Hello Everyone,
We appreciate the engaging discussions during the Ask the Experts 19 session on the Spring Release. It was a pleasure connecting with you. Our team is actively working towards your requests to deliver an improved experience.
In this post, we’re excited to highlight the questions and answers from the sessions, including guidance on configuration setups and tips to optimize efficiency for your business. We’re sharing these discussions to benefit the wider community because together, we can enhance our collective knowledge and continue to deliver exceptional service to our customers.
1. How to optimize Agent Response Time and Agent Performance within Zoho Desk?
To accurately measure Agent Response Time and Agent Performance, set up a Service Level Agreement (SLA) within your Zoho Desk Account and link it to the business hours defined in Zoho Desk.
If your agents work during specific hours, e.g. from 9 AM to 5 PM, ensure you create business hours that match your operational timings and associate these hours with your SLA.
This will ensure that response and resolution times are calculated based on your defined business hours. If business hours are not associated with the SLA, response and resolution times will default to calendar hours(24 hours format).
2. How can AWS Infra be configured with Zoho Desk?
Currently, we don't offer a direct integration with AWS Infra. However, you can utilize Zoho Desk APIs to integrate with AWS Infra, enabling you to perform API calls from your system to Zoho Desk.
3. When a ticket is closed and the customer responds, the ticket status does not change automatically. However, when we manually reopen the ticket, the SLA exceeds the defined time. How to configure the SLA so that it does not trigger again upon reopening?
In this case, you can enable the "Customer reply" option within the SLA configuration. This ensures that when a customer replies to a ticket, the SLA is recalculated based on your defined settings.
If the ticket status does not automatically change when a customer responds, check if the "Fall back to default" option is enabled for Closed status under the Ticket Status configuration. You can find this setting by navigating to Setup > Customization > Layouts and Fields > Ticket Status. This will ensure that whenever a customer replies to a ticket in the Closed status, the ticket automatically reverts to the default status.
4. How to prevent unnecessary emails from being converted into tickets and ensure only designated contacts can create tickets via email?
Utilize the filter option available in the forwarding mailbox. Alternatively, a workflow can be implemented to automatically close tickets originating from unwanted email addresses or domains.
5. How can we integrate the automated customer happiness survey process so that it associates directly with the relevant contact and their respective ticket? How to track these responses within reports?
Go to Setup (S) >> Organization >> Customer Happiness. Enter your rating question and select either "To every outgoing Ticket response" or "When a Ticket is closed" from the Add Rating link. Adjust the settings according to your requirements. When a customer rates a ticket, the rating will be available within the ticket as well as the Contact info box in the Tickets properties. To view reports, access the Customer Happiness Dashboard by navigating to Analytics -> Dashboard -> Customer Happiness Dashboard.
6. How to resolve the error encountered when sending marketing messages through WhatsApp templates? Is there any alternative solution we can implement for this?
We are currently exploring possible options with Meta. Specifically, we are checking if it's feasible to send marketing template messages for multiple tickets or contacts at a time without encountering errors.
7. Is it possible to configure a GC flow for Line channel?
This Spring release unfolds for you to create a GC flow specifically for the Line channel and deploy it.Refer this link for details.
8. What is the best method to generate weekly reports such as "Average closure time," "Average number of replies per thread," and especially "Most common types of categorized emails" to get an overview of Agent performances in Zoho Desk?
You can use our default reports to track metrics like average resolution time or average response time or schedule custom reports based on your requirements.
If you're using the Enterprise edition of Zoho Desk, you can set up a report scheduler to send the generated reports to different recipients on a weekly or monthly basis. These scheduled reports can be emailed directly to you, allowing you to view them from your email or device without needing to log into your Zoho Desk account each time.
9. What is the best way to trigger a workflow rule after a specific elapsed time? For example, trigger a workflow after a ticket has been closed for 48 hours.
A workflow is an automation triggered by specific events, such as ticket creation, ticket updates, customer replies, or agent responses. In your scenario, you want an automation to trigger specifically 48 hours after a ticket has been closed.
To trigger automation based on elapsed hours, you should use a supervisor Rules (time-based action), which runs periodically (every hour), checks tickets based on the criteria you configure, and executes the associated actions accordingly.
To set this up, navigate to Automation → Supervisor Rules. Create a rule with criteria such as "Hours since status updated is greater than 48" or "equal to 48," along with an additional criterion like "Status is Closed." The rule will then only apply to tickets that have been closed for at least 48 hours since the last status update.
You can associate specific actions with this rule, such as updating the ticket status or sending a follow-up email to the customer, depending on your requirements.
10. If we use Zoho Desk openAPIs with AWS infra, are the APIs HIPAA compliant?
Yes. Since Zoho Desk is HIPAA compliant, the APIs provided by Zoho Desk are also HIPAA compliant. The data stored within Zoho Desk is already encrypted, ensuring that any API accessing this data remains compliant with HIPAA regulations.
However, If you plan to fetch Zoho Desk data stored in AWS infra using other third-party APIs, please verify those APIs and AWS infrastructure are HIPAA compliant.
11. Can we enable the Analytics module to generate reports for data spanning more than 12 months (or years)?
Currently, we are working on enabling report generation for data exceeding 12 months, and this feature should be available soon. This capability is now available in beta, allowing you to create custom reports with approximately 2 years of data. To enable this beta feature for your organization, please send an email to support@zohodesk.com.
12. Can we manually edit the translations used in the Help Center portal?
Zoho Desk supports multilingual setup. In this configuration, you can export a list of fields and their picklist values from Zoho Desk, then manually adjust the translations into your desired language, and then import them back into Zoho Desk. This will update the translations displayed to both your agents and customers within your Help Center and Desk interface.
If you continue to experience difficulties with the translations, please connect with us.
13. A significant issue I'm facing is that 'out of office' emails are reaching the ticketing system and automatically changing the status from 'on-hold' back to 'open.' Is there a straightforward solution to prevent this?
By default, when a customer replies to a ticket, the ticket status reverts automatically to the default "open" status. With a custom function, we can examine the subject or email, detect "out of office" emails, and ensure the ticket retains its original status instead of reopening.
Note: Custom Functions work in the Enterprise edition.
14. How can we configure an automated parallel or sequential approval process in Zoho Desk, similar to the one available in Zoho CRM?
Blueprints provide a viable solution for managing approvals. We are actively working on enhancing this feature to provide an advanced approval process similar to the one available in Zoho CRM.
15. Is it possible to lock ticket records in Zoho Desk, similar to Zoho CRM? Can we configure response and resolution SLA alerts separately?
We are currently working on providing an option to lock tickets based on a time set by the Admin. Once a ticket is closed, a locking period can be defined. After this locking period expires, the ticket will be fully locked. Any further incoming emails or conversations related to that ticket will automatically generate a follow-up ticket. You can then configure separate resolution and response escalation using SLA based to your requirements.
16. Is there a way to tell the system to send an email to the customer (email ticket), when creating a ticket on behalf of a customer?
Yes, there is an option called "Send As Email" available. You can enable this feature by navigating to Settings > Setup > Customization > Central Settings > Tickets. Once enabled, when you create a ticket, you can add the relevant content in the description, and the system will automatically send an email to the customer when you click "Send as Email" option instead of "Submit" upon ticket creation.
17. How can we add notes to a ticket that are visible at the ticket list level? We don't use tasks because they don't notify agents if the ticket is already closed.
To display notes at the ticket list level, one option is to use a custom multi-line field named "Note," where users can enter any relevant notes directly into the ticket. However, custom fields added to tickets are not visible in the standard ticket list view. To display them, use the "Tickets Table view", which supports showing custom fields, including the multi-line fields like "Note" at the list level. Additionally, custom fields can be used for searching and other functionalities, and these custom field will not visible to your customer.
18. During the ticket approval process, how to include comments explaining why an approval was rejected or approved?
You can utilize blueprints to manage approvals effectively. For instance, you can set up separate transitions for approval and rejection, each containing multiple steps such as adding comments, notes, updating fields, and more. Also, approval transitions within blueprint workflows support widgets. This means you can define specific steps or actions to occur whenever an approval or rejection takes place.
19. Do we have the option to create a task for another department directly, or can we only share an existing task from one department to another? How does inter-departmental task coordination work?
If you're referring to tasks in the Activities module (not tickets):
- You can directly create a task for another department only if you have the required permissions for that department.
- Task sharing between departments is not supported unlike tickets, which can be shared.
- If your profile has access to multiple departments or an "All Departments" view, you'll be able to select the department while creating a task.
- Note: Tasks and tickets are department-specific and cannot be linked across departments.
20. Is there a way to make an entity field mandatory when creating tickets?
If you are referring to custom fields or other fields available in the layout during entity creation, you can set these fields as mandatory within the layout settings. To do this, navigate to the layout section, select the field properties, and enable the option labeled "This field is mandatory." Once enabled, the field will become mandatory both during record creation and when editing existing records.
21. Can telephony integrations with Zoho Desk automatically create tickets for answered calls?
Typically, telephony integrations with Zoho Desk only support automatic ticket creation for missed calls. To automatically create tickets for answered calls, you can implement a Custom Function Workflow.
22. How can I enable the parent-child ticketing feature in Zoho Desk?
To enable the parent-child ticketing feature, please raise a request through this form, and we will enable it for you.
23. Is there a way to update a picklist value from A to B in tickets layout?
Within the layouts for picklist fields, there is an option called "Replace Values." When you use this option, the system will replace the old value with the new value you specify and automatically update all previous records accordingly.
24. What is a Lifecycle report, and how is it different from the History tab?
The Lifecycle report allows you to categorize and filter specific events related to status updates, department changes, event owners, and time frames.
In contrast, the History tab provides complete details of all events and entries related to a ticket.
The History tab shows every action taken on a ticket, while the Lifecycle report focuses specifically on selected events, providing a more targeted view.
25. Where can I find the "Ticket and Thread Summary" feature in Desk?
We recently updated the UX/UI for ticket summaries. Now, when you open any ticket in the detailed view, you'll see a button called "Zia Summary" at the top. Clicking this button to generate a summary of the entire ticket, including the subject, incoming and outgoing conversations, private comments, and public comments.
26. Can I customize the Zia summary to display specific information?
Yes, you can customize the Zia summary. For example, you can choose to summarize only incoming messages to understand the user's query, or only private comments to review internal discussions. You can select these options within the Zia summary feature.
27. How can I summarize individual threads within a ticket?
To summarize individual incoming or outgoing threads, click on the "More" icon next to the thread. Under the AI section, you'll find the "Summarize" option, which allows you to generate a thread summary. Refer here for details.
28. Is the Table view for tickets available for "All Departments"?
Currently, the Table view support for tickets across all departments is under implementation and not yet available.
29. What is Multilingual Support in the Customer Happiness rating feature?
Multilingual Support is a feature that allows you to present customer happiness rating forms in multiple languages. Previously, these forms were available only in English. With Multilingual Support, you can offer customer happiness surveys in the customer's preferred language, improving the accuracy and quality of the feedback you receive. Currently, we support more than 27 languages.
30. How can I configure translations for the customer happiness rating questions and choices?
You can configure translations for each question and choice under the Languages-Multilingual from Setup > Customization > Languages. Translate the questions and choices, and these translations will be displayed to customers based on their language preferences.
31. How does the system determine which language to display to the customer?
If the customer is a registered end-user in the help center, the system automatically detects and uses the language based on the user's preferences. If the customer is not registered, the system will use the language specified in the language field of the ticket to determine which language to display.
32. What is the Blueprint feature, and how does it work?
Blueprint is a feature designed to streamline and enforce specific processes that agents must follow when handling tickets. It ensures consistency and adherence to defined workflows.
For example, if you run an e-commerce store and want your agents to follow a specific process before changing a ticket status (such as from "open" to "on hold," or "on hold" to "refund initiated"), you can use Blueprint to define the required steps. This might include actions such as sending a reply to the customer, adding proper comments, or updating specific fields before allowing the status change.
33. What are the benefits of implementing Blueprint in ticket handling?
Implementing Blueprint helps ensure that agents follow a consistent, structured process when managing tickets. It enforces required actions and transitions, improving overall efficiency, accuracy, and quality of customer service.
34. When an Agent creates a ticket in one department and the ticket is moved to another department, the original creator loses visibility of that ticket because they don't belong to the receiving department. The ticket only becomes visible only if the ticket is shared to the creator's department again. Using the help center as an alternative is inconvenient because users must access a separate portal and cannot view internal notes. How can you address this?
Currently, Zoho Desk operates with department-specific categorization for both agents and tickets. If an agent (Agent A) has access only to Department A, they can only view tickets within Department A. Once a ticket created by Agent A is moved to Department B, Agent A loses visibility unless the ticket is explicitly shared back with their original department. Allowing agents to view tickets from departments they don't belong would cause conflict with the core concept of department-specific categorization, data privacy, and sharing policies. So, an agent can only access tickets within departments they have explicit access to, even if they created the ticket.
35. Have you encountered an issue where, when two department emails are mentioned in the 'To' address, a ticket is created in only one department instead of both? We have a mail service provider that auto-forwards emails individually to Desk support emails. After disabling the merge function, we noticed duplicate conversations appearing in the same department rather than separate tickets in two different departments. Why is this happening?
To identify why tickets aren't created in both departments when two department emails are included in the 'To' address, we need to analyze the email headers or the delivery method used by your mail service provider. This analysis will help us understand why the ticket is created in only one department and why both conversations appear in the same ticket. Please send us a sample email that should have created tickets in both departments to support@zohodesk.com. We will analyze it and provide you with a possible solution or pinpoint exactly where the issue lies.
36. How to send one email to multiple departments from Zoho Desk?
Currently, Zoho Desk does not support sending a single outgoing email directly to multiple departments. However, you can consider alternative methods:
- Use the CC field to include multiple recipients.
- Set up workflow automation to notify multiple email addresses using the recent thread content placeholder.
37. When reviewing analytics reports on resolution time, how is the time calculated for tickets in 'On Hold' status?
When generating a report based on resolution time, the resolution time calculates both open and on-hold time. However, if you generate reports specifically based on agent performance, the resolution time calculation excludes the on-hold time.
38. Is it possible to allow certain customers to view Analytics dashboards?
To provide access to analytics dashboards for specific customers, there are two possible approaches:
a. Create customized dashboards and embed them in your Help Center using custom widgets. (or)
b. You can add these customers as "light agents," allowing them limited access to preview specific dashboards.
39. Is it possible to include detailed information within the email body of reminder and comment notifications?
You can include detailed information in email notifications by adding placeholders like "Recent Thread" or "Recent Comment" to your email templates. This ensures the actual comment or thread content appears in the email body, rather than just a link.
40. Can we upload video recordings directly into the Knowledge Base?
Yes, you can upload video recordings directly into the Knowledge Base editor using the attachment option. The attachment feature supports files up to 20 MB. Alternatively, you can use cloud storage options to include larger video files.
41. Is there a way to view Zoho Desk tickets within Zoho CRM seamlessly?
Yes, it is possible to view Zoho Desk tickets alongside CRM contacts or accounts by integrating Zoho Desk with Zoho CRM. This integration allows you to access and manage Desk tickets directly within your CRM, creating a seamless experience for your team.
41. How can agents be notified that a customer has open tickets in other departments, even if they don’t have access to those departments?
There is a permission available that allows users to search for tickets across departments. Tickets from other departments can be displayed in a search view, even if the agent does not have direct access to those departments. To notify agents of tickets in other Departments, enable the permission Access Data across Departments.
42. Can we export ticket view results based on applied filters such as agent, timeframe, classification, status, or other criteria?
Zoho Desk supports exporting tickets classified under a custom view. However, filters applied directly within the tickets view are personal and temporary, and exporting these filtered results is on our roadmap.
Here are the recordings from our Ask the Experts 19 sessions:
Recent Topics
Search not working!
I have items in my notebook tagged but when I search for a tag nothing comes up! Any fix for this?
Zoho Analytics Regex Support
When can we expect full regex support in Zoho Analytics SQL such as REGEXP_REPLACE? Sometimes I need to clean the data and using regex functions is the easiest way to achieve this.
Zoho CRM Community Digest - October 2025 | Part 1
Hello Everyone! Here's a quick recap of first two weeks of October! Product Updates: Zoho CRM Android App Update: Surveys, Blueprints, and Smarter Mobile Features! Zoho CRM’s Android app just got a useful upgrade. You can now share records, upload your
Add Custom Field Inside Parts Section
How to Add Custom Field Inside Parts Section in Workorder like Category and Sub- Category
What is New in CRM Functions?
What is New in CRM Functions? Hello everyone! We're delighted to share that Functions in Zoho CRM have had a few upgrades that would happen in phases. Phase 1 An all new built-in editor for better user experience and ease of use. ETA: In a couple of days.
Automate onboarding emails with CRM Workflow and Accounts module
We’re a B2B SaaS company selling to public-sector organisations. Each organisation is stored as an Account in Zoho CRM, and each organisation typically has multiple associated Contacts. Our backend syncs product-usage data (setup status, user activity,
Using a CRM Client Script Button to create a Books Invoice
Hello, I need help handling error messages returned to my client script from a function. The scenario I have setup a client script button which is available from each Deal. This CS executes a crm function, which in turn creates an invoice based on the
Important update: Enhanced security measures for account operations in Zoho Cliq
Greetings from the Zoho Cliq team! We’d like to share an important security update that has an influence on some admin actions such as password reset, MFA reset, and MFA backup code generation. What’s changing? With our latest security enhancements, these
Boosting efficiency through faster ticket rendering
This enhancement will provide faster access for support teams and end-users, significantly boosting productivity for everyone. Get ready for a more efficient and satisfying experience! Immediate benefits Faster ticket rendering reduces wait times and
Read webpage - MSXML2.ServerXMLHTTP
I have the following VBA script, put together from various sources (mainly zoho forum/help/support, so it once worked, I guess): private Sub GetListOfSheets() Dim url As String Dim xmlhttp As Object Dim parameters As String Dim html As String range("B1").value
Sales Receipts Duplicating when I run reports why and how do we rectify this and any other report if this happens
find attached extract of my report
Can I execute two 'functions' when completing a mail merge from CRM?
Hi, I have set up a mail merge from CRM Deals to a template. I want a copy of this to be saved in Workdrive, and then a copy also saved back into the deal record from which the merge occurred. I can do both independent of each other, and managed to get
No Functional Autosave or Manual Save Button
Application : Zoho Notebook So I wanted to try Zoho Notebook(On Ubuntu) as an application, I installed the application and went solving my LeetCode problems visually(Drawing mode), at one point the app just stopped saving anything... Every time I tried
Enterprise subscription support
My organization sells subscription services to enterprise customers, which is a different model from the consumer subscription model that Zoho Billing has been designed to support and I beleve this capability should be added. An enterprise subscription
Issue with Creator's IF logic
Hi, I found the following code produces unexpected results: if(-1.0 < 0.0000000) { info "True"; } else { info "False"; } if(-1.0 < 0.000000) { info "True"; } else { info "False"; } The output returned is: False True However, the
Need option to send Package PDF in shipment email (Shipment PDF is missing Lot info)
Is there any way to automatically attach the Package PDF instead of (or alongside) the Shipment PDF in the notification emails? We really need this feature because the default Shipment PDF creates a blind spot for our customers. It does not display Batch/Lot
zoho creator view is not present in the workspace and blank reports
Hi Support, Users who have "write" permissions keep getting this error for all of our embedded reports all of a sudden. See screen shot below: Meanwhile, my developer permissions account sees a blank screen in view and edit mode as shown in the screenshots
Customize portal email template
Can i fetch only first name of the user in portal email template instead of the below code Hi ${User.FULL_NAME}
Can't we let users decide which options they'd like to add at embed widget?
It seems embed widget DOES NOT offer a feature, where users can choose options upon subscribing plans. What Zoho has instead, is that admins have to manually create plan with options. How come no one in Zoho dev team never raised issue about usability
Reupload and rename from one field to another field (file upload)
Hi Everyone, Sorry, i have question to use invoke url for rename and reupload attachments file to another field. Tested on development mode. Zoho C6. Refer to https://www.zoho.com/creator/help/api/v2/upload-file.html look my error notification. Does anyone
Printing Multi-Page Reports (PDF Export)
Hi, I am moving a report from Google's Looker Studio to Zoho Analytics and trying to reproduce the Looker page by page dashboard editing experience. With Google, what you see is what you get when you print to PDF. But I can't seem to create the same experience
Resume Harvester: New Enhancements for Faster Sourcing
We’re excited to share a set of enhancements to Resume Harvester that make sourcing faster and more flexible. These updates help you cut down on repetitive steps, manage auto searches more efficiently, and review candidate profiles with ease. Why we built
I NEED TO NUMBER TO TEXT NO HERE
=NUMBERTEXT NEEED
Error: View is not present in the workspace
When saving a dashboard, user receives a popup with the following error. "View is not present in the workspace" What does this mean or refer to? There is no further insight given.
Dear Zoho CEO: Business Growth is about how you prioritise!
All of us in business know that when you get your priorities right, your business grows. Zoho CRM and Zoho Books are excellent products, but sadly, Zoho Inventory continues to lag behind. Just this morning, I received yet another one-sided email about
Is there any way to send an Excel received by email to Dataprep?
Every day I receive an email alert with an Excel file that I want to process through a Dataprep pipeline. To do this, I need to: -Save the file to disk -Open the pipeline -Run the pipeline -Update the source -Several clicks to select and open the saved
Bin Locations
Dear all, I am wondering if someone has the ability to develop the bin locations option for zoho inventory (integrated with zoho books) Regards, Ryan
Create and populate a record in an instant: Introducing zero-shot field prompting to Zia's ICR
A couple of months ago, we upgraded our in-house AI image detection and validation tool, Zia Vision, with intelligent character recognition (ICR). By training Zia with sample images, you could create and enrich CRM records with data extracted from standard
How to Prevent Users From Skipping LMS Videos in Zoho People
How to Prevent Users From Skipping LMS Videos in Zoho People Hello Zoho Developers, In this blog, we will quickly look at how you can stop users from skipping or fast-forwarding videos in Zoho People LMS. Zoho People provides a feature called Disable
Sent mail sort by date disappeared
Hello, We used to be able to sort the emails by date in the sent folder, but this feature has recently disappeared. Can we bring it back?
[Integration Edition] Deluge Learning Series – Custom API with Deluge | November 2025
We’re excited to conclude this four-month Integration Edition of the Deluge Learning Series: Session 1 – Integrating Zoho Apps with Deluge Using Built-In Integration Tasks Session 2 – Integrating Zoho Apps with Deluge Using invokeURL and invokeAPI Session
Automate Backups
This is a feature request. Consider adding an auto backup feature. Where when you turn it on, it will auto backup on the 15-day schedule. For additional consideration, allow for the export of module data via API calls. Thank you for your consideration.
Tips for Organizing Workflows and Improving Team Coordination in Zoho
Hi everyone, I’m looking for some general advice on how different teams are organizing their daily work within Zoho’s apps. Our team recently expanded, and we’re trying to streamline how tasks, discussions, and documents are shared so everything stays
Prevent user from viewing all records?
I have a report that is meant to be used by vendors to view only the records that are assigned to them. All the vendor information is stored in a separate application, so I need to call a function to get the current user's ID (not the zoho user ID). The report settings criteria doesn't support using function calls, so instead I'm embedding the report in an html page like this: if (thisapp.Global.CurrentUserIs("Vendor")) { personID = common.getLoggedInPersonID(); query = "Assigned_Vendor.ID="
Series Label in the Legend
My legend reads 'Series 1' and 'Series 2'. From everything I read online, Zoho is supposed to change the data names if it's formatted correctly. I have the proper labels on the top of the columns and the right range selected. I assume it's something in
Zoho Site pages not displaying in iframes
I simply want to show a Zoho Site page inside an iframe on another non Zoho website. When testing this across many browsers, the iframe content simply does not appear. IE reports that the host does not allow their content to be displayed in iframes. Very disappointing. Is there a way around this please? Here is the URL of the page I would like to appear in an iframe. http://ips-properties-to-rent.zohosites.com
Zoho Inventory as connector in Zoho Creator
Hello, It doesn't appear that Zoho Inventory is one of the many built in connectors in Zoho Creator? I see that there are non-Zoho inventory applications that have built in connectors such as Cin7, which leads me to believe that I'm missing something
Send Zoho Forms Link using Zoho CRM Email Templates
I have set up Zoho Forms and CRM integration to pre-populate data from Zoho CRM to Zoho Forms. The setup is working fine. I have also created an email template in the Zoho CRM deals module to send Zoho forms links. So when I send an email using that template
My go to On Load Client Script - Fast, efficient, and works for ALL profiles; Hides everything except initial fields
This is my on Load client script that I use for Create pages. I use a modified version for Edit and Display pages which you can create yourself using the same basic structure that I will give you below. First up, the script. Below that will be an explanation
CRM x WorkDrive: File storage for new CRM signups is now powered by WorkDrive
Availability Editions: All DCs: All Release plan: Released for new signups in all DCs. It will be enabled for existing users in a phased manner in the upcoming months. Help documentation: Documents in Zoho CRM Manage folders in Documents tab Manage files
Next Page