual note and export to PDF (which now doesn't even work ) or some sort of zoho format is by no means the answer ! I still can't see any sort of bulk (or even individual) export function across notes. This is really poor for a notes product that is nearly 4 years old from a "major vendor". I now have a large number of notes (some with images) that I want to export and
Again about the backlighting of the search query when searching in a client for Linux
Some time passed, I installed a client for Linux version 3.4.0, but I still did not receive the promised search with the backlighting of the search query how it was implemented in the client for android. In the previous topic, you told me that this function
Important! ZipRecruiter Sponsored Posting Plan Changes in Zoho Recruit
Greetings, We’re reaching out to inform you about an important upcoming change to the ZipRecruiter Sponsored job board integration within Zoho Recruit. What’s Changing? Starting June 1, 2025, Zoho Recruit will be updated with ZipRecruiter's latest pricing
In the Blue Print Transition requirement received it will show 8 check field in pop up if they any one of this field then only move to next stage Ist quote
In the Blue Print Transition requirement received it will show 8 check field in pop up if they any one of this field then only move to next stage Ist quote Pls help how i fix this
Linking Multi-UOM Barcodes to Products in Zoho Books
Greetings, I'm using Zoho Books for retail shop and I'm running into a bit of a challenge with products that have multiple Units of Measurement (UOMs) and corresponding barcodes. For example, I sell cigarettes both as individual packets and in cartons
Convert Item to composite item
When using Zoho CRM integrated with Zoho Inventory/Books, the item creation process is a little messy. After a few years of trial and error, we have settled on creating items in CRM, which are sync'ed to Zoho Inventory using Zoho's own internal integration.
Mapping “Account Name” from CRM to Campaigns
I’m syncing our Contacts list to Campaigns and want to select “Account Name” as an available field. Account Name does not appear in the drop down menu for CRM field even though Account Name is a field in our standard layout. How can I make it availa
Zoho Campaigns to Zoho Analytics Sync Fails – Field Mapping Shows But Not Applied
I’m facing a persistent issue with the Zoho Campaigns integration to Zoho Analytics in my workspace. Here’s a detailed description of the problem: Under Edit Setup, I see a field mapping summary that shows: DataField Mapping: Most Recent Login However,
Host in US Data Centre
I humble apply to be registered on US Data centre
Multiple images, one record
I have a form that is used to capture the following info: -Facility Name -Origin -Shipment # -Picture of Damaged Pallet (Image field) I want to be able to capture multiple pictures without having to create a new record, as there might be multiple damaged pallets on the shipment. Obviously, one never knows how many damaged pallets might be on a shipment so I'd prefer not to create 20 image fields and have most of them unused. I'd prefer that they have an option to add another image only if they need
how to dynamically upload multiple images for single record?
Is the use of dynamic multiple images in a single record supported? I've searched but have not found the answer. If it is supported, how is it done? I saw 1 suggestion to add a sub-form but that doesn't seem to be the answer. I don't want to add a set number of image fields. Each record would have a different number of images. I want the addition of images to be dynamic. thanks
Multi-upload field
Hi I need to include a file upload field that allows the user to select multiple files and upload all at once. I hope I can do this with HTML, I'm new to merging HTML and deluge... Can I trigger a hidden file upload window to appear On User Input of a field in an embedded form? Thanks! Levi
is it possible to add multiple attachments to a record?
Hello, I'm trying to add functionality so that a record can have several associated attachments. I obviously added a File Upload field to my form, but that appears to only allow one total. Is there a way around this? Thanks, - Kevin
multiple upload files in zoho form
Hi, I need upload multiple files in a single upload field thkns
Keeping Track of Email Threads
Hi, Z CRM is great for tracking all the activities one would want to track whilst qualifying leads, converting to customers, closing deals etc etc, however.... ....although I can use Z CRM to send an email to a lead/contact and have that recorded as an activity for other team members to see, there is no way of capturing an inbound email from that lead. Assume my lead replies to my email sent from ZCRM, in my case, the response arrives in my ZMail account. However I can't get it back into ZCRM to
Zoho Creator invokeUrl to retreive PDF
I'm trying to retreive a record PDF to send to Print Node. Tried with and without the zoho_creator_connection. pdf_content = invokeurl [ url :"https://creatorapp.zoho.com.au/<org_namespace>/<app_link_name>/record-pdf/<report_link_name>/" + input.ID type
Bulk upload image option in Zoho Commerce
I dont know if I am not looking into it properly but is there no option to bulk upload images along with the products? Like after you upload the products, I will have to upload images one by one again? Can someone help me out here? And what should I enter
Zoho App Builder
I’m looking for a Zoho Creator developer to build a simple app for tracking site expenses for a construction company. Key features: mobile form, dropdowns for projects and expense types, photo attachment for invoices, auto-calculated totals, and Excel
Captcha can't be enabled conditionally
Hi Problem: captcha on a form can't be enabled conditionally. Why is this a problem: Because I use the same form on our website (public) in the portal and mobile app. In the portal it works but in the mobile app it doesn't. So there should be a way to
ACH Returns Don’t Trigger Dunning or Reverse Payment in Zoho Subscriptions
Zoho Billing marked an ACH payment as successful and kept the subscription active — even though the payment was later returned by the bank (NSF). There was no update to the invoice or subscription status, and I had to manually clean it all up. For credit
Zoho Sheet - Split cell diagonally fill half color
is it possible to split a cell diagonally, fill different text in each half and ideally color them differently as well?
Calling Token API in Postman returning "error: invalid_client"
Hello, I've been working on setting up an API to get data from zoho crm into a third-party application. I'm currently testing the setup in Postman, but I'm getting an error from the API to retrieve the access token. It keeps returning "error: invalid_client".
How to handle this process need using a Blueprint?
See one minute screen recording: https://workdrive.zohoexternal.com/external/eb743d2f4cde414c715224fc557aaefeb84f12268f7f3859a7de821bcc4fbe15
bulk scheduling youtube shorts and facebook reels
how do i flag the video as facebook reel rather than normal video, it's vertical, 20 seconds, yet still being posted as video on facebook for youtube, it's being rejected out right both videos are to standard, can be posted normally with normal scheduler
Invitation-Based User Access in Zoho Analytics
Hello everyone, We’re rolling out an important update on how users are added to your Zoho Analytics Organization and Workspaces. Previously, when admins added users, they were automatically added to the organization. Moving forward, to improve security
Filtert products by multi select custom field
Hello, this is seems like a must addition, why it can not be done now?
Multiple images
Hi Is there a way to insert multiple images in one image record or any way that instead of one image, I could upload 5 to 10 images together. Looking forward for a solution. Regards
Zoho Projects - Custom Objects
Hello, is there the ability now, or in the near future, to add custom objects to Zoho Projects? The requirement here would be to have the ability to track change requests to a project's budget. The idea here is to have the ability to create a custom Object
Access CRM Variables from Formula field
Is it possible to use a CRM variable (defined in Developer Space -> CRM Variables) in a formula field for calculations ?
Announcing Bigin India Meetups Across 8 Cities: July 29 - Aug 07
Hello Biginners, We've got some exciting news to share! We're hosting our first round of Customer Meetups for 2025 in India, from 29th July - 9th August. Whether you're a Bigin newbie or a seasoned pro, this is your chance to meet customers from your
Why isn't there an Expense description field / column?
Hello! I'm new to Zoho Books and accounting. I'm surprised there isn't a proper expense description field (and column in the overview "all expenses" page)? I thought this was a given in accounting, as visualizing expenses facilitates tracking them down?
New in Zoho PDF Editor: Watermarks, password protection, signature collection, and more.
Hi Zoho Sign users! We are delighted to introduce the latest enhancements to Zoho PDF Editor, designed based on user feedback and feature requests. This update enables you to reorder, extract, and rotate PDF pages, add watermarks, and collect signatures.
Next Page