Auparavant, l'automatisation dans les modèles de fusion de Writer se limitait à des actions simples comme « fusionner et stocker », « fusionner et envoyer par e-mail » ou « fusionner et envoyer pour signature ». En revanche, il était jusqu’à présent impossible de combiner plusieurs modèles dans un seul document, de choisir un modèle selon des critères précis, ou encore d’envoyer plusieurs fichiers en pièce jointe d’un même e-mail.Le nouveau concepteur de flux d'automatisation change la donne. Grâce à son approche intuitive et sans code, il permet de gérer facilement des scénarios complexes.
Vous pouvez désormais réaliser des actions avancées, telles que marquer un document comme final, le fusionner avec un autre, ou le convertir en PDF ou en feuille de calcul — tout en préservant les paramètres du modèle.Il est aussi possible de déplacer les documents dans des dossiers spécifiques, de mettre en pause une collaboration, de résoudre les commentaires, etc.
Comment utiliser le concepteur de workflows d'automatisation
Il propose une interface intuitive en glisser-déposer permettant d’organiser des cartes d’action, de définir la logique du flux via des connexions, et de configurer chaque action selon vos besoins. Par exemple, vous pouvez utiliser des cartes pour sélectionner des modèles et définir des règles afin de diriger automatiquement le flux selon différents scénarios.
Il vous suffit de faire glisser les cartes souhaitées sur le canvas, de les organiser en groupes, et de créer ainsi des flux de travail complets et cohérents, sans effort.
Découvrons maintenant quelques cas d’usage concrets en entreprise pour mieux comprendre les avantages de ce concepteur de flux.
1. Adapter le mode de distribution en fonction des conditions
Contexte : une fondation doit envoyer des reçus de dons à ses donateurs.
Problème : certains donateurs ont une adresse e-mail, d’autres non.
Solution : les reçus sont envoyés par e-mail aux donateurs qui disposent d’une adresse électronique. Les autres doivent venir retirer leur reçu imprimé au bureau.
Fonctionnement avec le concepteur de flux d’automatisation
- Déclenchement : l’automatisation démarre dès que les reçus sont prêts.
- Création des reçus : un reçu personnalisé est généré pour chaque donateur.
- Filtrage : la carte "Filtrer les données" sépare les donateurs en deux groupes, selon la présence d’une adresse e-mail :
- Port 1 : avec adresse e-mail
- Port par défaut : sans adresse e-mail
- Distribution :
- Les reçus des donateurs avec adresse e-mail sont envoyés automatiquement par mail.
- Pour les autres, un webhook prévient l’équipe chargée d’imprimer et de conserver les reçus pour remise en main propre.
2. Choix automatisé du modèle de document selon le filtrage des données
Contexte : un cabinet d’avocats propose trois services : conseil, contentieux et consultation, et doit générer le contrat correspondant à chaque service.
Problème : différents modèles existent, et il faut automatiquement utiliser le bon modèle selon le service sélectionné par le client.
Solution : grâce aux cartes de filtrage du concepteur d’automatisation, vous pouvez définir des règles pour choisir automatiquement le modèle adéquat.
Fonctionnement : l’automatisation démarre dès que le client choisit un service et valide le formulaire.
La carte Filtrer les données examine le type de service choisi et génère le contrat à partir du modèle correspondant :
- Consultation → modèle Consultation
- Conseil → modèle Services de conseil
- Contentieux → modèle Engagement contentieux
Le contrat généré est ensuite envoyé par e-mail au client.
3. Générer automatiquement plusieurs contrats selon les services sélectionnés
Contexte : le cabinet d’avocats permet désormais à ses clients de sélectionner plusieurs services juridiques simultanément (ex. : conseil, contentieux, consultation). Il faut donc générer un contrat pour chaque service sélectionné.
Problème : lorsque les clients ne pouvaient choisir qu’un seul service, il suffisait de filtrer les données et d’utiliser un modèle unique. Avec des choix multiples, le nombre de combinaisons possibles rend les flux complexes à configurer et à maintenir. Par ailleurs, l’ajout de nouveaux services nécessite de modifier les conditions existantes.
Solution : grâce à la carte de routage, chaque service est traité indépendamment. Le système détecte automatiquement tous les services sélectionnés et génère les contrats correspondants via des chemins distincts.
Fonctionnement :
- Le flux est déclenché à la soumission du formulaire par le client.
- La carte de routage vérifie les services sélectionnés.
- Le système génère tous les contrats correspondants (1, 2 ou 3 modèles selon le cas).
Tous les contrats générés sont envoyés par e-mail au client.
Gérer vos workflows devient plus simple avec le nouveau concepteur :
- Vous disposez d'une vision globale pour mieux comprendre et maîtriser chaque étape du flux.
- Vous pouvez insérer de nouvelles actions ou ajuster des conditions à tout moment, sans devoir reconstruire l’ensemble, ce qui rend l’évolution du workflow fluide et flexible.
Prêt à dynamiser vos workflows d’automatisation ?
Découvrez les fonctionnalités avancées de fusion de documents proposées par Zoho Writer.
N’hésitez pas à nous faire part de vos commentaires, et consultez notre
guide complet pour une prise en main détaillée.
L'équipe Zoho France
Recent Topics
5名限定 課題解決型ワークショップイベント Zoho ワークアウト開催のお知らせ (10/31)
ユーザーの皆さま、こんにちは。Zoho ユーザーコミュニティチームの中野です。 10月開催のZoho ワークアウトについてお知らせします。 今回はZoomにて、オンライン開催します。 参加登録はこちら(無料):https://us02web.zoom.us/meeting/register/BGYTysOnSqa9LA9eY2IKww ━━━━━━━━━━━━━━━━━━━━━━━━ Zoho ワークアウトとは? Zoho ユーザー同士で交流しながら、サービスに関する疑問や不明点の解消を目的とした
Subforms in Stateless Forms
Stateless Forms are very useful, but we can't build complex data entry pages without Subforms. Can this be implemented? This would make Stateless Forms truly powerful.
Custom Function not getting package details when triggered from Workflow Rules.
I have a custom function for Packages that submits a form in our Creator app that we use to generate custom shipping labels (internal staff complete deliveries so we cannot generate shipping labels straight from Inventory). When the function is executed
Billing Preferences per Account
Hello, We are trying to setup Billing Preferences in Zoho Desk to set up a different pricing per account. We charge different pricing per hour per customer/account. Account A = 100 per hour Account B = 125 per hour In the Billing Preferences in Time Entry
Time entry preview for custom time entry templates.
Our company needed time entries in a specific format to document our client interactions. Since we are using a custom time entry layout, we have lost the "preview" on the time entry tab. Using the default time entry layout, you get a small preview of
Able to change project on timelog entries
Ability to move the timesheet entry from one project to another. When a user adds a wrong entry a manager can change/update the timesheet entry to the correct project.
Knowledge base: The nitty-gritty of SEO tags
A well-optimized knowledge base with great SEO can benefit your company by allowing customers to find help articles and support resources using search engines. This enables customers to quickly and efficiently find the information they need without direct
Full Text Customization & Translation in SalesIQ Chat Widget Settings
Dear Zoho SalesIQ Team, Greetings, We would like to request an important enhancement to the chat widget customization options in Zoho SalesIQ. Current Limitation: At the moment, only some of the text shown in the chat widget is editable or translatable
Introducing swipe actions in the Zoho CRM Android app
Hello everyone, How much time do you spend each day on your list view? Probably quite a lot. Since it's such an important part of your work, wouldn't it be easier if you could take action directly from your list view instead of opening each record one
Content Security Policy
Is there a place in ZOHO CRM to add a Content Security Policy to allow for a call to a google.com map, from inside our current app? Or, how do I resolve the issue below?? jquery.js:1 Refused to load the script 'https://maps.google.com/maps/api/js?v=3.41&libraries=places&sensor=true&key=AIzaSyAyQzKeKSbLci4LwZhn9oXvtCkbUo1Ae4g&callback=map_loader'
Option to select location?
As a business coach, I meet with clients at various public locations. I have two or three pre-determined locations that I meet at. I would like the client to choose the location when booking an appointment. Is there a way to do that with a single service, or is the best way to accomplish this by creating one service for each location offered?
Unified WhatsApp Number Management in Zoho Desk and SalesIQ
Dear Zoho Desk Support Team, We are currently utilizing both Zoho Desk and Zoho SalesIQ for our customer support operations. While both platforms offer WhatsApp integration, we are facing challenges due to the requirement of separate WhatsApp numbers
Provide a standard structure to your content using article templates
Hello everyone, When multiple writers work on different documents, maintaining a standard structure can be challenging as each of the writer follows a different writing style. However, when the structure, tone, and format of every document is different,
Accessibility Spotlight Series - 1
Every user interacts with products differently, what feels intuitive to one may be challenging for another. Addressing this, accessibility is built into Zoho Project's design philosophy. This helps users navigate and perform actions with ease irrespective
Projects Tasks Not Showing Dependencies
I'm clicking on tasks and the popup to add dependencies isn't showing. I can't disconnect the nodes either. For some reason when I slide a task backwards it says it cannot go before a predecessor, even though there is not predecessor. Double clicking
Deprecation of C4 endpoint URLs
Note: This post is only for users who are still using the C4 endpoints. Hello everyone, At Zoho Creator, we're committed to continuously enhancing the security, performance, and capabilities of our platform. As part of this ongoing effort, we'll be deprecating
Introducing AWS authentication for connections in Deluge
Hello everyone, We're incredibly excited to announce the all-new AWS authentication for connections in Deluge! This highly anticipated feature simplifies connecting to Amazon Web Services, opening up a world of possibilities and allowing you to seamlessly
Timeline Tracking Support for records updates via module import and bulk write api
Note: This update is currently available in Early Access and will soon be rolled out across all data centers (DCs) and for all editions of Zoho CRM. The update will be available to all users within your organization, regardless of their profiles or roles.
Customize User Invites with Invitation Templates
Invitation Templates help streamline the invitation process by allowing users to create customized email formats instead of sending a one-size-fits-all email. Different invitation templates can be created for portal users and client users to align with
ListObjects is recognized by VBA
Sub addNewRow() Dim ws As Worksheet ' Set your worksheet name Set ws = ThisWorkbook.Sheets("Invoice") ' Set your table name (change "Table1" to your actual table name) ws.ListObjects("InvItems").ListRows.Add End Sub I am getting Unknown function: Li
KPI Widget dashboard select periods
I have a problem with selecting periods as a user filter. In the beste scenario I would like to have to have a period filter like Google Analytics has of Datastudio (see attachment). In the KPI widget I "Group by "inquiry_date" on week&Year". It selects
Need a way to secure Prefill URLs in Zoho Forms (hide or encrypt prefilled values)
Hi everyone, I often use Zoho Forms with prefilled URLs to simplify the user experience — for example: https://forms.zohopublic.com/.../form?Name=David&Amount=300 However, the problem is that all prefilled values are visible and editable in the link.
Can’t send emails from Zoho CRM after adding a new user — verification codes not received
Hi everyone, We recently added a new user to our Zoho CRM account and purchased an additional license. Since then, we haven’t been able to send any emails from Zoho CRM. Our Zoho Mail accounts are working perfectly, we can send and receive emails directly
CRM for email in Outlook: how to ignore addresses?
We’re using the "Zoho CRM for email" add-in for Outlook. When opening an email, the add-in displays all email addresses from the message and allows me to add them to the CRM or shows if they’re already contacts. However, sometimes people listed in To
Scheduling Calls in CommandCenter / Blueprints
I would love it if you could add a function to schedule a call in the lead's record for a future date. I know you can add a Task by going to Instant Actions > Task and completing the form: These tasks go into the lead's record under Open Actions. But
Quickly send emails and sync conversations with custom email addresses in CRM
Editions: All editions DCs: All DCs Release plan: This enhancement has been released for customers in all DCs except IN and US. We will be enabling it for IN and US DC customers soon. [Update on 22 May 2024] This enhancement has been released for all
Zoho製品と生成AIツールの活用について
いつもありがとうございます。 弊社では、Zoho Oneを契約し、CRMを軸として、見込み客の管理から商談、その後の受注や請求の管理、サポート業務(Desk)、業務データのレポーティング(Analytics)などを行っております。 Zohoサービス自体には、Ziaというツールが搭載されているかと存じますが、それ以外の外部の生成AIツールと連携した活用などもできるのでしょうか?具体的には、CopilotなどがZohoに登録されているデータや情報を見て、対話型で必要なデータを提示してくれたり、商談や蓄積されたメモなどを分析してユーザが知見を得られるような活用ができないか、と考えております。
Work with Contacts who use multiple Emails / Manage obsolete Email addresses without loosing Emails in Context
Hello List Work with Contacts who use multiple Emails Only after 1 week in using Zoho CRM productively we have contacts which randomly use 2 different email addresses. From the concept I've understood that Zoho CRM offers two email fields which are recognized
New Field in CRM Product Module Not Visible in Zoho Creator for Mapping
I created a new single-line field in the Products module in Zoho CRM. Zoho CRM and Zoho Creator are integrated, but the newly created field in CRM is not visible in Zoho Creator when I try to map fields.
Send WhatsApp voice messages from Bigin
Greetings, I hope all of you are doing well. We're happy to announce this enhancement we've made to Bigin. Bigin's WhatsApp integration now supports audio messages, so you can record and send voice messages. This makes it easier to handle customer questions
Microsoft Teams now available as an online meeting provider
Hello everyone, We're pleased to announce that Zoho CRM now supports Microsoft Teams as an online meeting provider—alongside the other providers already available. Admins can enable Microsoft Teams directly from the Preferences tab under the Meetings
I want to subscribe 1 professional user but the email only 250 per day?
When I subscribe 1 professional user, I am only able to send 250 email per day? So less? Or is it typo, 2500 rather than 250? Any sale agent or friends can clear my doubt? Thank You
How to add a % Growth column for year-over-year comparison (2024 vs 2025)
Hello, I am trying to build a monthly revenue comparison between 2024 and 2025 in Zoho CRM Analytics. My current setup is: Module: Deals (Affaires) Filter: Stage = Closed Won Date field: Closing Date Grouping: By Month Metrics: Sum of Amount for 2024,
How do you map a user picklist field to another user picklist field.
In Zoho Projects, I'm trying to map a custom field (user picklist) in Task Details to a field (user picklist) in the Project Details. How do you get the two to map to each other? This is what I currently have that works for my other fields but doesn't
Explore Competitive 3D Scanner Prices at Protomont Technologies
The genesis of Protomont Technologies emerged from the collaborative efforts of the founders in 2019, both the founders shoulder an enormous experience in the world of 3D Printing. Protomont Technology aims to craft your vision with creativity, empowering
New and improved API resources for Zoho Sign Developers
Hello, Developers community! We know that for you, an API's real value depends on how quickly, easily, and reliably you can integrate the it with your application. That's why we're excited to talk about the recent improvements to our developer resources,
Project Approval Process Workflow
Issue: When a new Project is created, there is lack of process/workflow that provides their manager a process to approve or review. Suggestion/Idea: Similar to “Workflow”, we need “Workflow” ability at Project level, where based on the criteria of the
Marketing Tip #5: Improve store speed with optimized images
Slow-loading websites can turn visitors away. One of the biggest culprits? Large, uncompressed images. By optimizing your images, your store loads faster and creates a smoother shopping experience leading to higher sales. It also indirectly improves SEO.
Why can I not choose Unearned Revenue as an account on items?
Hello, I do not understand why we don't have the ability to code an item to unearned revenue. It is not an uncommon situation to have in business. I understand that there is the Retainer invoice as an option, however that doesn't really work for us. Our
Form Submission Emails
Is there a current delay with submission emails being sent? We've had 10-20 forms completed today but only a handful of emails.
Next Page