Hello Marketers,
Welcome back to yet another post! Today, we'll talk about why warming up your sender domain matters. Imagine you've recently started a business and want to share the news with your customers. You've designed a great email campaign using Zoho Campaigns. Naturally, you're excited and want to send it to all your contacts in one go; but if you skip the domain warm-up step, there's a good chance your emails will end up in spam instead of your contacts' inboxes.
What is a domain?
A domain is the unique address that marks a person's or business's identity on the internet. It's used for creating websites and sending emails, and helps recipients and service providers recognize who the message or website belongs to and whether it's coming from a trusted source.
If your email address is adam@zylkermotor.com, then zylkermotor.com is your domain.
What is domain warming?
Domain warming is a way of introducing your new domain to email service providers (ESPs) like Gmail, Yahoo, Outlook, and Zoho Mail. Instead of sending an email campaign to all your contacts at once, you start with small batches and send them to the people who are most likely to open and interact with your emails. This step is important because ESPs want to make sure you're a genuine sender. When they see you sending emails slowly and consistently—and your recipients are opening them—they start trusting your domain. But if you suddenly send thousands of emails from a brand new domain, it may look suspicious to them, like spam activity. Since they don't have any record of your past sending behavior, they may block your emails or push them to the spam folder. Warming your domain helps avoid that by showing ESPs that you're a real business sending valuable messages to people who want to hear from you.
This isn't so different from other aspects of our day-to-day lives. For example, if we decide to start weight training, we don't walk into the gym and immediately try to lift the heaviest weight possible; we know that in doing so, we'll not only fail but also likely cause ourselves serious injuries. What we can do is start with lighter weights and fewer repetitions and allow our muscles and joints (in this case, our domains and IP reputations) to adapt to the stress gradually. This process of progressive overload is necessary to build the strength and capacity to handle heavier loads later. In the same way, sudden, massive email volumes are like lifting the "heaviest weight" at the gym; it stresses the receiving systems. A slow, controlled increase in volume helps you safely build your sending capacity without "injuring" your reputation.
Why domain warming matters
As ESPs identify new and unknown domains as suspicious, sending large volume of emails suddenly without a sending history can lead to the following consequences:
- Low deliverability: Your emails will consistently land in spam folders, rendering all of your campaign efforts useless.
- Higher bounce rates: Since your sender reputation hasn't been established yet, mailbox providers may reject your emails, which may cause excessive hard or soft bounces and signal poor sending hygiene.
- Reputation damage: Once your domain/IP is flagged as a potential spammer, it's very difficult and time-consuming to repair that bad reputation.
- Blacklisting: In severe cases, your sending domain could be placed on an industry-wide blacklist, halting your email efforts entirely.
- Lower engagement: When emails don't reach inboxes, few people see or interact with them, which means fewer opens, clicks, conversions, and lower overall campaign performance.
How to warm up your sender domain using Zoho Campaigns: A use case
Morris has recently expanded his store, Zylker Designs, into an online presence and set up a domain called zylkerdesigns.com. Excited about the launch, Morris wants to draft a welcome email campaign and send it to 20,000 subscribers in one go. He approaches Eva from the Zoho Campaigns Support team with his requirement, who warns him that sending a large volume of emails from a new domain can trigger ESPs to mark the emails as spam—which is not an ideal start for Morris' new business. She recommends that Morris warm up his domain using Zoho Campaigns before sending his email in bulk.
Here's how he can achieve it:
- Step 1: Morris has to authenticate his sender domain under Settings → Domain Authentication using SPF, DKIM, and DMARC to prove legitimacy and security.
- Step 2: Instead of targeting all 20,000 contacts at once, Morris can group his contacts into different segments, categorizing them based on most engaged and active subscribers (those who frequently open and click emails), moderately engaged, and so on.
- Step 3: He can then send his campaigns to small batches of these contacts, and then gradually increase the number of recipients. He can try sending the campaigns based on recipients' time zones or optimal open times to increase his chances that recipients will notice and open his emails.
- Step 4: For the next two to four weeks, Morris must slowly increase his daily sending volume after closely monitoring his open rates, bounce rates, and spam complaints under Campaign Reports.
- Step 5: When the engagement metrics start looking healthy and consistent, Morris can scale up and send emails to his entire audience, because by now ESPs will have recognized his domain as a trusted sender with a healthy reputation and good inbox reach.
By following this approach, Morris can ensure better deliverability, brand credibility, and email performance, laying a strong foundation for all his future email campaigns.
Wrapping it up
Warming up your sender domain isn't merely considered a best practice; it's a primary step that determines whether your emails reach your recipients' inboxes or not. By gradually building trust with ESPs, authenticating your domain, and sending first to contacts who engage with your emails, you can make sure to avoid deliverability problems right from the start. So before hitting "send" on your next bulk campaign, keep in mind that a warm domain earns a strong reputation, and a strong reputation earns better inbox placement, higher engagement, and healthier results.
Regards,
Aiswarya Jayaprakash
User Education
Zoho Campaigns
Recent Topics
New and improved API resources for Zoho Sign Developers
Hello, Developers community! We know that for you, an API's real value depends on how quickly, easily, and reliably you can integrate the it with your application. That's why we're excited to talk about the recent improvements to our developer resources,
Project Approval Process Workflow
Issue: When a new Project is created, there is lack of process/workflow that provides their manager a process to approve or review. Suggestion/Idea: Similar to “Workflow”, we need “Workflow” ability at Project level, where based on the criteria of the
Why can I not choose Unearned Revenue as an account on items?
Hello, I do not understand why we don't have the ability to code an item to unearned revenue. It is not an uncommon situation to have in business. I understand that there is the Retainer invoice as an option, however that doesn't really work for us. Our
Rules not working properly
I created a rule to display certain fields on certain states. But it seems to be not working. It hides the fields even when I selected California, (which is a state that should show the fields when selected)
Notebook font size issue
If I copy something from somewhere and paste it in my notebook, the font size becomes smaller.
Sign in process is beyond stupid. I'd rather plug my phone into USB and copy files than sign in to this POS.
792 clicks and fields to fill in just to get into a 3rd rate app is too stupid for me.
cant use mail API
I have generate Auth token from https://accounts.zoho.com/apiauthtoken/nb/create?SCOPE=ZohoMail/ZohoMailApi&EMAIL_ID=Zoho Mail Username or Email ID&PASSWORD=Your Zoho Mail Password and get the token but when i use that token on http://mail.zoho.com/api/organization/
Ampersand in URL parameter // EncodeURL does not work
Hi Zoho, I have a url link with a parameter. The parameter is including ampersand in some cases (Can be "H&M" or "P&I") When trying to use %26 instead of "&" (the result I get using EncodeURL()) I get H%26M instead of H&M in the parameter field. How can I solve this? Thanks! Ravid
how can we create in zoho crm a new contact when the looup does not find a similar existing one
In forms/integrations/zoho crm / ne w record tab, contact name is to be mapped with my form contact name. When I go in biew edit/lookup configuration, I don t get the options (help dedicated page simply repeat the same info you get in the app) and does
Directory Websites
Directories are a good website category to gain search engine traffic. Directories for a professional service category as an example can help their members in search results over their individual website. It would be nice to have a directory template
Manage Task on Mobile
How do we manage our task on mobile devices? It seems that there should be a standalone mobile app to handle the new task features. The new features released in regards to Task management are great by the way! Now we need to bring that all together in
Set Default Payment Method & Default account
Hi, I would like to know how to set the default payment method and default bank account when recording payments in zoho books. At present we have to change these fields everytime we record a payment, which leads to potential error and as we have a very
Customer Portal on Zoho Desk
Hi, I'd like to know more about the items below I found when setting up the Customer Portal on Zoho Desk. Could someone help me explaining these in details? Especially the 2nd and 3rd point. Thanking you in advance! Permissions Customers can sign up for Customer Portal Customers can view tickets of their organization (contacts) Customers must register to access Customer Portal Display Community in Customer Self Service portal
Computer Showing Offline in Unattended Access
I have a computer that was connected to the internet but showing offline in Assist. I tried uninstalling the program and deleting it from Zoho Assist the reinstalling and it still does not show up. I have been a user for several months and am not pleased with the lack of connectivity with Assist. If this continues I will have to find another product. The computer I reinstalled it on is not even showing up in Assist now. The name is NYRVLI-PC. Thanks
Zoho CRM Portal Error
Hi, We’re experiencing an issue with the Zoho CRM Portal. When we try to access it, we receive an HTTPS connection error: net::ERR_CERT_COMMON_NAME_INVALID. If we proceed past that, we then get a 400 Bad Request error. Could you please help us resolve
Integrating Zoho CRM EmbeddedApp SDK with Next.js — Initialization and Data Fetching Issues
You can get an idea from my code I have given in end: First, I worked on a React project and tried the same thing — it worked. My goal was to import the Zoho script and then load contacts using the Zoho Widget SDK, which was successful in React. Now,
monetizing the courses
Can I add a price for course enrollment ?
Can we add zoho books features like invoices estemates etc on our zohocommerce website. When our customer login with their account they can able to see all books features in one place on zohocommerce?
Can we add zoho books features like invoices estemates etc on our zohocommerce website. When our customer login with their account they can able to see all books features in one place on zohocommerce?
Taxes for EU B2B Transactions
Currently, ZC doesn't seem to have a procedure for validating VAT numbers of businesses purchasing in another EU state, and removing local VAT is valid. This is essential for all inter EU B2B trade.
Unable to Receive Emails on Zoho Mail After Office 365 Coexistence Setup – Error: 553 Relaying Disallowed
Hello, My domain name is bigniter.com, and I’ve been using Zoho Mail as my email service provider without any issues. Recently, I followed the steps outlined in the Zoho documentation to enable Coexistence with Office 365: 🔗 https://www.zoho.com/mail/help/adminconsole/coexistence-with-office365.html#multi-server
Candidate Registration/Invitation
It would be great to include the 'invite' candidate functionality into some of the automation functions - ether through a custom function trigger or webhook or accessible through an email template. Currently there is no way to add this functionality into any workflows or blueprint steps which, I find limits the ability to invite candidates to engage with us directly through our candidate portal.
[Free Webinar] Learning Table Series - Creator for Infrastructure Management | A Partner-driven collaborative session
Hello Everyone! We’re excited to invite you to another edition of Learning Table Series, where we showcase how Zoho Creator empowers industries with innovative and automated solutions. About the Learning Table Series The Learning Table Series is a free,
I have error AS101 when I try to add paypal@mydomain.com to Zoho
Please help me with this. I tried to call the help line 4 times but don't get any response.
VAT on Multiple Expenses
Firstly, might I say I am based in Ireland, and I'm not an accountant, and therefore my understanding of procedures could be somewhat limited. Scenario. An employee pays for items throughout a month, and therefore their claim for expenses includes multiple items - some of the items are VAT deductible (eg, an IT product) and some are not (eg, a client lunch). Discovery The odd thing in ZBooks, is that whilst it seems possible to add a VAT rate to a one-off item of expense, it is not possible to add
Agent assignment filter?
Godo day, We are starting to play with FSM to see if it's going to work for our needs. Now so far we have found that it's very restrcitve in the field department you you have layout rules or can't even hide fields depending on the users roles. We can't
Kiosk Page Refresh
We have a Kiosk running from a button in contacts to update values and also add related lists, which works great, but when the kiosk is finished the page does not refresh to show the changes. Is there a way to force the contact to refresh/update when
Tips & tricks: Make SalesIQ automations work for you
Every day, thousands of visitors land on your website. Some browse, some buy, and some leave without a word. But, wouldn’t it be great if you could automatically know who’s interested, engage them at the right moment, and never miss a lead, and all this
Digest Octobre - Un résumé de ce qui s'est passé le mois dernier sur Community
Chers utilisateurs, Faisons le point sur les temps forts du mois d'octobre au sein de notre Community Zoho France. Partager des informations sensibles, comme des mots de passe, peut vite devenir compliqué et risqué. Les données circulent par email ou
How do I fully delete a user account
Hi, I have two old accounts on my CRM which are inactive and show as 'Closed' in the list of users. BUT they are basically still there. How do I fully delete these accounts? They appear in some parts of CRM still such as the on the contact record emails
Automatically Add Recurring Zoho Meeting Events to Zoho Calendar / Zoho Meeting Calendar
Hello Zoho Meeting Team, Hope you are doing well. We would like to request an enhancement regarding recurring meetings created inside Zoho Meeting. At the moment, when we schedule a recurring meeting in Zoho Meeting, it does not appear in Zoho Calendar
Credit Management: #6 Tackling Common Mistakes in Credit Based Billing
Businesses extend credit to build relationships, make buying easy, and drive more sales. But somewhere between extending and collecting, things begin to slip. A few late payments here and there, an overlooked invoice, and a backlog make cash flow feel
Updating Blueprint stage from my Deluge function
Hi all, I need to update the blueprint stage. Its almost working, but ONLY if the current Deal stage is 'Closed Lost'. On any of my custom stages that Ive specified in the pipeline it doesnt work! My code: dealmap = Map(); deal_stage = deal.get("Stage");
Canvas: is it possible to have a fixed header?
Hello. Does Canvas provide the option to have a fixed header, similar to the standard view? It would also be interesting for other parts of the interface, like the header or sidebar of the tab section. Thanks!
Limited layout rules in a module
There is a limit of 10 layout rules per module. Is there a way to get that functionality through different customization or workflow + custom function (easily accessible), etc. Having just 10 is limiting especially if module contains a lot of data. Are
Using Contains as a filter
We are using Zoho Reports, ServiceDesk Plus analytics. I do not see how to create a report filter using Contains comparison of a string values, is one string contained in another. For example, Task Title contains the word Monitor. Is this possible in Zoho Reports? This reporting feature is available in SDP reporting. Thanks in advance, Craig Rice
Set off Unearned Revenue
Hi, I would like to get a clarification on the below. I have an opening balance of BD.725/- in my Unearned Revenue A/c which includes the overpayments of 6 clients. No One of my clients settled his invoices by paying the value of the invoice less the
How Zoho Desk contributes to the art of savings
Remember the first time your grandmother gave you cash for a birthday or New Year's gift, Christmas gift, or any special day? You probably tucked that money safely into a piggy bank, waiting for the day you could buy something precious or something you
Add Webhook Response Module to Zoho Flow
Hi Zoho Flow Team, We’d like to request a Webhook Response capability for Zoho Flow that can return a dynamic, computed reply to the original webhook caller after / during the flow runs. What exists today Zoho Flow’s webhook trigger can send custom acknowledgements
When moments in customer support get "spooky"
It’s Halloween again! Halloween is celebrated with spooky symbols and meanings based on history and traditions, with each region adding its own special touch. While we were kids, we would dress up in costumes along with friends, attend parties, and enjoy
How to backdate record payment for the invoice
I would like to record a payment which happened 2 days ago, but I am not able to select any date later than today. I backdated the invoice, too, but it doesn't change anything
Next Page