Feature Request: Ability to set Default Custom Filters and apply them via URL/Deluge

Feature Request: Ability to set Default Custom Filters and apply them via URL/Deluge

I've discovered a significant gap in how Zoho Creator handles Custom Filters for reports, and I'm hoping the Zoho team can address this in a future update. This limitation has been raised before and continues to be requested, but remains unresolved.

The Issue
According to the official documentation, Custom Filters allow developers to create predefined filter combinations that users can select from a dropdown menu. This is a powerful feature for simplifying complex filtering scenarios for end users.
However, there is no way to set a default Custom Filter that automatically applies when a report loads, nor can Custom Filters be applied via URL parameters or Deluge scripts.
Example Use Case
Consider a simple Clients Report with Custom Filters for "Active Clients" and "Inactive Clients".
Desired behavior:
  • Report loads with "Active Clients" filter pre-applied by default
  • Users can remove the filter to see all clients
  • Users can switch to "Inactive Clients" filter when needed
Current reality: The report always loads unfiltered, showing ALL clients. Users must manually select the "Active Clients" filter every single time they access the report—there's no way to set it as the default.
The Problem
Zoho Creator provides excellent support for field-based filtering via functionality-based URLs—including operators like EQUALS, CONTAINS, BETWEEN, date ranges, and more. However, Custom Filters exist in complete isolation from all programmatic control.
Capability Field-Based URL Filtering Custom Filters
User can manually apply ✓ Yes ✓ Yes
Apply via URL parameter ✓ Yes
?FieldName=value
✗ No
Use operators (CONTAINS, BETWEEN, etc.) ✓ Yes
&FieldName_op=26
✗ N/A
Set as default on report load ✓ Yes (Report Criteria) ✗ No
Apply via openUrl in Deluge ✓ Yes ✗ No
Pre-select on embedded reports ✓ Yes ✗ No
"Hard" vs. "Soft" Filtering — The UX Problem
This limitation creates a fundamental UX trade-off that developers shouldn't have to make:
Approach Behavior User Experience
Report Criteria
(Hard Filter)
Permanently applied. Cannot be removed or changed by the user. Users are locked in. They cannot explore beyond the predefined criteria.
Custom Filter
(Soft Filter)
User-selectable. Can be applied, changed, or removed at will. Users start with a focused view but can remove it to see the bigger picture.
The problem: We are forced to use "Hard Filters" (Report Criteria) when the use case actually requires "Soft Filters" (a sensible default that users can adjust). This hurts the end-user's ability to explore data.
The "AND Logic Trap" with Pages:
Report Criteria is global—it persists everywhere: direct browser access, mobile app, embedded in Pages, and exports. When embedding a report in a Page, any criteria added via the Page Builder uses AND logic with the existing Report Criteria:
Report Criteria: Status == "Active"
Page Embed Criteria: City == "New York"
Result: Status == "Active" AND City == "New York"
You cannot "subtract" or override Report Criteria. If your "Clients Report" has hard-coded criteria showing only "Active" clients, you cannot embed that same report on an "Archived Clients" page. This forces you to clone the report entirely.
Custom Filters are designed to solve this—allowing a single report to adapt to different contexts. But without the ability to set a default Custom Filter via URL or Page embed, this flexibility is completely inaccessible.
The Current Workarounds (All Suboptimal)
To achieve "default filter" behavior, developers are forced into one of these suboptimal approaches:
Workaround 1: Report Cloning ("Report Bloat")
Many users simply duplicate the "Clients Report," rename it "Active Clients Report," and set hard-coded criteria. This leads to:
  • Application bloat with multiple near-identical reports
  • Violates the DRY (Don't Repeat Yourself) principle
  • Maintenance nightmare—changes must be applied to every clone
  • Confusing for users who see multiple similar reports in navigation
Workaround 2: URL Parameter Construction
Abandon Custom Filters entirely and replicate the filter logic using URL parameters:
// Instead of simply setting "Active Clients" as the default Custom Filter,
// developers must construct URL parameters manually:

base_url = "https://creatorapp.zoho.com/myaccount/crm-app/#Report:Clients_Report";

// Replicate the Custom Filter logic with field-based parameters
filter_params = "?Status=Active&Status_op=18"; // 18 = EQUALS operator

openUrl(base_url + filter_params, "same window");
Additional friction: Finding the correct Operator ID (e.g., 18 for EQUALS, 26 for CONTAINS, 58 for BETWEEN) requires digging through documentation. Custom Filters abstract this complexity away—losing them forces developers to deal with these obscure codes.
Problems with both approaches:
  • Complex filter logic must be duplicated—once in the Custom Filter definition (for manual use) and again in Deluge scripts (for automation)
  • No single source of truth for filter criteria
  • Maintenance nightmare when filter logic changes—updates required in multiple places
  • Users see raw URL parameters instead of friendly Custom Filter names
  • Custom Filters with complex multi-field criteria become extremely verbose URL strings
What Should Happen Instead
Proposed Solution 1: Default Custom Filter Setting
Add a simple option in Report Properties to designate one Custom Filter as the default:
Report Properties → Custom Filters → [Filter Name] → ☑ Set as Default
When enabled, this filter would automatically apply when the report loads, while still allowing users to switch to other Custom Filters or clear it entirely.
Proposed Solution 2: URL Parameter Support
Allow Custom Filters to be specified via URL parameter, consistent with existing functionality-based URL patterns:
https://creatorapp.zoho.com/myaccount/crm-app/#Report:Clients_Report?zc_CustomFilter=Active_Clients
This would enable developers to programmatically direct users to reports with the appropriate Custom Filter pre-applied, using a single clean parameter instead of replicating complex field-based criteria.
Proposed Solution 3: Deluge Integration
Support Custom Filter names in openUrl calls:
// Clean, maintainable approach
openUrl("#Report:Clients_Report?zc_CustomFilter=Active_Clients", "same window");

// Instead of duplicating all the filter logic
openUrl("#Report:Clients_Report?Status=Active&Status_op=18", "same window");
Real-World Impact
This limitation affects any workflow requiring:
  • Default filtered views — A Clients report should show "Active Clients" by default, not all clients
  • Dashboard navigation — Clicking a KPI tile should open a report with the relevant Custom Filter applied
  • Email links to filtered reports — "Click here to see overdue invoices" should pre-apply the appropriate filter
  • Embedded reports in Pages — Different page contexts should show different default filter states without cloning reports
  • Mobile experience — On mobile apps, filters are hidden behind menus. Users often miss them entirely. A default Custom Filter ensures users see relevant data immediately without navigating through menus on a small screen
  • User onboarding — New users should see a sensible default view, not unfiltered data overwhelming them

Developer Impact: Custom Filters are excellent for end-user experience but nearly useless for automation and programmatic control. This gap forces developers to maintain duplicate filter logic—once in Custom Filters for manual use, and again as URL parameters for automation.

Request to Zoho Team

Can this be addressed in a future update?

The current implementation forces developers to choose between:

1. User-Friendly Custom Filters
Easy for users to understand and apply manually, but no programmatic control or default state
2. URL Parameter Filtering
Full programmatic control via ?FieldName=value&FieldName_op=constant, but complex to maintain and requires duplicating filter logic

We shouldn't have to choose—Custom Filters should support both user interaction AND programmatic control.

Community Input Requested: Has anyone else encountered this limitation or found a workaround? I'd love to hear how others are handling scenarios where a default Custom Filter is needed.


    • Recent Topics

    • How do i setup default values for few fields

      We have few fields in CRM like rate of return, type etc - they can be picklist and standard inut fields. picklist we have choice to set default value. but how do we default some value in input type of fields?
    • We know the company but not the contact

      We are fairly new to Zoho, part of our marketing stack is we use products like lead feeder to identify which companies are visiting our site. We are able to match this data to salesiq but cannot find a way to add a company name to the salesiq visitor
    • Customize Calendar view in Teamspaces Settings

      Right now every customization that happens inside of the calendar view inside of CRM is only visible for the specific user. We want to be able to set up calendar views as an admin for specific roles. I would suggest to do that inside of the settings of
    • How to filter subform report based upon main form report in dashboard

      Hi Team, I am creating a dashboard in Zoho Analytics. I want to have a main form report and below I want to show subform report of main form. If I filter the main form with date then I want to show subform records based upon main form. how can I achieve
    • using the Client script I want to Hide Show the Fields

      if Related to service means some of the field like service no want to shoe and hide Amc no , purchase no how i achive this let issu = ZDK.Page.getField('Issue_Related_To').getValue(); if (issu == 'Service') { var field_obj = ZDK.Page.getField('Warranty_Cases');
    • Ask the Expert – Zoho One Admin Track : une session dédiée aux administrateurs Zoho One

      Vous administrez Zoho One et vous vous posez des questions sur la configuration, la gestion des utilisateurs, la sécurité ou encore l’optimisation de votre back-office ? Bonne nouvelle : une session Ask the Expert – Zoho One Admin Track arrive bientôt,
    • Write-Off multiple invoices and tax calculation

      Good evening, I have many invoices which are long overdue and I do not expect them to be paid. I believe I should write them off. I did some tests and I have some questions:  - I cannot find a way to write off several invoices together. How can I do that,
    • Kaizen #210 - Answering your Questions | Event Management System using ZDK CLI

      Hello Everyone, Welcome back to yet another post in the Kaizen Series! As you already may know, for the Kaizen #200 milestone, we asked for your feedback and many of you suggested topics for us to discuss. We have been writing on these topics over the
    • vendors / customers with 2 different address and gst no

      Why can't we have option for more than one address and depending on the state option for more than 1 GST no. ? We have customers / vendors PAN india with different addresses and GST no. for different states.
    • Recurring Automated Reminders

      Hi, The reminders feature in Zoho Books is a really helpful feature to automate reminders for invoices. However, currently we can set reminders based on number of days before/after the invoice date. It would be really helpful if a recurring reminder feature
    • Fail to send Email by deluge

      Hi, today I gonna update some email include details in deluge, while this msg pops up and restrict me to save but my rules has run for one year. can you tell me how to use one of our admin account or super admin account to send the email? I tried to update
    • Transitions do not update fields until the record moves to next stage

      We have a blueprint where a couple of stages have multiple transitions. If only some of the transitions are completed, but not all, Zoho does not update any of the fields impacted by the completed transitions. Is there any way Zoho can udate the fields
    • Zoho CRM - Kiosk Studio : Use action responses across your kiosks with sequential actions

      Hello Everyone, Imagine building a kiosk that gives you full control over how actions are executed in later screens in that same kiosk. What if you could use data from a previous action later in that kiosk—with no interruptions or data gaps? This is exactly
    • Ability to CC on a mass email

      Ability to CC someone on a mass email.
    • Get Cliq Meetings in my O365 calendar

      Hi, we are currently evaluating to replace the Teams Messaging and Meetings with Cliq. We currently still have all our email and calendars in O365. What i want to achieve is, to create a (ZOHO) meeting from Cliq and have this meeting added to my Outlook/O365
    • Custom Button to convert a Deal to a Custom Module?

      Hello Community I am in process of building out a custom CRM for my team and part of this is looking at building out a Custom Button or function of some sort where when a Deal is marked Closed Won the system will allow for a "Convert to Job" option to
    • Power up your Kiosk Studio with Real-Time Data Capture, Client Scripts & More!

      Hello Everyone, We’re thrilled to announce a powerful set of enhancements to Kiosk Studio in Zoho CRM. These new updates give you more flexibility, faster record handling, and real-time data capture, making your Kiosk flows smarter and more efficient
    • Emails Failing with “Relaying Issues – Mail Sending Blocked” in ZeptoMail

      Hello ZeptoMail Support Team, We are facing an email delivery issue in our ZeptoMail account where emails are failing with the status “Process failed” and the reason “Relaying issues – Mail sending blocked.” Issue Details Agent Name: mail_agent_iwwa From
    • Change eMail Template for Event-Invitations

      Hello ZOHO-CRM Team How I can change the eMail Template for Event-Invitations? I work with the German Version of the Free Version. I know how I can modify eMail alerts or Signature Templates, but where I can other eMails modify you send out? Thank you
    • Workdrive Oauth2 Token Isn't Refreshing

      I have set up oauth for a bunch of zoho apis and have never had a problem with oauth. With workdrive i am using the exact same template i usually use for the other zoho apps and it is not working. All requests will work for the first hour then stops so
    • Migrate Your Notes from OneNote to Zoho Notebook Today

      Greetings Notebook Users, We’re excited to introduce a powerful new feature that lets you migrate your notes from Microsoft OneNote to Zoho Notebook—making your transition faster and more seamless than ever. ✨ What’s New One-click migration: Easily import
    • How can I import OLM to Yandex Mail easily?

      For migrating Mac Outlook OLM data to Yandex Mail efficiently, the Aryson OLM Converter is a reliable professional tool that ensures complete data integrity throughout the process. Unlike manual methods, which can risk inconsistent formatting or missing
    • Introducing Radio Buttons and Numeric Range Sliders in Zoho CRM

      Release update: Currently out for CN, JP, AU and CA DCs (Free and standard editions). For other DCs, this will be released by mid-March. Hello everyone, We are pleased to share with you that Zoho CRM's Layout Editor now includes two new field formats—
    • Is it possible to setup bin locations WITHOUT mandating batch tracking?

      Hi fellow zoho users, I'm wondering if anyone else has a similar issue to me? I only have some products batch tracked (items with shelf life expiry dates) but I am trying to setup bin locations for my entire inventory so we can do stock counting easier.
    • Implementing Inventory Process

      I am just starting to create an inventory system through Zoho for a nonprofit. We receive in-kind donations of items for kids, and utilize them in 2 or 3 different programs. Then families come in and take the items. I'm thinking of this structure: Our
    • Best way to start zoho inventory with bulk openning stock

      We are already using zoho book since long time for cars trading company. Now to streamline more, would like to import the excel data of closing stock of inventory to zoho inventory and to start on. Since we need to track each VIN (unique vehicle id number)
    • Service Reports.

      Hello Team, I have a requirement to create multiple service reports for a single AP. That means, in one AP I have 5 service line items, and all line items are linked to assets. Once I complete the AP, I want to generate 5 individual service reports, one
    • Blueprint enhancements - Parallel and multiple transitions, and more

      Last modified on Sep 4, 2023: All Zoho CRM users can now access these enhancements. Initially, these features were available only on an early access basis and by request. However, as of August 2, 2023, they have been made available to all users in all
    • Item Bulk Edit - Allow for Reorder Level

      We're implementing a process for using the Reorder Level field for Items, and I have to go through and add this value to a huge chunk of our Items. It's driving me bonkers that I have to do this individually through the UI rather than bulk updating. It
    • Zoho CRM || Unable to Bulk Assignment of Territories for Contacts

      Dear Zoho CRM Support Team, I hope this email finds you well. We recently performed a bulk upload of Contacts into Zoho CRM using the official sample Excel template downloaded from the CRM. The upload itself was completed successfully; however, we encountered
    • What's New in Zoho Inventory | August – October 2025

      Hello customers, The last quarter has been incredibly productive! We've released a powerful slate of new features and enhancements in Zoho Inventory designed to give you better control, greater efficiency, and expanded functionality across your inventory
    • Disable Zoho Inventory Tracking / Delink Zoho Books & Inventory

      We have integrated zoho inventory with zoho books? Now after a long time, we want to disable inventory tracking and delink these 2 modules. Zoho says we cant do it. Anybody else going thru the same ? Any possibility at all? Why does zoho not allow to
    • Tracking Non-Inventory Items

      We have several business locations and currently use zoho inventory to track retail items (sales and purchase orders). We were hoping to use zoho inventory to track our non-inventory items as well (toilet paper, paper towels, etc). I understand that we
    • Price Managment

      I have been in discussions with Zoho for some time and not getting what I need. Maybe someone can help explain the logic behind this for me as I fail to understand. When creating an item, you input a sales rate and purchase rate. These rates are just
    • Set Warehouse based on Vendor

      Greetings. I would like to set automaticaly the Warehouse based on the Vendor. Context: I am working on an adaptation of a Purchase Order to be used as a Quotation. I have defined that when a user has to raise a quote the Vendor will be "PROCUREMENT" I would like to set the Warehouse to a predefined value when "PROCUREMENT" is set as Vendor. I have tried to do with the Automation feature using the Field Update option, but Warehouse does not is listed as a field. Can you help? Thanks in advance.
    • Auto tagging

      Some of the articles I enter into Notebook get there when I enter them in Raindrop.io and IFTTT copies the articles in Notebook. When this happens the notes are tagged but instead of useful one word tags with topic the tag pertains to the specific article
    • How do I save audio files to my PC that I record into Zoho Notebook from my phone?

      I was thinking of using Zoho Notebook as a way to store composition ideas, as well as for other things if it can handle this. For this to be useful for me though, I need to be able to have an easy way to download those audio files to my PC, either individually
    • Search mails in shared mailbox

      Hi everyone, is there a way to search mails in shared mailbox's? Search in streams or mail doesn't return anything from mails in shared mailboxes. Thanks! Rafal
    • Kaizen #186 : Client Script Support for Subforms

      Hello everyone! Welcome back to another exciting Kaizen post on Client Script! In this edition, we’re taking a closer look at Client Script Support for Subforms with the help of the following scenario. " Zylker, a manufacturing company, uses the "Orders"
    • Writing SQL Queries - After Comma Auto Suggesting Column

      When writing SQL Queries, does anyone else get super annoyed that after you type a comma and try to return to a new line it is automatically suggest a new column, so hitting return just inputs this suggested column instead of going to a new line? Anyone
    • Next Page