Custom Function to Format Phone / Mobile numbers in Australian Standard format

Custom Function to Format Phone / Mobile numbers in Australian Standard format

So I got sick of phone numbers being formatted incorrectly and Zoho not doing anything to standardise phone numbers to meet E.164 formats. So I went and coded my own function to fix this.
And figured I'd share with the community

This is specifically for Australian numbers. 

The CF will take all mobile, local landline, 1800 & 1300 numbers and format them into the format we are used to in Australia.
It will also add the country code +61 to the prefix so you can call directly from the CRM.

It works with all 10 digit numbers (0400 000 000 or 03 9000 0000)
And with all 9 digit numbers (400 000 000 or 3 9000 0000)
IE works with both the starting 0 or without the starting 0 (ie 03 9000 1111 or 3 9000 1111)


The numbers will be formatted as below

All mobile numbers    0400111222 --> +61 400 111 222
                                       400111222 --> +61 400 111 222
All local numbers        0390001111 --> +61 3 9000 1111
                                       390001111 --> +61 3 9000 1111
1800 numbers            1800111222 --> +61 1800 111 222
1300 numbers            1300111222 --> +61 1300 111 222

For the local numbers it will work with all states area codes (02, 03, 07, 08)

Anything that isn't the above will be ignored and stay the way it was. IE 131122 will stay like that
As will any numbers that aren't 9 or 10 digits long. (ie +61400111222 wont be formatted with spaces)

**NB I may do a V2 to format numbers that are +61 already but not planning that for a while.

This function is specifically for the Leads module.
It is Phone/Mobile Field agnostic. In that it will take whatever value is in the Phone Field, format it return it to the Phone Field. and what ever is in the Mobile Field, format and return it to Mobile Field.

I did this specifically as we use Phone to be the contacts Primary contact number and Mobile to be their Secondary contact Number.

It should be pretty easy to adapt to Contacts Module or any other module. You only need to change line 1 & 211.


Setting up with Workflow and Triggering the Function:
This applies for CRM
  1. Go to Setup --> Automation --> Workflow Rules --> Create Rule --> Under Module, select Leads --> Give a Rule name and Description (ie Format Phone Numbers Australia) --> Next
  2. When = Select "On a Record action" --> "Create or Edit" --> Next
  3. Condition = In Conditions, choose "All Leads" --> Next.
  4. Instant Actions --> Function --> New Function --> Write your own --> Add a Function name (ie Format_Phone_Numbers_Au), Display Name (ie Format Phone Numbers Australia), Description --> Create
  5. Copy paste the code from below and proceed to save the code.
  6. "Edit the Arguments" --> Key is id, in Param Value type # and choose your fields (ie Leads and Lead Id) the end result should read id = Leads - Lead Id --> Save
  7. Save the Function 
  8. Save the Workflow.


NOTE: there is probably a better more efficient way of achieving this.
So if anyone know a better way to code the above I'd love to hear.

EDIT: I had to upload the code separately due to restrictions in the post lengths.

EDIT 2: now updated to work with brackets (03) 9000 1111 and hyphens 0400-000-000

EDIT 3: updated to work with the country code already added but no + ie 61400111222  


The number formatting will work with the following

All mobile numbers    --> +61 400 111 222
  1. 0400 111 222
  2. 400111222
  3. 0400-111-222
  4. 61400111222
All local numbers  --> +61 3 9000 1111
(works with 02, 03, 07, 08) 
  1. 0390001111                  
  2. 390001111
  3. (03) 9000 1111
  4. (03) 9000-1111
1800 numbers  --> +61 1800 111 222
  1. 1800111222
  2. 1800 111 222
1300 numbers  --> +61 1300 111 222
  1. 1300111222 
  2. 1300 111 222 
​
​
EDIT: May 2025

Theres been some requests about cleaning up existing phone numbers for leads/contacts.

To do this there are a few steps to do.

Step 1 - create a new Custom Function called "Format Phone Numbers Au - mass update"
(or what ever you want to name it)

Use the same code as the single run fuction and add a recurring "loop" section to the start of the code, and a small closing at the end.
The way I have it setup is to use the following opening code before Line 1. 
Line 6 of the below code replaces Line 1 in the full code.

  1. string button.Format_Phone_Numbers_Au_mass_update(String leadIDs)
  2. {
  3. idList = leadIDs.toList("|||");
  4. for each  rec in idList
  5. {
  6. a = zoho.crm.getRecordById("Leads",rec);

Then to close the function replace the final Map (line 208-213) with the following

  1. }
  2. mp = Map();
  3. mp.put("Phone",nph);
  4. mp.put("Mobile",nmob);
  5. update = zoho.crm.updateRecord("Leads",rec,mp);
  6. info mp;
  7. info update;
  8. }
  9. return "Success";
  10. }

This new function will take your selected list of Leads and then "for each Record in the idList will run the function"

Step 2 - Create a Mass Update Button in the List view of the Leads/Contacts Module

Go to Settings > Customizations > Modules and Fields > [Module Tab} > Leads
Then go the the Buttons tab > Create New Botton

Button Name: Phone Numbers Mass Update
Define action: Function
Select Page: In List
Select Position: Mass Action Menu  (preview to see where the botton will be placed)
Configured Function: Select the function you created in the above step

Doing the above will create a new botton in the main list view for the Module. 
To use the button you need to select the entries you want to run the function then click the button.

Step 3 - Create a custom View for your Leads/Contacts so that you have less than 1000 

Zoho CRM Limits mass update functions to run for max of 1000 entries at a time. So if you have 10,000's leads you need to figure out how to narrow your view down to less than 1000 entries.

One way is to create a View with specific criteria like 
Email starts with A - this will show all leads with email address beginning with A
If this is still more than 1000 then figure out how to reduce it further to less than 1000

Step 4 - Select all records
Select the check box of the view at the top of the Column. This will select all records in the current window.
Windows are limted to 100 records, so you need to select all 1000 
You will then see a Blue text option to "Select All records in this view". Click this and all records will be selected.
If you have more than 1000 records in the view you wont be able to do the following step so make sure you've limited the view.

Step 5 - click the Mass Update button

Click the Mass Update Button you created above in Step 2. This will run the fuction for all the entries.
It'll take some time and entries will be added to the execution que. If you are interested you can check the api usage to make sure you keep your usage under the daily limit.

Step 6 - Figure out how to vary your list View for the next batch

Rinse and repeat Step 3-5. 
Figure out how to change the View so you see the next 1000 batch but exclude the ones you have already done.

Step 7 - Finish

Make sure you remove the Button you created in Step 2, otherwise someone will definitily run it in future when you dont want them to.





        • Recent Topics

        • New Menu Layout Feedback

          I'd really like to see the banking item back on the top of the menu. I'm sure part of it is just because that's what I'm accustomed to. However, for a bookkeeping program, I think there's a logic to having banking be on top. Not a giant issue, but something

        • Form Accessibility

          Hi, is there an update on the accessibility standard of Zoho forms? Are the forms WCAG 2.1 AA compliant? 

        • Cannot schedule report delivery

          The only 'send option' available when exporting reports is 'immediately' The option to schedule the report is missing.

        • adding attachment in sendmail script where attachment is in a CRM field

          Hi all, I have a custom field of type 'File Upload' in one of my modules in my CRM. I want to include the file in that field as an attachment to an email - which is done from a button on  the 'Results' module. I have created a script and a button to initiate an email from that module. The Deluge scripting window has allowed me to add arguments for all the fields I need to use except for the one file upload type field. My script currently looks like the below (content of the email omitted). As you

        • [Free Webinar] Learning Table Series - AI-Enhanced Insurance Claim Management in Zoho Creator

          Hello Everyone! We’re excited to invite you to another edition of Learning Table Series, where we showcase how Zoho Creator empowers industries with innovative and automated solutions. Struggling with lengthy claim processes, a lack of visibility into

        • Not sure how to use credits to my account

          Hi I have a $50 credit to my account. I'm just wondering how I can apply that to either a current invoice or to try a new service. Any advice would be great, thanks. Kind Regards Chris

        • Control who sees Timeline and Interactions in Zoho CRM through Profiles

          The feature has been enabled for all DCs (except US, EU, and IN DCs). We will be rolling it out to the other DCs in the upcoming days. Dear All, In a CRM, not all users would require access to the history of a record. For instance, a Marketing Operations

        • Zoho Desk Integration - Add the option to send the estimate from the Zoho Desk Ticket Integration

          Hi, Currently in the Zoho Desk integration, the user is able to create an estimate from a ticket, once the estimate is created the user can see the estimate under the ticket (see screenshot below), but is not able to send that estimate from Zoho Desk.

        • CRM Validation Rules Support Only Single Condition

          Simply put, CRM validation rules support only a single condition for each field on "All Records". You also cannot specify additional validation rules on the same field because it has already been used in an existing validation rule. The ONLY solution

        • Unapproved Leaves are hard to distinguish in Attendance View

          This is a an unapproved leave request It appears in the Attendance view without any visual indicator if its approved or not For a whole day request this might be manageable but for hourly requests it gets very hard to know which are approved, which are

        • Performance Appraisal Probation Period

          Hello All,  Is there any possible way to create an appraisal cycle for new staff members, at the end of probation period? Many thanks!

        • Zoho Creatorの一括操作における処理の同期/非同期について

          現在、Creatorのレポート機能を利用して、複数のレコードに対して一括で処理を実行しようとしていますが、処理の実行順序について確認したいことがあります。 レポート内の複数レコードに一括で処理を実行した際、処理は同期的に行われるのでしょうか？それとも非同期的に行われるのでしょうか？ 【同期処理の場合】 レコード①に対する処理が開始され、終了後にレコード②に対する処理が開始され、最後にレコード③に対する処理が実行されるように、処理が順番に行われる場合。 【非同期処理の場合】 レコード①、レコード②、レコード③の処理が一斉に開始され、それぞれ並行して処理が行われ、全処理が終了する場合。

        • Mail Delivery Failed

          Good morning,   I have just set up an account with 5 users, however each time a message is sent to 1 user a m'mail delivery failed' message is generated. See below.   Any ideas   Thanks   Rob   This message was created automatically by mail delivery software. A message that you sent could not be delivered to one or more of its recipients. This is a permanent error. The following address(es) failed: robb@thesmartgroup.ae mailbox is full: retry timeout exceeded ------ This is a copy of the message,

        • Delete commerce website

          I need to delete a commerce website, but the only option is to click on settings, REQUEST DELETE, choose an urgency notice, add a message....AND THEN nothing, no way to send the request. Why is nothing simple!?!?!  I just want to delete the store.  The

        • Adding external users to Zoho Social under Zoho ONE licence - how to best achieve this

          My client has a small business, and we are looking to implementing Zoho ONE with a single flexible user licence as that is all they really need and offers the best pricing for the range of modules we eventually wish to set them up with, one of which will

        • This mobile number has been marked spam. Please contact support.

          Problem Description: One of our sales agents in our organization is unable to sign in to Zoho Mail. When attempting to log in, the following message appears: This mobile number has been marked as spam. Please contact support at as@zohocorp.com @zohocorp

        • What’s New in Zoho Inventory | April 2025

          Hello users, April has been a big month in Zoho Inventory! We’ve rolled out powerful new features to help you streamline production, optimise stock management, and tailor your workflows. While several updates bring helpful enhancements, three major additions

        • Pass current date to a field using Zoho Flow

          I am trying to generate an invoice automatically once somebody submits a record in Zoho CRM. I get an error in the invoice date. I have entered {{zoho.currentdate}} in the Date field. When I test the flow, I get "Zoho Books says "Invalid value passed

        • API: Mark Sales Order as Open + Custom Status

          Hi, it's possible to create Custom Status (sub-status actually) states for the Sales Order. So you have Open, Void. Then under Open you can have Open, and create one called Order Paid, Order Shipped, etc etc...which is grouped under Open. I can use the

        • Zoho Quartz Screen Recording

          Hello, can we get access to Quartz, please, as a standalone solution? It would be great for creating training videos for current and future staff on how to use Zoho software according to our company requirements. Thank you

        • Tip 26: How to hide the "Submit" button from a form

          Hi everyone, Hope you're staying safe and working from home. We are, too. By now, we at Zoho are all very much accustomed to the new normal—working remotely. Today, we're back with yet another simple but interesting tip--how to hide the Submit button from your forms. In certain scenarios, you may want to hide the submit button from a form until all the fields are filled in.  Use case In this tip, we'll show you how to hide the Submit button while the user is entering data into the form, and then

        • How do I move Notes around within a Group?

          It says here: " You can now sort notes by title (alphabetically), or by date modified and date created. You can even organize your notes by dragging and dropping them into a particular order. To sort your notes, simply go to Settings and tap “Sort By.” Please note: all sort settings will be saved and synced across devices, except for custom sorting. Custom sorting will be device specific."However, I am unable to 'custom sort' in either Notebook for Mac or on the Web. In addition, I can't find the

        • Zoho Sign: need to leave document pending for up to a year, or maybe there's a better way?

          I have zoho one, maybe there's a better way to do this with another service than sending a zoho sign template from zoho crm. At the end of the day this requirement is due to regulations, no matter how dumb it may seem. I'm just looking for a way of getting

        • Separate Items & Services

          Hi, please separate items and services into different categories. Thank you

        • Unable to edit or delete email address

          I signed up for free Zoho today. I usually am pretty good at understanding and configuring things like this, but your interface baffles me, and your online help is cryptic to say the least. I have spent hours just trying to set up a couple of email accounts in Zoho before pointing my domain MX records to Zoho. I solved some other issues on my own, but I can't figure out this latest problem: I have created two email addresses in Zoho. Let's call the first one myname@mydomain.com and the second one

        • Mastering Zia Match Scores | Let's Talk Recruit

          Feeling overwhelmed by hundreds of resumes for every job? You’re not alone! Welcome back to Let’s Talk Recruit, where we break down Zoho Recruit’s features and hiring best practices into simple, actionable insights for recruiters. Imagine having an assistant

        • We are unable to process your request now. Please try again after sometime or contact support@zohoaccounts.com

          I cannot sign up and return the error of we are unable to process your request now. Please try again after sometime or contact support@zohoaccounts.com

        • Multi-currency - What's cooking ?

          Hi,       We have been doing this feature for sometime and we would like to give you some glimpses of it.  Working with Multi Currency :        Multicurrency support gives you the ability to handle business transactions in multiple currencies. You can define a base currency for your organization and add more currencies with exchange rates based on the base currency.  Setup :        From the setup page, you can manage all the currencies supported by your organization.       Currencies page        

        • How to reduce programmatically the image uploaded by user?

          I need a function that will automatically reduce the pixel dimension to 800 x 600 pixels / 180 resolution or (approx. 1.37MB) of image uploaded by user from digital camera, for example, 2271 x 1704 pixels /180 resolution or approx. 11.1MB. After the user selected the image, the function will able to detect if pixels is above 800x600, process the photo (crop/ reduce) and resume upload. Need help...  

        • Dark mode for Zoho Creator / Zoho CRM Code editor

          Hi Team, Is there any plans for Dark mode in Zoho creator / Zoho Crm code editor and development pages in pipeline?

        • Is there a way to make a button scroll down?

          Looking to have a button on a landing page scroll down to another section on the page. Any recomendations outside of coding?

        • ZOHO Android Client

          Hi, I installed the Android app, but it had an issue, so I reinstalled it. I was able to add multiple accounts, but now when I add the next account, it just duplicates the one I already have and will not even allow me to enter the info for another account.

        • I'd like to suggest a feature enhancement for SalesIQ that would greatly improve the user experience across different channels.

          Hello Zoho Team, Current Limitation: When I enable the pre-chat form under Brands > Flow Controls to collect the visitor’s name and email, it gets applied globally across all channels, including WhatsApp, Messenger, and Instagram. This doesn't quite align

        • Enhance Barcode/QR Code scanner with bulk scanning or continuously scanning

          Dear Zoho Creator, As we all know, after each scan, the scanning frame closes. Imagine having 100 items; we would need to tap 100 times and wait roughly 1 second each time for the scanning frame to reopen on mobile web. It's not just about wasting time;

        • Managing Rental Sales in Zoho Inventory

          I am aware that Zoho Inventory is not yet set up to handle rental sales and invoicing. Is anyone using it for rentals anyway? I'd like to hear about how others have found work arounds to manage inventory of rental equipment, rental payments, etc. Th

        • Zoho Flow to Creator 3001 Respoonse

          I have updated my Flows with the new V2 connection to Zoho Creator, but now some Flows do not work. They take in data from a Webhook and are supposed to create a record in Creator, however creator returns a 3001 message along with a failure, but I cannot

        • File Upload to Work Drive While Adding Records in Zoho Creator Application

          Hi I am trying to set a file attachment field in zoho creator form, to enable the user to upload a scanned document from their local pc. The file should be uploaded to zoho workdrive and not to the default zoho creator storage. The file link should be

        • Why not possible to generate?

          Using this https://desk.zoho.com/DeskAPIDocument#TicketCount#TicketCount_Getticketcountbyfield on my ZML script url :"https://desk.zoho.com/api/v1/ticketsCountByFieldValues?departmentId=XXXXXXXXXXX&accountId!=XXXXXXXXX&customField1=cf_country_1:XXXXXX&field=overDue"

        • email

          Hi My crm email is not working, can you check, I have zoho one account.

        • Need option to see Mass Emails & Cadences in Gmail Outbox OR a dedicated Zoho Outbox

          Hi everyone, Right now, when we send 1:1 emails from gmail (with gmail API connected to Zoho CRM), those emails appear both in gmail's sent folder and in Zoho CRM. That works well. But when we send Mass Emails or Cadence emails form Zoho CRM, they are

        • Next Page