New to Campaigns? Some common early mistakes that might occur

New to Campaigns? Some common early mistakes that might occur

Hello Marketers,
Welcome back to another post in Marketer's Space.
If you're just getting started with Zoho Campaigns, things can feel exciting and slightly confusing at the same time. You're not alone. Most early frustrations come from setup gaps rather than product issues.

Looking at all the features in the product, many new users tend to run into the same few roadblocks. In this post, we'll breakdown what usually causes trouble (and how to avoid it). Whether you're just setting up your first campaign or refining your existing process, this post will help you build a strong foundation early.

Skipping domain authentication   

Many users start sending campaigns before setting up SPF and DKIM properly. Here's what happens when they skip it:
  1. Emails are visibly sent from "via zcsend.net".
  2. They encounter lower inbox placement.
  3. They result in trust issues in Gmail or Outlook.
Domain authentication isn't optional if you care about deliverability; it should be step one.

What can you do instead?
  1. Add and verify your sending domain inside Zoho Campaigns before launching your first campaign.
  2. Configure SPF and DKIM records in your domain's DNS settings.
  3. Wait for verification confirmation before sending in bulk.
  4. Run a small test campaign after setup to confirm proper alignment.
Authentication issues don't just affect inbox placement; they can also prevent campaigns from going out altogether.

Campaign moves back to draft after sending   

This often happens because one of the final checks fails—like sender verification, mandatory fields, or authentication settings.
Before clicking send, ensure the following:
  1. Your sender email is verified.
  2. Authentication (SPF/DKIM) is properly configured.
  3. You've reviewed the campaign checklist inside the editor carefully.
Most "failure to send" cases are configuration-related, not system errors.

Uploading large or unclean contact lists without preparation   

Many new users decide to import a large database and send a campaign immediately. Others upload lists that haven't been cleaned in months or years. Both situations can quietly hurt performance.
Common issues include:
  1. Importing thousands of old or inactive contacts at once
  2. Sending to contacts who haven't engaged in a long time
  3. Including duplicate entries
  4. Not removing bounced or inactive addresses
What does this lead to?
  1. Low open and click rates
  2. Higher bounce rates
  3. Increased spam complaints
  4. Poor sender reputation
For new accounts especially, this can impact deliverability very quickly.
A better way to approach this is to do the following:
  1. Start with your most engaged contacts.
  2. Gradually increase volume over time.
  3. Remove duplicates and inactive addresses.
  4. Segment your contacts based on engagement before sending.
Good deliverability isn't just about authentication; it's also about list hygiene and sending behavior.

Open rates show zero (especially in Gmail)

Open tracking depends on images being loaded. If the recipient's email client blocks images by default, if privacy protection is enabled (especially on Apple devices), or if images are preloaded differently, the open may not register.
This is common with:
  1. Gmail (especially with image blocking)
  2. Privacy-focused email settings
  3. Apple Mail privacy protection
A sudden drop in open rate doesn't always mean your emails aren't being read.
So what is the fix?
  1. Send internal test emails to see if tracking pixels are functioning.
  2. Use A/B tests to validate subject line performance rather than judging from one send.
  3. Compare trends over a period of time instead judging from one campaign.
Your open rate should be treated as an indicator, not as an exact measurement—because it isn't.

Automation doesn't trigger for everyone   

A common assumption is that once automation is active, it applies to all contacts, and users forget that building automations without testing entry conditions might never yield expected results.
A workflow may look correct, but in reality:
  1. Contacts must meet the trigger conditions.
  2. They must enter the workflow at the correct stage.
  3. Timing filters and status settings matter
This is usually a logic issue, not a bug. So how can you solve it?
  1. Test the workflow using a sample contact before activating it fully.
  2. Double-check entry criteria and filter rules.
  3. Review contact status and segmentation settings.
  4. Use the workflow report to confirm whether contacts entered the automation.

Not testing across devices and email services 

Emails that look perfect in the Zoho Campaigns editor may:
  1. Break in emails formatting/structure.
  2. Stack oddly on mobile displays.
  3. Misalign buttons.
The clear action is to first find out how your email looks via the Preview and Test mode, after which you can always send those test emails from the same section and see the actual results.
You can send such emails to:
  1. Gmail
  2. Outlook
  3. Mobile devices


The editor preview is not a perfectly accurate reflection of the real inbox view, so we always recommend that you test your email campaigns first across different devices and email services before sending them in bulk.

Ignoring spam score or content red flags 

The actual content of your email plays a major role in where it lands.
Common content-related mistakes include:
  1. Using heavy promotional language like "BUY NOW," "LIMITED OFFER," or excessive exclamation marks
  2. Writing subject lines that feel overly aggressive or misleading
  3. Including too many links in a short email
  4. Using shortened URLs
  5. Designing image-only emails with very little supporting text
  6. Embedding large attachments directly in the campaign
Another common oversight is not checking the spam score before sending. Even if the content feels fine, running it through the built-in checks helps identify structural red flags early.
Here's a better approach:
  1. Maintain a healthy balance between text and images.
  2. Keep links purposeful and minimal.
  3. Avoid excessive capitalization and exaggerated claims.
  4. Write subject lines that are clear rather than sensational.
  5. Test-send and review how the email appears in different inboxes.
Sending successful campaigns is all about earning inbox trust through clean structure and responsible messaging.

If you're just starting out, take your time with the setup. A well-configured account will always outperform a rushed campaign.

If you've already encountered one or more of these issues, you're not alone; they're all part of the learning curve. Feel free to share your experiences or additional insights in the comments below. Your input might help another marketer avoid the same roadblock.

Until next time, happy campaigning!

Regards,
Yashwanth S
User Education
Zoho Campaigns Team

    • Recent Topics

    • The improved portal experience: Introducing the template view for inventory modules, enhanced configurations, and PDF export support

      Availability: Open for all DCs. Editions: All Hello everyone, You can now achieve a seamless, brand-aligned portal experience with our enhanced configuration options and the new template view for inventory modules. Your clients will now be able to view

    • Zoho Analytics Bulk Api Import json Data

      HI, I’m trying to bulk-update rows in Zoho Analytics, and below are the request and response details. I’d like to understand the required parameters for constructing a bulk API request to import or update data in a table using Deluge. Any guidance on

    • Project Management Bulletin: December, 2025

      The holiday cheer is in the air and it’s time to reflect on the year that was. At Zoho PM Suite, we've been working behind the scenes on something huge and exciting all year and now we are almost ready—with just a bit of confetti—for our grand release

    • Inventory batch details

      Hi there, I'm trying to get the batch details of an item, here's what I've done so far. I've sent cUrl request to the below endpoint and I get a successful response. Within in the response I find the "warehouses" property which correctly lists all the

    • Auto check out after shift complete

      i'm just stuck here right now, i wanna know how to do this thing, now tell me, how can i configure a custom function that runs after complete shift time if employee forget to check-out ?

    • How to create a flow that creates tickets automaticaly everyday based on specific times

      Hi guys Does anyone know how to create a flow that will create tickets automaticaly in ZOHO Desk when a certain time is reached. Im havin a hard time configuring a flow that will create tickets automaticaly everyday during specific hours of the day For

    • ZOHO FLOW - ZOHO CREATOR - ZOHO WRITER : Get Related records

      Bonjour, J'ai besoin que vous m'ajoutiez la solution "Get related Records" dans la liste de choix de zoho creator (sous Zoho flow). En effet, j'ai besoin de récupérer les champs d'un sous formulaire pour l'ajouter à l'impression de mon document. Mer

    • Will zoho thrive be integrated with Zoho Books?

      title

    • Connecting email for each department in ZohoDesk

      Hi! Could someone help me to go through connecting emails for each department?

    • How do I trigger a Flow based on a campaign response?

      Is there a way to trgiider a Zoho Flow based upon a lead opening an email sent via Zoho Campaigns? I see that the data is recorded in the 'Campaigns' section of Zoho CRM under 'Member Status' and I want to trgigger a flow based upon that record changing.

    • All Zoho Flows are filtered

      My two flows operate perfectly when I run them as a test, but when they're activated each run ends with a status of neither success, nor fail, but filtered. I haven't set up any filters. I don't see where to turn off filters. When I test run on a sequence

    • Creating Multiple Items on Sales Order

      Hi, I’m trying to automate some processes using Zoho Flow, specifically the creation of sales orders in my Zoho Inventory. However, Zoho Flow's Create Sales Order function can only add one item. I would like to include multiple items in a single sales

    • Problem Connection from Zoho Flow and Gravity Form

      I obtained my API key from Gravity Forms via WordPress. However, when I enter my Zoho Flow, it states: Gravity Forms says, 'You are not authorised to access the API." I tried recreating a new API key, but it is still not working.

    • Eventbrite Email Field in Zoho Flow Returns "Info Requested" Instead of Actual Email

      Hi Zoho team, I'm using Zoho Flow to connect Eventbrite with Zoho CRM. My goal is to automatically add event attendees as leads in Zoho CRM. I’ve set up the flow and mapped the ${trigger.profile_email}} field to the Email field in CRM. However, I'm running

    • "Invalid value passed for Product ID" Error in Zoho Flow "Create Sales Order" Node

      Hello Zoho Community, I’m facing an issue with Zoho Flow while trying to create a sales order in Zoho Inventory using the "Create Sales Order" node. Here’s a detailed explanation of my setup and the problem: What I’m Trying to Achieve I’m building an

    • Associating Project with an Account via Flow

      I'm using flow to create a Project based on a Deal status update using flow. The fields exist to pass the Account Name through properly, but when you view the Projects module in a CRM Account Record it doesn't automatically associate the new Project Record

    • How to follow up a member in a meeting?

      Hello, I make weekly meeting online with a lot of people. I want(I've been using calendly to do it). I want to do a follow-up to it. I want to send messages via Zoho-flow to all the member that participated in the meeting. How can I do it?

    • Setting Delays in Invoice Reminder Flow

      I am currently working on a flow that sends reminders for unpaid invoices. The flow is designed to delay actions until specific intervals before the due date: A reminder should be sent 7 days before the due date. A second reminder should be sent 3 days

    • Get Sales Orders Related to Inventory Item

      Dear Team, I'm just wondering if there is a way to get a list of all Sales Orders related to a specific Inventory Item. I did search all articles but couldn't find any article that could help.

    • Endpoint Central Cloud Asset Update from Fresh Service

      All, Does anyone use the asset management feature in Fresh Service? I'd like some help on building a flow to update asset attributes in Endpoint Central Cloud based off of an update to that same asset in Fresh Service. The trigger is "asset is updated"

    • Zoho Flow Export to Deluge

      It would be great to take a user built zoho flow and export the entire flow as a deluge script including having multiple connected applications (showing the API connections and webhooks) and different functionality in the other applications interacting

    • Action Iteration/Loop using Zoho Flow

      Trying to use Zoho Flow for automating following Context - A zoho form entry which has image upload field with upto 5 images setting and files are saved into Workdrive. After form is submitted need to create folder based on some fields and move files

    • Zoho Flow - Unable to evaluate formatDate with Zoho Invoice Date Field for Calendar Integration

      Hello Community, I'm trying to automate the creation of all-day events in Zoho Calendar whenever a new invoice is created in Zoho Invoice. I'm using Zoho Flow for this automation. My Goal: When an invoice is created with a specific "Event Date," I want

    • Zoho Inventory Sales Order Items

      I'm trying to build automation using Zoho Flow to add items to a Sales Order. In the automation options for both "create sales order" and "update sales order", The item ID is required. However, when I update the Sales Order, it's just replacing the item

    • Permissions for Azure Devops connection

      I am trying to set up a connection with our Azure DevOps org but it keeps giving me this error. On Azure I should be able to have admin-level access to everything. Can you please point me to which permission this is checking for so I can enable it?

    • My IMAP mail suddenly stopped working

      On my iPhone and iPad, IMAP stopped working for my Zoho account with the error "User name or password incorrect" and "Invalid credentials failure" however I was able to access via web with the same credentials. Also stopped working on Apple Mail client.

    • Confused by the distiction between matched and categorized when reconciling a bank statement an how to

      I used to use quickbooks. In quickbooks, it was possible to use the check writing feature to add an expense that was on the bank statement that did not go through the AP and check writing process. I would write a check, assign it a number like etf (for

    • Not Receiving OTP • https://voters.eci.gov.in/home/family

      Hello Customer, Greetings from Zoho Mail. Upon a detailed review of our delivery logs, we can confirm that other Zoho Mail users are successfully receiving OTP emails from eci.gov.in. However, in your specific case, it appears that the OTP emails are

    • WorkDrive for Excel Add on

      Dear Sir/Madam Have installed Workdrive for Microsoft add on But unable to view the same added in Excel

    • Splitting Transactions in Zoho Books

      I have read in past forum posts that the ability to split bank transactions would likely be implemented - it's definitely a typical accounting program feature.  I'm new to Zoho and thought I'd found nirvana until I realized this feature doesn't seem to

    • Zoho Calendar s’enrichit avec une intégration à Zoho People et Zoho Cliq

      Les journées de travail ne se déroulent jamais exactement comme prévu. Une conversation informelle devient une séance d’échange d'idées, une absence modifie un planning, et votre agenda se retrouve vite décalé par rapport à la réalité. Chez Zoho Calendar,

    • Holidays

      Hi; For defining Holidays, you need to add logic to handle the year as well as the month & day. We need to be able to enter Holidays for the next year. I need to add a holiday for January 2, 2017, but I can't until January 1st, which is a Sunday and we

    • Zoho public comments are confusing and unnecessary

      Hi, we use zoho desk and have issues with public comments. We started using them because the "Reply" option just seemed very clumsy because of the following reasons: - the top "Reply" button starts what seems to be a regular email, showing the entire

    • Zoho API - ticket creation - Validation failed for the condition : Ticket Status Info should not be empty

      Hi ! I'm trying to create ticket through Zoho API, and I'm getting a 422 response : "Validation failed for the condition : Ticket Status Info should not be empty" My request looks like this : curl --location 'https://desk.zoho.eu/api/v1/tickets' \ --header

    • Deleting unwanted ticket replies

      Hello, In a Zoho Desk Ticket thread, sometimes one of the recipients has auto-reply activated. This creates a new message in the Ticket thread that not only pollutes the thread, but most importantly cannot be replied properly because usually auto-reply e-mails don't do "reply all", so the other recipients are not included. I want to delete such a message in the Ticket thread. I searched the help of Zoho Desk, but only found a way to mark as Spam (https://help.zoho.com/portal/kb/articles/marking-support-tickets-as-spam)

    • System-generated support email added in CC on “Reply All”

      Hi, I recently set up Zoho Desk for a client and we are trying to prevent the Zoho Desk system-generated support email address (not the mailbox used as the department’s "From address") from being automatically added in CC when agents use “Reply All” on

    • Convenience Fees

      I use Zoho Invoice for invoicing my billboard customers.  I have a few customers that want to pay using credit cards and ACH.  As a result, I have integrated an Online Payment Gateway (Stripe) for these customers.  I currently charge these customers a "Convenience Fee" of 3% for using this service as I typically only take checks as payment (and the gateway charges 2.9% + $0.30 per transaction).  I do this by creating a separate line item on the invoice and adding 3% to it.  I would like to offer

    • HTML Tags added to Reports with Notes

      Recently Zoho added the ability to markup text within notes. That way, users can change font size, colors, etc. It's a great change. However, since the change, reports that include a column for "Note Content" are printing HTML tags within the report.

    • Restrict Payment Methods

      Allow us to restrict certain payment methods specific for each customer.

    • Emails Getting Delay Error Messages - Status: 451

      Hi. Hoping someone can help. I've been using Zoho for over a year now with no problems at all. Today, the majority of my emails I send out or reply to are getting this error: This message was created automatically by mail delivery system. THIS IS A WARNING MESSAGE ONLY. YOU DO NOT NEED TO RESEND YOUR MESSAGE. The original message was received at Sun, 22 Dec 2019 18:20:19 -0800 from wazza@amninjas.com [wazza@amninjas.com] ----- The following addresses had fatal errors ----- [Status: ERROR, Address:

    • Next Page