Hello Everyone,
We appreciate the engaging discussions during the Ask the Experts 19 session on the Spring Release. It was a pleasure connecting with you. Our team is actively working towards your requests to deliver an improved experience.
In this post, we’re excited to highlight the questions and answers from the sessions, including guidance on configuration setups and tips to optimize efficiency for your business. We’re sharing these discussions to benefit the wider community because together, we can enhance our collective knowledge and continue to deliver exceptional service to our customers.
1. How to optimize Agent Response Time and Agent Performance within Zoho Desk?
To accurately measure Agent Response Time and Agent Performance, set up a Service Level Agreement (SLA) within your Zoho Desk Account and link it to the business hours defined in Zoho Desk.
If your agents work during specific hours, e.g. from 9 AM to 5 PM, ensure you create business hours that match your operational timings and associate these hours with your SLA.
This will ensure that response and resolution times are calculated based on your defined business hours. If business hours are not associated with the SLA, response and resolution times will default to calendar hours(24 hours format).
2. How can AWS Infra be configured with Zoho Desk?
Currently, we don't offer a direct integration with AWS Infra. However, you can utilize Zoho Desk APIs to integrate with AWS Infra, enabling you to perform API calls from your system to Zoho Desk.
3. When a ticket is closed and the customer responds, the ticket status does not change automatically. However, when we manually reopen the ticket, the SLA exceeds the defined time. How to configure the SLA so that it does not trigger again upon reopening?
In this case, you can enable the "Customer reply" option within the SLA configuration. This ensures that when a customer replies to a ticket, the SLA is recalculated based on your defined settings.
If the ticket status does not automatically change when a customer responds, check if the "Fall back to default" option is enabled for Closed status under the Ticket Status configuration. You can find this setting by navigating to Setup > Customization > Layouts and Fields > Ticket Status. This will ensure that whenever a customer replies to a ticket in the Closed status, the ticket automatically reverts to the default status.
4. How to prevent unnecessary emails from being converted into tickets and ensure only designated contacts can create tickets via email?
Utilize the filter option available in the forwarding mailbox. Alternatively, a workflow can be implemented to automatically close tickets originating from unwanted email addresses or domains.
5. How can we integrate the automated customer happiness survey process so that it associates directly with the relevant contact and their respective ticket? How to track these responses within reports?
Go to Setup (S) >> Organization >> Customer Happiness. Enter your rating question and select either "To every outgoing Ticket response" or "When a Ticket is closed" from the Add Rating link. Adjust the settings according to your requirements. When a customer rates a ticket, the rating will be available within the ticket as well as the Contact info box in the Tickets properties. To view reports, access the Customer Happiness Dashboard by navigating to Analytics -> Dashboard -> Customer Happiness Dashboard.
6. How to resolve the error encountered when sending marketing messages through WhatsApp templates? Is there any alternative solution we can implement for this?
We are currently exploring possible options with Meta. Specifically, we are checking if it's feasible to send marketing template messages for multiple tickets or contacts at a time without encountering errors.
7. Is it possible to configure a GC flow for Line channel?
This Spring release unfolds for you to create a GC flow specifically for the Line channel and deploy it.Refer this link for details.
8. What is the best method to generate weekly reports such as "Average closure time," "Average number of replies per thread," and especially "Most common types of categorized emails" to get an overview of Agent performances in Zoho Desk?
You can use our default reports to track metrics like average resolution time or average response time or schedule custom reports based on your requirements.
If you're using the Enterprise edition of Zoho Desk, you can set up a report scheduler to send the generated reports to different recipients on a weekly or monthly basis. These scheduled reports can be emailed directly to you, allowing you to view them from your email or device without needing to log into your Zoho Desk account each time.
9. What is the best way to trigger a workflow rule after a specific elapsed time? For example, trigger a workflow after a ticket has been closed for 48 hours.
A workflow is an automation triggered by specific events, such as ticket creation, ticket updates, customer replies, or agent responses. In your scenario, you want an automation to trigger specifically 48 hours after a ticket has been closed.
To trigger automation based on elapsed hours, you should use a supervisor Rules (time-based action), which runs periodically (every hour), checks tickets based on the criteria you configure, and executes the associated actions accordingly.
To set this up, navigate to Automation → Supervisor Rules. Create a rule with criteria such as "Hours since status updated is greater than 48" or "equal to 48," along with an additional criterion like "Status is Closed." The rule will then only apply to tickets that have been closed for at least 48 hours since the last status update.
You can associate specific actions with this rule, such as updating the ticket status or sending a follow-up email to the customer, depending on your requirements.
10. If we use Zoho Desk openAPIs with AWS infra, are the APIs HIPAA compliant?
Yes. Since Zoho Desk is HIPAA compliant, the APIs provided by Zoho Desk are also HIPAA compliant. The data stored within Zoho Desk is already encrypted, ensuring that any API accessing this data remains compliant with HIPAA regulations.
However, If you plan to fetch Zoho Desk data stored in AWS infra using other third-party APIs, please verify those APIs and AWS infrastructure are HIPAA compliant.
11. Can we enable the Analytics module to generate reports for data spanning more than 12 months (or years)?
Currently, we are working on enabling report generation for data exceeding 12 months, and this feature should be available soon. This capability is now available in beta, allowing you to create custom reports with approximately 2 years of data. To enable this beta feature for your organization, please send an email to support@zohodesk.com.
12. Can we manually edit the translations used in the Help Center portal?
Zoho Desk supports multilingual setup. In this configuration, you can export a list of fields and their picklist values from Zoho Desk, then manually adjust the translations into your desired language, and then import them back into Zoho Desk. This will update the translations displayed to both your agents and customers within your Help Center and Desk interface.
If you continue to experience difficulties with the translations, please connect with us.
13. A significant issue I'm facing is that 'out of office' emails are reaching the ticketing system and automatically changing the status from 'on-hold' back to 'open.' Is there a straightforward solution to prevent this?
By default, when a customer replies to a ticket, the ticket status reverts automatically to the default "open" status. With a custom function, we can examine the subject or email, detect "out of office" emails, and ensure the ticket retains its original status instead of reopening.
Note: Custom Functions work in the Enterprise edition.
14. How can we configure an automated parallel or sequential approval process in Zoho Desk, similar to the one available in Zoho CRM?
Blueprints provide a viable solution for managing approvals. We are actively working on enhancing this feature to provide an advanced approval process similar to the one available in Zoho CRM.
15. Is it possible to lock ticket records in Zoho Desk, similar to Zoho CRM? Can we configure response and resolution SLA alerts separately?
We are currently working on providing an option to lock tickets based on a time set by the Admin. Once a ticket is closed, a locking period can be defined. After this locking period expires, the ticket will be fully locked. Any further incoming emails or conversations related to that ticket will automatically generate a follow-up ticket. You can then configure separate resolution and response escalation using SLA based to your requirements.
16. Is there a way to tell the system to send an email to the customer (email ticket), when creating a ticket on behalf of a customer?
Yes, there is an option called "Send As Email" available. You can enable this feature by navigating to Settings > Setup > Customization > Central Settings > Tickets. Once enabled, when you create a ticket, you can add the relevant content in the description, and the system will automatically send an email to the customer when you click "Send as Email" option instead of "Submit" upon ticket creation.
17. How can we add notes to a ticket that are visible at the ticket list level? We don't use tasks because they don't notify agents if the ticket is already closed.
To display notes at the ticket list level, one option is to use a custom multi-line field named "Note," where users can enter any relevant notes directly into the ticket. However, custom fields added to tickets are not visible in the standard ticket list view. To display them, use the "Tickets Table view", which supports showing custom fields, including the multi-line fields like "Note" at the list level. Additionally, custom fields can be used for searching and other functionalities, and these custom field will not visible to your customer.
18. During the ticket approval process, how to include comments explaining why an approval was rejected or approved?
You can utilize blueprints to manage approvals effectively. For instance, you can set up separate transitions for approval and rejection, each containing multiple steps such as adding comments, notes, updating fields, and more. Also, approval transitions within blueprint workflows support widgets. This means you can define specific steps or actions to occur whenever an approval or rejection takes place.
19. Do we have the option to create a task for another department directly, or can we only share an existing task from one department to another? How does inter-departmental task coordination work?
If you're referring to tasks in the Activities module (not tickets):
- You can directly create a task for another department only if you have the required permissions for that department.
- Task sharing between departments is not supported unlike tickets, which can be shared.
- If your profile has access to multiple departments or an "All Departments" view, you'll be able to select the department while creating a task.
- Note: Tasks and tickets are department-specific and cannot be linked across departments.
20. Is there a way to make an entity field mandatory when creating tickets?
If you are referring to custom fields or other fields available in the layout during entity creation, you can set these fields as mandatory within the layout settings. To do this, navigate to the layout section, select the field properties, and enable the option labeled "This field is mandatory." Once enabled, the field will become mandatory both during record creation and when editing existing records.
21. Can telephony integrations with Zoho Desk automatically create tickets for answered calls?
Typically, telephony integrations with Zoho Desk only support automatic ticket creation for missed calls. To automatically create tickets for answered calls, you can implement a Custom Function Workflow.
22. How can I enable the parent-child ticketing feature in Zoho Desk?
To enable the parent-child ticketing feature, please raise a request through this form, and we will enable it for you.
23. Is there a way to update a picklist value from A to B in tickets layout?
Within the layouts for picklist fields, there is an option called "Replace Values." When you use this option, the system will replace the old value with the new value you specify and automatically update all previous records accordingly.
24. What is a Lifecycle report, and how is it different from the History tab?
The Lifecycle report allows you to categorize and filter specific events related to status updates, department changes, event owners, and time frames.
In contrast, the History tab provides complete details of all events and entries related to a ticket.
The History tab shows every action taken on a ticket, while the Lifecycle report focuses specifically on selected events, providing a more targeted view.
25. Where can I find the "Ticket and Thread Summary" feature in Desk?
We recently updated the UX/UI for ticket summaries. Now, when you open any ticket in the detailed view, you'll see a button called "Zia Summary" at the top. Clicking this button to generate a summary of the entire ticket, including the subject, incoming and outgoing conversations, private comments, and public comments.
26. Can I customize the Zia summary to display specific information?
Yes, you can customize the Zia summary. For example, you can choose to summarize only incoming messages to understand the user's query, or only private comments to review internal discussions. You can select these options within the Zia summary feature.
27. How can I summarize individual threads within a ticket?
To summarize individual incoming or outgoing threads, click on the "More" icon next to the thread. Under the AI section, you'll find the "Summarize" option, which allows you to generate a thread summary. Refer here for details.
28. Is the Table view for tickets available for "All Departments"?
Currently, the Table view support for tickets across all departments is under implementation and not yet available.
29. What is Multilingual Support in the Customer Happiness rating feature?
Multilingual Support is a feature that allows you to present customer happiness rating forms in multiple languages. Previously, these forms were available only in English. With Multilingual Support, you can offer customer happiness surveys in the customer's preferred language, improving the accuracy and quality of the feedback you receive. Currently, we support more than 27 languages.
30. How can I configure translations for the customer happiness rating questions and choices?
You can configure translations for each question and choice under the Languages-Multilingual from Setup > Customization > Languages. Translate the questions and choices, and these translations will be displayed to customers based on their language preferences.
31. How does the system determine which language to display to the customer?
If the customer is a registered end-user in the help center, the system automatically detects and uses the language based on the user's preferences. If the customer is not registered, the system will use the language specified in the language field of the ticket to determine which language to display.
32. What is the Blueprint feature, and how does it work?
Blueprint is a feature designed to streamline and enforce specific processes that agents must follow when handling tickets. It ensures consistency and adherence to defined workflows.
For example, if you run an e-commerce store and want your agents to follow a specific process before changing a ticket status (such as from "open" to "on hold," or "on hold" to "refund initiated"), you can use Blueprint to define the required steps. This might include actions such as sending a reply to the customer, adding proper comments, or updating specific fields before allowing the status change.
33. What are the benefits of implementing Blueprint in ticket handling?
Implementing Blueprint helps ensure that agents follow a consistent, structured process when managing tickets. It enforces required actions and transitions, improving overall efficiency, accuracy, and quality of customer service.
34. When an Agent creates a ticket in one department and the ticket is moved to another department, the original creator loses visibility of that ticket because they don't belong to the receiving department. The ticket only becomes visible only if the ticket is shared to the creator's department again. Using the help center as an alternative is inconvenient because users must access a separate portal and cannot view internal notes. How can you address this?
Currently, Zoho Desk operates with department-specific categorization for both agents and tickets. If an agent (Agent A) has access only to Department A, they can only view tickets within Department A. Once a ticket created by Agent A is moved to Department B, Agent A loses visibility unless the ticket is explicitly shared back with their original department. Allowing agents to view tickets from departments they don't belong would cause conflict with the core concept of department-specific categorization, data privacy, and sharing policies. So, an agent can only access tickets within departments they have explicit access to, even if they created the ticket.
35. Have you encountered an issue where, when two department emails are mentioned in the 'To' address, a ticket is created in only one department instead of both? We have a mail service provider that auto-forwards emails individually to Desk support emails. After disabling the merge function, we noticed duplicate conversations appearing in the same department rather than separate tickets in two different departments. Why is this happening?
To identify why tickets aren't created in both departments when two department emails are included in the 'To' address, we need to analyze the email headers or the delivery method used by your mail service provider. This analysis will help us understand why the ticket is created in only one department and why both conversations appear in the same ticket. Please send us a sample email that should have created tickets in both departments to support@zohodesk.com. We will analyze it and provide you with a possible solution or pinpoint exactly where the issue lies.
36. How to send one email to multiple departments from Zoho Desk?
Currently, Zoho Desk does not support sending a single outgoing email directly to multiple departments. However, you can consider alternative methods:
- Use the CC field to include multiple recipients.
- Set up workflow automation to notify multiple email addresses using the recent thread content placeholder.
37. When reviewing analytics reports on resolution time, how is the time calculated for tickets in 'On Hold' status?
When generating a report based on resolution time, the resolution time calculates both open and on-hold time. However, if you generate reports specifically based on agent performance, the resolution time calculation excludes the on-hold time.
38. Is it possible to allow certain customers to view Analytics dashboards?
To provide access to analytics dashboards for specific customers, there are two possible approaches:
a. Create customized dashboards and embed them in your Help Center using custom widgets. (or)
b. You can add these customers as "light agents," allowing them limited access to preview specific dashboards.
39. Is it possible to include detailed information within the email body of reminder and comment notifications?
You can include detailed information in email notifications by adding placeholders like "Recent Thread" or "Recent Comment" to your email templates. This ensures the actual comment or thread content appears in the email body, rather than just a link.
40. Can we upload video recordings directly into the Knowledge Base?
Yes, you can upload video recordings directly into the Knowledge Base editor using the attachment option. The attachment feature supports files up to 20 MB. Alternatively, you can use cloud storage options to include larger video files.
41. Is there a way to view Zoho Desk tickets within Zoho CRM seamlessly?
Yes, it is possible to view Zoho Desk tickets alongside CRM contacts or accounts by integrating Zoho Desk with Zoho CRM. This integration allows you to access and manage Desk tickets directly within your CRM, creating a seamless experience for your team.
41. How can agents be notified that a customer has open tickets in other departments, even if they don’t have access to those departments?
There is a permission available that allows users to search for tickets across departments. Tickets from other departments can be displayed in a search view, even if the agent does not have direct access to those departments. To notify agents of tickets in other Departments, enable the permission Access Data across Departments.
42. Can we export ticket view results based on applied filters such as agent, timeframe, classification, status, or other criteria?
Zoho Desk supports exporting tickets classified under a custom view. However, filters applied directly within the tickets view are personal and temporary, and exporting these filtered results is on our roadmap.
Here are the recordings from our Ask the Experts 19 sessions:
Recent Topics
Add Israel & Jewish Holidays to Zoho People Holidays Gallery
Greetings, We hope you are doing well. We are writing to request an enhancement to the Holidays Gallery in Zoho People. Currently, there are several holidays available, but none for Israel and none for Jewish holidays (which are not necessarily the same
ZO25: The refreshed, more unified, and intelligent OS for business
Hello all, Greetings from Zoho One! 2025 has been a remarkable year, packed with new features that will take your Zoho One experience to the next level! From sleek, customizable dashboards to an all-new action panel for instant task management, we’ve
Introducing Multi-Asset Support in Work Orders, Estimates, and Service Appointments
We’re excited to announce a highly requested enhancement in Zoho FSM — you can now associate multiple assets with Work Orders, Estimates, and Service Appointments. This update brings more clarity, flexibility, and control to your field service operations,
[Product Update] Locations module migration in Zoho Books integration with Zoho Analytics
Dear Customers, As Zoho Books are starting to support an advance version of the Branches/Warehouses module called the Locations module, users who choose to migrate to the Locations module in Zoho Books will also be migrated in Zoho Analytics-Zoho Books
Introducing Schedules for smarter availability management
Greetings from the Zoho Bookings team! We’re excited to introduce Schedules, a powerful enhancement to manage availability across your workspace. Schedules are reusable working-hour templates that help you define and maintain consistent availability across
Why Zoho Contracts Prefers Structured Approvals Over Ad-hoc Approvals
Approvals are one of the most important stages in a contract’s lifecycle. They determine whether a contract moves forward, gets revised, or needs further discussion. The approval process also defines accountability within the organization. Zoho Contracts
Whatsapp Connection Status still "Pending" after migration
Hello, I migrated my WhatsApp API to Zoho from another provider a day ago. So far the connection status is still “Pending”. There is a problem? How long does it usually take?
Kaizen #226: Using ZRC in Client Script
Hello everyone! Welcome to another week of Kaizen. In today's post, lets see what is ZRC (Zoho Request Client) and how we can use ZRC methods in Client Script to get inputs from a Salesperson and update the Lead status with a single button click. In this
How to Filter timewise question to check uploaded one month or two months before in these community question ?
i want to find the question that is asked some month or before any particular year, so how can i filter it ?
Proposal for Creating a Unique "Address" Entity in Zoho FSM
The "Address" entity is one of the most critical components for a service-oriented company. While homeowners may change and servicing companies may vary, the address itself remains constant. This constancy is essential for subsequent services, as it provides
Workflow Down/Bug
We have a workflow that sends an email to one of our internal departments 10 minutes after a record is created in a custom module. The workflow actually works correctly. However, we have now noticed that on January 8, between 3:55 p.m. and 4:33 p.m.,
Service Locations: Designed for Shared Sites and Changing Customers
Managing service addresses sounds simple—until it isn’t. Large facilities, shared sites, and frequently changing customers can quickly turn address management into an operational bottleneck. This is where Service Locations deliver clarity and control.
Can I re-send the Customer Satisfaction Survey after a ticket closure?
Hello, Some customers does not answer the survey right after closure, is it possible to re-send after a few days or weeks? Best Regards!
Filter contacts based on selected category in Zoho Desk ticket
Hello community, I’m setting up the Tickets module in Zoho Desk and I need help implementing the following: When a category is selected in a ticket, I want the Contact field to be filtered so that it only displays contacts that are related to that category.
Profile Page View Customization
I need to change the fields, sections from the profile view of an emplyoyee.
Zoho Desk Android app update: Filter, Sort and Saved filters Enhancements
Hello everyone! We are excited to introduce the below features on the Android version Zoho Desk mobile app: 1. Filter & Sort support has been introduced for the Contacts and Accounts modules. 2. Sort options is now available in Custom Modules as well.
Accessing shared mailboxes through Trident (Windows)
Hi, I have a created a couple of shared mailboxes. The mailboxes are showing up on the browser based Zoho workplace, but I cannot seem to figure out how to access my shared inboxes through Trident (Windows). Am I missing something or is this feature not
filtering lookup field options based on information in another module.
In our CRM system. We have the standard Accounts and Deals modules. We would like to introduce the ability to classify Accounts by Sector. Our desired functionality is to have a global list of all sectors that an Account can select, with the ability to
Service op locatie organiseren met Zoho FSM: waar lopen organisaties tegenaan?
Bij organisaties met service teams op locatie merken we vaak dat de complexiteit niet zozeer in de planning zelf zit, maar in wat er rond die planning gebeurt. Denk aan opvolging na interventies, consistente servicerapporten, en het bijhouden van installaties
Introducing Assemblies and Kits in Zoho Inventory
Hello customers, We’re excited to share a major revamp to Zoho Inventory that brings both clarity and flexibility to your inventory management experience! Presenting Assemblies and Kits We’re thrilled to introduce Assemblies and Kits, which replaces the
Does the ability exist to make tax on the customer profile mandatory?
I am reaching out to inquire about the possibility of making the "Customer Tax" field mandatory when creating a new customer in Zoho. We want to ensure that all customers have their tax information recorded to maintain compliance with our internal processes.
email association with CRM
Why is it 2024 (almost 2025) and Zoho has not figured out how to integrate email with CRM? It is so inconsistent at associating emails within CRM. I am an attorney. I have clients and work with other attorneys. Attorney John Doe is associated with multiple
Credit Note for Shipped and Fatoora pushed invoices
We have shipped a Sales Order and created an Invoice. The Invoice is also pushed to Fatoora Now we need to create a credit note for the invoice When we try it, it says we need to create a Sales Return in the Zoho Books, we have already created a Sales
FSM - Timesheet entires for Internal Work
Hi FSM Team, Several of my clients have asked how they can manage internal timesheets within Zoho FSM. Since their technicians already spend most of their day working in FSM, it would be ideal if they could log all working hours directly in the FSM app.
Add a way of clearing fields values in Flow actions
It would be great if there was an option to set a field as Null when creating flows. I had an instance today where I just wanted to clear a long integer field in the CRM based on an action in Projects but I had to write a custom function. It would be
Role Management
I am creating an analytics dashboard for a company that will be utilized by its various departments such as Finance, Marketing, and HR. My goal is to design the dashboard with separate tabs for each department. Additionally, I plan to implement role-based
Announcing new features in Trident for Windows (v.1.37.5.0)
Hello Community! Trident for Windows just received a major update, with a range of capabilities that strengthen email security and enhance communication. This update focuses on making your mailbox safer and your overall email experience more reliable.
Early Payment Discount customize Text
Hi, I’m currently using Zoho Books and am trying to customize the standard “Early Payment Discount” message that appears in the PDF invoice template. I’ve reviewed the documentation here: https://www.zoho.com/books/help/invoice/early-payment-discount.html
Deprecation of SMS-based multi-factor authentication (MFA) mode
Overview of SMS-based OTP MFA mode The SMS-based OTP MFA method involves the delivery of a one-time password to a user's mobile phone via SMS. The user receives the OTP on their mobile phone and enters it to sign into their account. SMS-based OTPs offer
DKIM Now Mandatory - Changes to Zoho Forms Email Policies
Hello Zoho Forms Users, This post is to inform you about an important update regarding the authentication of all email domains in your Zoho Forms account. This year, we are doubling down on our commitment to deliver a secure, seamless, and empowering
Call description in notes
When completing a call, we type in the result of the call in the description. However, that does not show up under the notes history on the contact. We want to be able to see all the calls that have taken place for a contact wihtout having to go into
Email Address for Contact not Populating
When I click "Send Mail" from a Contact's page, their email address does not auto populate the "To" field. How do I make this happen?
New in CRM: Dynamic filters for lookup fields
Last modified on Oct 28, 2024: This feature was initially available only through Early Access upon request. It is now available to all users across all data centers, except for the IN DC. Users in the IN DC can temporarily request access using this form
Why hybrid project management might be the best fit for you?
Project management techniques are designed to equip teams with proven methods for easy and efficient project execution. While management teams may have apprehensions about adopting the hybrid method of project management, we’ve compiled the top reasons
Allow all Company Users to view all projects, but only owner/admins can change projects
I was wondering if there was a permission setting I could adjust to allow all our company users to see all projects created. Then, only the project owners and admins with the change permission. Thanks
Seeking help to be able to search on all custom functions that are defined
Hello I have a lot of custom functions defined (around 200) and i would like to search some specific strings in the content of those. Is there a way to accomplish that? If not, is there a way to download all existing custom functions in some files locally
Add Bulk Section / Grid Layout Duplicate Feature in Zoho Forms Builder
Currently in Zoho Forms, users can only duplicate individual fields. There is no option to duplicate an entire section or two-column/grid layout with all internal fields. This becomes inefficient when building structured forms such as Family Details,
Leistungsdatum in Rechnungen (Zoho Books)
Hallo, ist es irgendwie möglich den Leistungszeitraum in der Rechnung aufzuführen? Beste Grüße Aleks
Zoho Trident Windows - Streams Not Visible
Namaste We’re having an issue with Streams not being visible in Trident (Windows), which is important for us as we share many emails internally. It appears that the feature to show Streams above the Inbox folder, as seen in the default mailbox view, is
Sales IQ Chat Widget is Only Displaying Last Name
Can anyone suggest why the widget is only displaying "last name"?! We have the latest version of the wordpress plugin installed. Thanks Thanks!
Next Page