Tips and Tricks #27: Play around with shapes in Show

Tips and Tricks #27: Play around with shapes in Show

Hi everyone, 



Welcome back to our next Tips and Tricks post for Show. You can find our previous posts of the Tips and Tricks series here . 

Using custom shapes in your presentations—whether straight or curved, simple or complex—empowers you to create your own designs and illustrate your ideas perfectly. In today's post, we will see how effectively you can use points and segments to customize shapes in Show . 

Our post on, "Convert Shapes Using Show," helps you to convert a shape to another pre-defined shape. But, what if you want to modify the existing shape to something different from what Show offers? Here's where Edit Points come handy. 
 
With Show's Edit Points , you can easily modify any shape to any form using Vector points. These flexible points allow you to customize shapes the way you want. Simply include and drag these points in your existing shape to obtain your new design. 

You can also convert these Vector points to arcs in Show. The arcs are accompanied by control points (green points). Using these control points, you can position the arcs however you like.

Using Edit Points in Show, you can: 
  • Add and move Vector points to form new shapes 
  • Convert Vector points to arcs 
  • Use Keyboard keys to position arcs

Add and move Vector points to form new shapes 

Add Vector points to the shape in your slide when you want to change it to a shape with more than four corners. Here's how you can do this:
  1. Select the figure in the slide and click Edit Points . Vector points appear. 
  2. Select one of the points to copy it (it will turn into a blue dot).
  3. Place the cursor on the area in the shape border where you want to paste the copied Vector point and click to paste. 
  4. Drag any of the points to obtain your desired shape.  


Tip: To select multiple corners of a shape, use either Command key or draw a region covering those corners. 

Convert Vector points to arcs 

You can convert Vector points to arcs when you want to add curves to your shape. You just need to:
  1. Select the figure in the slide and click Edit Points . The shape's Vector points will appear. 
  2. Press the Command key and drag the points inwards or outwards to form an arc accordingly. 
Tip: Double-click a point to change it to an arc and vice-versa.

Use keyboard keys to position arcs 

You can use keyboard commands to slightly adjust the orientation of arcs in your shape. Here are some different types of arcs you can use.

Tilt arcs  

You can tilt arcs in your shape using its control points in Show. All you need to do is: 
  1. Select the figure in the slide and click Edit Points . The shape's Vector points will appear. 
  2. Select a Vector point in the curve. The point will turn blue along with the control points. 
  3. Select a control point, press the Command key, and rotate it to the required degree. As you rotate one control point, the other rotates correspondingly. 

Asymmetrically align arcs  

Move the control points in any direction to add uneven proportions to an arc in Show. 
  1. Select the figure in the slide and click Edit Points . The shape's Vector points will appear. 
  2. Select a Vector point in the curve. The point appears blue along with the control points. 
  3. Select a control point, press the Control key, and move the point. As you adjust one control point, the other changes asymmetrically.

Symmetrically align arcs 

You can also make identically proportionate arcs using control points in Show. 
  1. Select the figure in the slide and click Edit Points . The shape's Vector points will appear. 
  2. Select a Vector point in the curve. The point appears blue along with the control points. 
  3. Select a control point, press the Shift key, and adjust the point either horizontally or vertically. As you alter one control point, the other moves symmetrically.  


Note: You can even move just one control point of the arc in Show. Simply select the control point and press the Option key (for Mac) or Alt key (for Windows). The point becomes moveable. As you adjust this control point, the other remains static. 

You can also remove the existing Vector points in Show. Simply select the point in the shape and click Delete . 

We hope you found this post useful! We'll be back soon with more interesting tips for Show.

You can connect with us on Facebook and Twitter to learn more about how Show can help improve your business communications. You may also write to us at support@zohoshow.com or comment below. 

Happy presenting!
—the Show team


    • Sticky Posts

    • Tips and Tricks #08: Lock and unlock objects in Zoho Show

      Hello everyone, Here is a tip about just one of the many interesting tools in Zoho Show.  Let's say the marketing and design teams are working together on a product launch. With multiple people working on this shared presentation, and rushing to get it

    • Tip and Tricks #01: Take your text for a spin

      Hello folks, Zoho Show's all-new, clear, contextual interface was a great update to an already great product, so we thought you might appreciate some help putting it to good use.  Following this release, the Zoho Show Community is happy to launch  Tips

    • Tips and Tricks #06: Animate text at the paragraph level on Zoho Show.

      Hi guys!   We're back with another Show tip! Before we jump into it, let's read through a quick scenario first.    Say you have a slide with a list of bullets and paragraph levels to present to your audience. The second it's on the screen, your audience

    • Tips and Tricks #05: Add pictures as comments within a slide.

      Hello everyone,   We're back with a new Show tip.  In today's post, we'll look at a more interesting way to comment and collaborate on a slide in Zoho Show. ​ No matter where your colleagues are in the world, using comments to share opinions or give feedback is

    • Tips and Tricks #07: Crop a Picture to Fit a Shape

      Hello everyone, Whether you're designing an adventurous photo collage, your company's brochure, or simply a team introduction for new hires, images always play a crucial role in making your presentation look interesting and interactive.    To help spruce

    • Recent Topics

    • Introducing Connected Records to bring business context to every aspect of your work in Zoho CRM for Everyone

      Hello Everyone, We are excited to unveil phase one of a powerful enhancement to CRM for Everyone - Connected Records, available only in CRM's Nextgen UI. With CRM for Everyone, businesses can onboard all customer-facing teams onto the CRM platform to

    • Granular Email Forwarding Controls in Zoho Mail (Admin Console and Zoho One)

      Hello Zoho Mail Team, How are you? At present, the Zoho Mail Admin Console allows administrators to configure email forwarding for an entire mailbox, forwarding all incoming emails to another address. This is helpful for delegation or backup purposes,

    • Sales order & purchase order item links for item details

      This is fantastic for checking lots of things, I use it a lot. It would be great to see it extended to invoices & bills On another note, may as well throw in my favourite whinge ..... Wish you guys would get the PO receive differences sorted urgently,

    • Zoho Workdrive - Communication / Chat Bar

      Hi Team, Please consider adding an option to allow admins to turn on or off the Zoho Communication Bar. Example of what I mean by Communication Bar: It's such a pain sometimes when I'm in WorkDrive and I want to share a link to a file with a colleague

    • Introducing Profile Summary: Faster Candidate Insights with Zia

      We’re excited to launch Profile Summary, a powerful new feature in Zoho Recruit that transforms how you review candidate profiles. What used to take minutes of resume scanning can now be assessed in seconds—thanks to Zia. A Quick Example Say you’re hiring

    • Kaizen #190 - Queries in Custom Related Lists

      Hello everyone! Welcome back to another week of Kaizen! This week, we will discuss yet another interesting enhancement to Queries. As you all know, Queries allow you to dynamically retrieve data from CRM as well as third-party services directly within

    • Need the ability to have read only fields on a form.

      There needs to be functionality in Creator that allows a field on a form to be read only. Most screen building software applications have this capability. I know you can hide certain fields from specific users and that you can also make the whole form read only but that's not the functionality I need. I want to be able to create a form where certain fields are editable and other are for display purposes only (read only). For example if the form was displaying information on an item that the user

    • Reverse payment on accidentally closed invoice.

      An invoice was closed accidentally with the full payment added. However, only partial payment was paid. How can I reopen the invoice and reverse this to update it to show partial payment?

    • New integration: Track booking page appointments in Google Analytics 4

      Hello all, Greetings from the Zoho Bookings team! We’re excited to introduce our new Google Analytics 4 (GA4) integration designed to help you track booking activity, understand customer behavior, and measure marketing performance, all in one place. What

    • How to list emails in a folder, e.g. Inbox, on multiple pages when using Zoho mail webpage?

      Something as shown in the figure. There are totally 50 emails in Sent folder. If "Mail per page" equals 20, then the Sent folder is split into 3 pages. When I wander through Sent folder, I can just select a specific page to jump to. BTW, it seems that

    • Zoho Calendar soft bounce on @hotmail.com and @yahoo.com email addresses

      Hello, our Zoho calendar recently does not send the calendar invites to emails with hotmail and yahoo domains and comes back with a "soft bounce". other domains like Gmail works fine. Also sending "email" to the same emails to the above domains work well

    • ERROR CODE :512 - 5.4.4 DNS error:NXDOMAIN.

      Suddenly we cant send mail, we are getting this error for all outbound mail to multiple domains.

    • Can Zoho Flows repeat Actions more than once?

      I'm attempting to make an intentional Zoho Flow loop using the below layout. However, when "WithinLimit" condition is met, the program fails to execute the action "Get & Add Request Co..." again. Is this by design? Is Zoho Flows unable to repeat actions

    • Unveiling Cadences: Redefining CRM interactions with automated sequential follow-ups

      Last modified on 01/04/2024: Cadences is now available for all Zoho CRM users in all data centres (DCs). Note that it was previously an early access feature, available only upon request, and was also known as Cadences Studio. As of April 1, 2024, it's

    • customer data security

      We are exploring ways to enhance our within Zoho CRM. Our Goal: We want to fully integrate RingCentral with Zoho CRM to enable click-to-call functionality for our sales team. However, to comply with data privacy regulations and protect customer contact

    • Zoho Cliq not working on airplanes

      Hi, My team and I have been having this constant issue of cliq not working when connected to an airplane's wifi. Is there a reason for this? We have tried on different Airlines and it doesn't work on any of them. We need assistance here since we are constantly

    • Sync CRM inventory data with Zoho Books

      I just switched everything over to ZoHo books, but I am trying to find out why the CRM Estimates, Invoices, and Sales Orders created in ZoHo CRM are not then duplicated in ZoHo Books? I had Quickbooks before, and had to do everything twice, I thought

    • mask Customer phone number and agents cant see customer phone number

      Is there any way we can integrate Zoom Phone with Zoho CRM while ensuring that customer phone numbers remain masked? We need a solution where agents can make outbound calls but cannot see customer phone numbers. Please let us know if there is any solution

    • Email Reminders on Shared Calendars

      How do we turn off the setting that emails reminders to everyone who has accepted or declined a calendar invite? If 8 of us have been invited to the same meeting, we receive 8 notifications for every step of the process, from invitation to decision.

    • Default Sorting on Related Lists

      Is it possible to set the default sorting options on the related lists. For example on the Contact Details view I have related lists for activities, emails, products cases, notes etc... currently: Activities 'created date' newest first Emails - 'created

    • WebDAV / FTP / SFTP protocols for syncing

      I believe the Zoho for Desktop app is built using a proprietary protocol. For the growing number of people using services such as odrive to sync multiple accounts from various providers (Google, Dropbox, Box, OneDrive, etc.) it would be really helpful if you implemented standard protocols such as WebDAV / FTP / SFTP so that alternative inc clients can be used.

    • What's New in Zoho Inventory | Q2 2025

      Hello Customers, The second quarter have been exciting months for Zoho Inventory! We’ve introduced impactful new features and enhancements to help you manage inventory operations with even greater precision and control. While we have many more exciting

    • How to refresh a ticket view ?

      I am doing a widget where I send a rest api call to make a new draft to the ticket I am viewing. The issue is sometimes it refresh a ticket view and I can see inserted draft right away, but sometimes I do not see it even if it is inserted correctly and

    • Ugh! - Text Box (Single Line) Not Enough - Text Box (Multi-line) Unavailable in PDF!

      I provide services, I do not sell items. In each estimate I send I provide a customized job description. A two or three sentence summary of the job to be performed. I need to be able to include this job description on each estimate I send as it's a critical

    • Merge Items

      Is there a work around for merging items? We currently have three names for one item, all have had a transaction associated so there is no deleting (just deactivating, which doesn't really help. It still appears so people are continuing to use it). I also can't assign inventory tracking to items used in past transactions, which I don't understand, this is an important feature moving forward.. It would be nice to merge into one item and be able to track inventory. Let me know if this is possible.

    • Supervisor Rules - Zoho Desk

      Hi, I have set up a Supervisor Rule in Zoho Desk to send an email alert when a ticket has been on hold for 48 hours. Is there a way to change it so that the alert only sends once and not on an hourly basis? Thank you Laura

    • ResponseCode 421, 4.7.0 [TSS04] Messages from 136.143.188.51 temporarily deferred due to user complaints

      Had email bounce. Let me know if you can fix this. Thanks. Michael

    • Zoho Canvas - Custom templates for related lists

      Hi, I see that the example pages load always one of our related lists in a custom template, but I dont know how to work with that:  1) How can i make my own custom templates for related lists?  2) Where and how can i check out existing custom templates?

    • Automation #15: Automatically Adding Static Secondary Contacts

      Rockel is a top-tier client of Zylker traders. Marcus handles communications with Rockel and would like to add Terence, the CTO of Zylker traders to the email conversations. In this case, the emails coming from user address rockel.com should have Terence

    • New Zoho triggers Google Dangerous flag due toabnormal charcters

      Just signed up and doing my first email test. I sent it to my google email account but it got flagged as Dangerous" due abnormal characters. My DNS setup looks ok. Page snips attached Help Please Thanks, Rick DC PowerWorld

    • Is there a API to fetch tasks in a Board/Section

      I am writing a scheduled function that retrieves all the tasks and send an reminder on cliq. I cannot seem to find a API to fetch tasks (by user / board / section) What are the way to fetch tasks?

    • Having trouble fetching contents of Zoho Connect Feeds using the API, requesting alternative API documentation.

      I'm trying to retrieve feed/post data from Zoho Connect using the API but facing challenges with the current documentation. What I've tried: OAuth authentication is working correctly (getting 200 OK responses) Tested multiple endpoints: /pulse/nativeapi/v2/feeds,

    • Adding an Account Name to Tasks/Reminders

      Does anyone know how to add the related account name to a task?  When we look at the list of activities and when the reminders pop up, there is no way of quickly seeing who the account is. 

    • Triggering Zoho Flow on Workdrive File Label

      Right now Im trying to have a zoho flow trigger on the labeling/classification of a file in a folder. Looking at the trigger options they arent great for something like this. File event occurred is probably the most applicable, but the events it has arent

    • SendMail to multiple recipients

      Hi, I'm trying to send an email to a list of recipients.  Right now the "to" field is directed to a string variable. (List variables won't work here). In the string variable, how can I make it work? trying "user@app.com;user2@app.com" or "user@app.com; user2@app.com" just failed to send the emails. Ravid

    • Populate drop down field from another form's subform

      Hello, I found how to do that, but not in case of a subform. I have a Product form that has a subform for unit and prices. A product might have more than one unit. For example, the product "Brocoli" can be sold in unit at 3$ or in box of 10 at 25 $. Both

    • Usar o Inventory ou módulo customizado no CRM para Gestão de Estoque ?

      Minha maior dor hoje em usar o zoho é a gestão do meu estoque. Sou uma empresa de varejo e essa gestão é fundamental pra mim. Obviamente preciso que esse estoque seja visível no CRM, Inicialmente fiz através de módulos personalizados no próprio Zoho CRM,

    • Signup forms behaviour : Same email & multiple submissions

      My use case is that I have a signup form (FormA) that I use in several places on my website, with a hidden field so I can see where the contact has been made from. I also have a couple of other signup forms (FormB and FormC) that slight differences. All

    • getting error in project users api

      Hello, I'm getting a "Given URL is wrong" error when trying to use the Zoho Projects V3 API endpoint for adding users to a project. The URL I'm using is https://projectsapi.zoho.com/api/v3/portal/{portalid}/projects/{projectid}/projectusers/ and it's

    • Change total display format in weekly time logs

      Hi! Would it be possible to display the total of the value entered in the weekly time log in the same format that the user input? This could be an option in the general settings -> display daily timesheet total in XX.XX format or XX:XX.

    • Next Page