Feature Request: Ability to set Default Custom Filters and apply them via URL/Deluge

Feature Request: Ability to set Default Custom Filters and apply them via URL/Deluge

I've discovered a significant gap in how Zoho Creator handles Custom Filters for reports, and I'm hoping the Zoho team can address this in a future update. This limitation has been raised before and continues to be requested, but remains unresolved.

The Issue
According to the official documentation, Custom Filters allow developers to create predefined filter combinations that users can select from a dropdown menu. This is a powerful feature for simplifying complex filtering scenarios for end users.
However, there is no way to set a default Custom Filter that automatically applies when a report loads, nor can Custom Filters be applied via URL parameters or Deluge scripts.
Example Use Case
Consider a simple Clients Report with Custom Filters for "Active Clients" and "Inactive Clients".
Desired behavior:
  • Report loads with "Active Clients" filter pre-applied by default
  • Users can remove the filter to see all clients
  • Users can switch to "Inactive Clients" filter when needed
Current reality: The report always loads unfiltered, showing ALL clients. Users must manually select the "Active Clients" filter every single time they access the report—there's no way to set it as the default.
The Problem
Zoho Creator provides excellent support for field-based filtering via functionality-based URLs—including operators like EQUALS, CONTAINS, BETWEEN, date ranges, and more. However, Custom Filters exist in complete isolation from all programmatic control.
Capability Field-Based URL Filtering Custom Filters
User can manually apply ✓ Yes ✓ Yes
Apply via URL parameter ✓ Yes
?FieldName=value
✗ No
Use operators (CONTAINS, BETWEEN, etc.) ✓ Yes
&FieldName_op=26
✗ N/A
Set as default on report load ✓ Yes (Report Criteria) ✗ No
Apply via openUrl in Deluge ✓ Yes ✗ No
Pre-select on embedded reports ✓ Yes ✗ No
"Hard" vs. "Soft" Filtering — The UX Problem
This limitation creates a fundamental UX trade-off that developers shouldn't have to make:
Approach Behavior User Experience
Report Criteria
(Hard Filter)
Permanently applied. Cannot be removed or changed by the user. Users are locked in. They cannot explore beyond the predefined criteria.
Custom Filter
(Soft Filter)
User-selectable. Can be applied, changed, or removed at will. Users start with a focused view but can remove it to see the bigger picture.
The problem: We are forced to use "Hard Filters" (Report Criteria) when the use case actually requires "Soft Filters" (a sensible default that users can adjust). This hurts the end-user's ability to explore data.
The "AND Logic Trap" with Pages:
Report Criteria is global—it persists everywhere: direct browser access, mobile app, embedded in Pages, and exports. When embedding a report in a Page, any criteria added via the Page Builder uses AND logic with the existing Report Criteria:
Report Criteria: Status == "Active"
Page Embed Criteria: City == "New York"
Result: Status == "Active" AND City == "New York"
You cannot "subtract" or override Report Criteria. If your "Clients Report" has hard-coded criteria showing only "Active" clients, you cannot embed that same report on an "Archived Clients" page. This forces you to clone the report entirely.
Custom Filters are designed to solve this—allowing a single report to adapt to different contexts. But without the ability to set a default Custom Filter via URL or Page embed, this flexibility is completely inaccessible.
The Current Workarounds (All Suboptimal)
To achieve "default filter" behavior, developers are forced into one of these suboptimal approaches:
Workaround 1: Report Cloning ("Report Bloat")
Many users simply duplicate the "Clients Report," rename it "Active Clients Report," and set hard-coded criteria. This leads to:
  • Application bloat with multiple near-identical reports
  • Violates the DRY (Don't Repeat Yourself) principle
  • Maintenance nightmare—changes must be applied to every clone
  • Confusing for users who see multiple similar reports in navigation
Workaround 2: URL Parameter Construction
Abandon Custom Filters entirely and replicate the filter logic using URL parameters:
// Instead of simply setting "Active Clients" as the default Custom Filter,
// developers must construct URL parameters manually:

base_url = "https://creatorapp.zoho.com/myaccount/crm-app/#Report:Clients_Report";

// Replicate the Custom Filter logic with field-based parameters
filter_params = "?Status=Active&Status_op=18"; // 18 = EQUALS operator

openUrl(base_url + filter_params, "same window");
Additional friction: Finding the correct Operator ID (e.g., 18 for EQUALS, 26 for CONTAINS, 58 for BETWEEN) requires digging through documentation. Custom Filters abstract this complexity away—losing them forces developers to deal with these obscure codes.
Problems with both approaches:
  • Complex filter logic must be duplicated—once in the Custom Filter definition (for manual use) and again in Deluge scripts (for automation)
  • No single source of truth for filter criteria
  • Maintenance nightmare when filter logic changes—updates required in multiple places
  • Users see raw URL parameters instead of friendly Custom Filter names
  • Custom Filters with complex multi-field criteria become extremely verbose URL strings
What Should Happen Instead
Proposed Solution 1: Default Custom Filter Setting
Add a simple option in Report Properties to designate one Custom Filter as the default:
Report Properties → Custom Filters → [Filter Name] → ☑ Set as Default
When enabled, this filter would automatically apply when the report loads, while still allowing users to switch to other Custom Filters or clear it entirely.
Proposed Solution 2: URL Parameter Support
Allow Custom Filters to be specified via URL parameter, consistent with existing functionality-based URL patterns:
https://creatorapp.zoho.com/myaccount/crm-app/#Report:Clients_Report?zc_CustomFilter=Active_Clients
This would enable developers to programmatically direct users to reports with the appropriate Custom Filter pre-applied, using a single clean parameter instead of replicating complex field-based criteria.
Proposed Solution 3: Deluge Integration
Support Custom Filter names in openUrl calls:
// Clean, maintainable approach
openUrl("#Report:Clients_Report?zc_CustomFilter=Active_Clients", "same window");

// Instead of duplicating all the filter logic
openUrl("#Report:Clients_Report?Status=Active&Status_op=18", "same window");
Real-World Impact
This limitation affects any workflow requiring:
  • Default filtered views — A Clients report should show "Active Clients" by default, not all clients
  • Dashboard navigation — Clicking a KPI tile should open a report with the relevant Custom Filter applied
  • Email links to filtered reports — "Click here to see overdue invoices" should pre-apply the appropriate filter
  • Embedded reports in Pages — Different page contexts should show different default filter states without cloning reports
  • Mobile experience — On mobile apps, filters are hidden behind menus. Users often miss them entirely. A default Custom Filter ensures users see relevant data immediately without navigating through menus on a small screen
  • User onboarding — New users should see a sensible default view, not unfiltered data overwhelming them

Developer Impact: Custom Filters are excellent for end-user experience but nearly useless for automation and programmatic control. This gap forces developers to maintain duplicate filter logic—once in Custom Filters for manual use, and again as URL parameters for automation.

Request to Zoho Team

Can this be addressed in a future update?

The current implementation forces developers to choose between:

1. User-Friendly Custom Filters
Easy for users to understand and apply manually, but no programmatic control or default state
2. URL Parameter Filtering
Full programmatic control via ?FieldName=value&FieldName_op=constant, but complex to maintain and requires duplicating filter logic

We shouldn't have to choose—Custom Filters should support both user interaction AND programmatic control.

Community Input Requested: Has anyone else encountered this limitation or found a workaround? I'd love to hear how others are handling scenarios where a default Custom Filter is needed.


    • Recent Topics

    • Automation #7 - Auto-update Email Content to a Ticket

      This is a monthly series where we pick some common use cases that have been either discussed or most asked about in our community and explain how they can be achieved using one of the automation capabilities in Zoho Desk. Email is one of the most commonly
    • Ticket to article and Ticket to template

      Hello! I would like to know if it is possible (and how) to do the following actions: 1. To generate an article from a ticket (reply + original message) 2. Easy convert an answer to an email template
    • Is there API Doc for Zoho Survey?

      Hi everyone, Is there API doc for Zoho Survey? Currently evaluating a solution - use case to automate survey administration especially for internal use. But after a brief search, I couldn't find API doc for this. So I thought I should ask here. Than
    • Kaizen #225 - Making Query-based Custom Related Lists Actionable with Lookups and Links

      Hello everyone! Welcome back to another post in the Kaizen series! This week, we will discuss an exciting enhancement in Queries in Zoho CRM. In Kaizen #190, we discussed how Queries bridge gaps where native related lists fall short and power custom related
    • WebDAV / FTP / SFTP protocols for syncing

      I believe the Zoho for Desktop app is built using a proprietary protocol. For the growing number of people using services such as odrive to sync multiple accounts from various providers (Google, Dropbox, Box, OneDrive, etc.) it would be really helpful
    • Change the "from" field

      Hello, I used some random word to create the account ID to later host the domain based emails. That username shows up in the "from" field on test emails. How do I change that to a custom one, like first name/last name or business name? I tried to create second user and "named" it the way I want and it worked to a degree, although the "from" field shows all lower case letters, while original had some capital letters. So the "all-low-case" is another issue I am having... Thank you
    • [Free Webinar] Learning Table Series - AI-Enhanced Logistics Management in Zoho Creator

      Hello Everyone! We’re excited to invite you to another edition of Learning Table Series, where we showcase how Zoho Creator empowers industries with innovative and automated solutions. About Learning Table Series Learning Table Series is a free, 45-60
    • How to use Rollup Summary in a Formula Field?

      I created a Rollup Summary (Decimal) field in my module, and it shows values correctly. When I try to reference it in a Formula Field (e.g. ${Deals.Partners_Requested} - ${Deals.Partners_Paid}), I get the error that the field can’t be found. Is it possible
    • Zoho Creator to Zoho CRM Images

      Right now, I am trying to setup a Notes form within Zoho Creator. This Notes will note the Note section under Accounts > Selected Account. Right now, I use Zoho Flow to push the notes and it works just fine, with text only. Images do not get sent (there
    • Error Logs / Failure logs for Client Scripts Functions

      Hi Team, While we are implementing client scripts for the automation, it is working fine in few accounts but not working for others. So, it would be great if we can have error Logs for client scripts also just like custom functions. Is there any way that
    • Zoho Books blocks invoicing without VeriFactu even though it is not mandatory until 2027

      I would like to highlight a very serious issue in Zoho Books for Spain. 1. The Spanish government has postponed the mandatory start of VeriFactu to January 1st, 2027. This means that during all of 2026 businesses are NOT required to transmit invoices
    • Problem : Auto redirect from zoho flow to zoho creator

      Hi there, I've been waiting for zoho team to get back on this for last couple of days. Anyone else have the problem to access zoho flow? everytime I click on zoho flow it redirects me to zoho creator. I tried incognito mode but it still direct me to zoho
    • Why am I seeing deleted records in Zoho Analytics syncing with Zoho CRM?

      I have done a data sync between Zoho CRM and Zoho Analytics, and the recycle bin is empty. Why do I see deleted leads/deals/contacts in Zoho Analytics if it doesn't exist in Zoho CRM? How can I solve this problem? Thanks
    • Peppol: Accept Bill (Belgium)

      Hi, This topic might help you if you're facing the same in Belgium. We are facing an issue while accepting a supplier bill received by Peppol in Zoho Books. There is a popup with an error message: This bill acceptance could not be completed, so it was
    • Zoho Books is now integrated with Zoho Checkout

      Hello everyone,   We're glad to be announcing that Zoho Books is now integrated with Zoho Checkout. With this integration, you can now handle taxes and accounting on your payment pages with ease.   An organization you create in Zoho Checkout can be added to Zoho Books and vice-versa. Some of the key features and benefits you will receive are:   Seamless sync of customer and invoice data With the end-to-end integration, the customer and invoice details recorded via the payment pages from Zoho Checkout
    • Sync Issue

      My Current plan only allows me with 10,000 rows and it is getting sync failure how to control it without upgrading my plan
    • Add Zoho PDF to Zoho One Tool Applications

      It should be easy to add from here without the hassle of creating a web tab:
    • JOB WISE INVOICE PROCESS

      I WANT TO ENABLE JOB WISE TRACKING OF ALL SALES AND PURCHASE
    • PDF Template have QTY as first column

      I want to have the QTY of an item on the sales orders and invoices to be the first column, then description, then pricing. Is there a way to change the order? I went to the Items tab in settings but don't see how to change the order of the columns on
    • RAG (Retrieval Augmented Generation) Type Q+A Environment with Zoho Learn

      Hi All, Given the ability of Zoho Learn to function as a knowledge base / document repository type solution and given the rapid advancements that Zoho is making with Zia LLM, agentic capabilities etc. (not to mention the rapid progress in the broader
    • In App Auto Refresh/Update Features

      Hi,    I am trying to use Zoho Creator for Restaurant management. While using the android apps, I reliased the apps would not auto refresh if there is new entries i.e new kitchen order ticket (KOT) from other users.   The apps does received notification but would not auto refresh, users required to refresh the apps manually in order to see the new KOT in the apps.    I am wondering why this features is not implemented? Or is this feature being considered to be implemented in the future? With the
    • IMAP mail after specify date

      Hi My customer's mail server is on premise and mail storage is very huge. So It never finish sync. and finally stop sync. Cloud CRM have a option like zoho mail sync mail after some date.
    • Claude + MCP Server + Zoho CRM Integration – AI-Powered Sales Automation

      Hello Zoho Community 👋 I’m excited to share a recent integration we’ve worked on at OfficehubTech: ✅ Claude + MCP Server + Zoho CRM This integration connects Zoho CRM with Claude AI through our custom MCP Server, enabling intelligent AI-driven responses
    • Search Bar positioning

      Why is the Search bar on the far right when everything is oriented towards the left?
    • Import Error: Empty values for mandatory fields - Closing Date

      Hello, I've tried multiple times to import a CVS Potential list from another Zoho account. But the error message I get is: Empty values for mandatory fields - Closing Date There are valid dates in this field, so I don't understand why this error messages
    • Feature Requests - Contact Coloured Picklist Visibility & Field Visibility During Ticket Creation

      Hi Desk Team, I have 2 feature requests for you. Since Coloured Picklists are now available in Desk, It would be great if the colours were visible on the Related Details (Contact Information) when creating a ticket. In the screenshot below, I have 2 fields
    • Accounts Receivable Balances Differs in Balance Sheet, Customer Balance Report, AR Ageing Summary, and AR Ageing Details.

      Hello Zoho Accounts Receivable Balances Differs in Balance Sheet, Customer Balance Report, AR Ageing Summary, and AR Ageing Details. Please clarify and fix the issues here. Thanks
    • How to integrate XML with Zoho CRM

      Hi, I have an eCom service provider that gives me a dynamic XML that contains order information, clients, shipments... The XML link is the only thing I have. No Oath or key, No API get... I want to integrate it into Zoho CRM. I am not a developer nor
    • Feature Request - Ability to Customise Contact Info Card on Ticket Details View

      Hi Desk Team, I've added a "Contact Priority" and "Account Prioirty" field and it would be very useful to agents if they could see that information in the Contact Info card on the Ticket Details view. It would be great if we could choose some fields to
    • Tax in Quote

      Each row item in a quote has a tax value. At the total numbers at the bottom, there is also a Tax entry. If you select tax in both of the (line item, and the total), the tax doubles. My assumption is that the Tax total should be totalling the tax from
    • Zoho Flow integration with Facebook Messenger and Whatsapp

      Hi there,  any plans of adding integrations with Facebook Messenger and Whatsapp into Zoho Flow? Seems that more and more business are delivering automated updates such as "your order is received",  "your order has been shipped" and so on via these two platforms. Not sure if Whatsapp has the API access needed i am pretty sure that Facebook Messenger has... Kind regards Bo Thygesen 
    • Campaigns unsubscribe/manage preferences links

      Hi, Where can I edit the unscubscribe and manage preferences link in the footer of the email. I would like it so that when you click 'manage preferences' an form opens up that allows the person to choose what type of emails they do and don't wish to
    • email address somehow still not verified (?!)

      L.S. After creating a new email template in CRM I was about to send a group email to my clients, then Zoho CRM announced that they would change the sender address to some kind of Zoho-e-ddress because my email address "has not been verified". Not only
    • Marketing Tip #17: Add credibility to your online store with Review Widgets

      One of the fastest ways to build trust in an online store is to show real customer feedback right where people are deciding to buy. Third-party widgets let you embed things like Google Reviews, Instagram feeds, or even a WhatsApp chat button. These add
    • adding several team members to an Opportunity

      How can we add several team members to one opportunity for collaboration? I have researched and only found something called Deal Team which I cannot find in my CRM to configure.
    • Bulk update Profile Permissions

      Dears, What should we do if we add new forms or reports and need to update more than 20 permissions? Updating them one by one feels pretty harsh, doesn’t it?
    • Filter in fields from Jira extension

      We have installed the Jira extension so we can maken Jira issues from Zoho desk. In Zoho desk I can also see the Jira issue status for example but I can not filter on this field. I would like to setup an filter showing me the closed Jira issues. How can
    • Zoho Creator customer portal limitation | Zoho One

      I'm asking you all for any feedback as to the logic or reasoning behind drastically limiting portal users when Zoho already meters based on number of records. I'm a single-seat, Zoho One Enterprise license holder. If my portal users are going to add records, wouldn't that increase revenue for Zoho as that is how Creator is monetized? Why limit my customer portal to only THREE external users when more users would equate to more records being entered into the database?!? (See help ticket reply below.)
    • Add Reporting feature to display variance/change columns when comparing periods

      When running reports to compare periods (for example, Profit and Loss comparing current year to previous), I would like to be able to display variance columns in both (a) amount or (b) percentage.
    • Link Contacts to Billed Accounts

      Hello, I want to do a survey on all my customers of 2025. For that I want to select all contacts linked to accounts who where billed in 2025. How to I create this link to I can then use Zoho Survey with this database of contacts?
    • Next Page