Hello Everyone,
We appreciate the engaging discussions during the Ask the Experts 19 session on the Spring Release. It was a pleasure connecting with you. Our team is actively working towards your requests to deliver an improved experience.
In this post, we’re excited to highlight the questions and answers from the sessions, including guidance on configuration setups and tips to optimize efficiency for your business. We’re sharing these discussions to benefit the wider community because together, we can enhance our collective knowledge and continue to deliver exceptional service to our customers.
1. How to optimize Agent Response Time and Agent Performance within Zoho Desk?
To accurately measure Agent Response Time and Agent Performance, set up a Service Level Agreement (SLA) within your Zoho Desk Account and link it to the business hours defined in Zoho Desk.
If your agents work during specific hours, e.g. from 9 AM to 5 PM, ensure you create business hours that match your operational timings and associate these hours with your SLA.
This will ensure that response and resolution times are calculated based on your defined business hours. If business hours are not associated with the SLA, response and resolution times will default to calendar hours(24 hours format).
2. How can AWS Infra be configured with Zoho Desk?
Currently, we don't offer a direct integration with AWS Infra. However, you can utilize Zoho Desk APIs to integrate with AWS Infra, enabling you to perform API calls from your system to Zoho Desk.
3. When a ticket is closed and the customer responds, the ticket status does not change automatically. However, when we manually reopen the ticket, the SLA exceeds the defined time. How to configure the SLA so that it does not trigger again upon reopening?
In this case, you can enable the "Customer reply" option within the SLA configuration. This ensures that when a customer replies to a ticket, the SLA is recalculated based on your defined settings.
If the ticket status does not automatically change when a customer responds, check if the "Fall back to default" option is enabled for Closed status under the Ticket Status configuration. You can find this setting by navigating to Setup > Customization > Layouts and Fields > Ticket Status. This will ensure that whenever a customer replies to a ticket in the Closed status, the ticket automatically reverts to the default status.
4. How to prevent unnecessary emails from being converted into tickets and ensure only designated contacts can create tickets via email?
Utilize the filter option available in the forwarding mailbox. Alternatively, a workflow can be implemented to automatically close tickets originating from unwanted email addresses or domains.
5. How can we integrate the automated customer happiness survey process so that it associates directly with the relevant contact and their respective ticket? How to track these responses within reports?
Go to Setup (S) >> Organization >> Customer Happiness. Enter your rating question and select either "To every outgoing Ticket response" or "When a Ticket is closed" from the Add Rating link. Adjust the settings according to your requirements. When a customer rates a ticket, the rating will be available within the ticket as well as the Contact info box in the Tickets properties. To view reports, access the Customer Happiness Dashboard by navigating to Analytics -> Dashboard -> Customer Happiness Dashboard.
6. How to resolve the error encountered when sending marketing messages through WhatsApp templates? Is there any alternative solution we can implement for this?
We are currently exploring possible options with Meta. Specifically, we are checking if it's feasible to send marketing template messages for multiple tickets or contacts at a time without encountering errors.
7. Is it possible to configure a GC flow for Line channel?
This Spring release unfolds for you to create a GC flow specifically for the Line channel and deploy it.Refer this link for details.
8. What is the best method to generate weekly reports such as "Average closure time," "Average number of replies per thread," and especially "Most common types of categorized emails" to get an overview of Agent performances in Zoho Desk?
You can use our default reports to track metrics like average resolution time or average response time or schedule custom reports based on your requirements.
If you're using the Enterprise edition of Zoho Desk, you can set up a report scheduler to send the generated reports to different recipients on a weekly or monthly basis. These scheduled reports can be emailed directly to you, allowing you to view them from your email or device without needing to log into your Zoho Desk account each time.
9. What is the best way to trigger a workflow rule after a specific elapsed time? For example, trigger a workflow after a ticket has been closed for 48 hours.
A workflow is an automation triggered by specific events, such as ticket creation, ticket updates, customer replies, or agent responses. In your scenario, you want an automation to trigger specifically 48 hours after a ticket has been closed.
To trigger automation based on elapsed hours, you should use a supervisor Rules (time-based action), which runs periodically (every hour), checks tickets based on the criteria you configure, and executes the associated actions accordingly.
To set this up, navigate to Automation → Supervisor Rules. Create a rule with criteria such as "Hours since status updated is greater than 48" or "equal to 48," along with an additional criterion like "Status is Closed." The rule will then only apply to tickets that have been closed for at least 48 hours since the last status update.
You can associate specific actions with this rule, such as updating the ticket status or sending a follow-up email to the customer, depending on your requirements.
10. If we use Zoho Desk openAPIs with AWS infra, are the APIs HIPAA compliant?
Yes. Since Zoho Desk is HIPAA compliant, the APIs provided by Zoho Desk are also HIPAA compliant. The data stored within Zoho Desk is already encrypted, ensuring that any API accessing this data remains compliant with HIPAA regulations.
However, If you plan to fetch Zoho Desk data stored in AWS infra using other third-party APIs, please verify those APIs and AWS infrastructure are HIPAA compliant.
11. Can we enable the Analytics module to generate reports for data spanning more than 12 months (or years)?
Currently, we are working on enabling report generation for data exceeding 12 months, and this feature should be available soon. This capability is now available in beta, allowing you to create custom reports with approximately 2 years of data. To enable this beta feature for your organization, please send an email to support@zohodesk.com.
12. Can we manually edit the translations used in the Help Center portal?
Zoho Desk supports multilingual setup. In this configuration, you can export a list of fields and their picklist values from Zoho Desk, then manually adjust the translations into your desired language, and then import them back into Zoho Desk. This will update the translations displayed to both your agents and customers within your Help Center and Desk interface.
If you continue to experience difficulties with the translations, please connect with us.
13. A significant issue I'm facing is that 'out of office' emails are reaching the ticketing system and automatically changing the status from 'on-hold' back to 'open.' Is there a straightforward solution to prevent this?
By default, when a customer replies to a ticket, the ticket status reverts automatically to the default "open" status. With a custom function, we can examine the subject or email, detect "out of office" emails, and ensure the ticket retains its original status instead of reopening.
Note: Custom Functions work in the Enterprise edition.
14. How can we configure an automated parallel or sequential approval process in Zoho Desk, similar to the one available in Zoho CRM?
Blueprints provide a viable solution for managing approvals. We are actively working on enhancing this feature to provide an advanced approval process similar to the one available in Zoho CRM.
15. Is it possible to lock ticket records in Zoho Desk, similar to Zoho CRM? Can we configure response and resolution SLA alerts separately?
We are currently working on providing an option to lock tickets based on a time set by the Admin. Once a ticket is closed, a locking period can be defined. After this locking period expires, the ticket will be fully locked. Any further incoming emails or conversations related to that ticket will automatically generate a follow-up ticket. You can then configure separate resolution and response escalation using SLA based to your requirements.
16. Is there a way to tell the system to send an email to the customer (email ticket), when creating a ticket on behalf of a customer?
Yes, there is an option called "Send As Email" available. You can enable this feature by navigating to Settings > Setup > Customization > Central Settings > Tickets. Once enabled, when you create a ticket, you can add the relevant content in the description, and the system will automatically send an email to the customer when you click "Send as Email" option instead of "Submit" upon ticket creation.
17. How can we add notes to a ticket that are visible at the ticket list level? We don't use tasks because they don't notify agents if the ticket is already closed.
To display notes at the ticket list level, one option is to use a custom multi-line field named "Note," where users can enter any relevant notes directly into the ticket. However, custom fields added to tickets are not visible in the standard ticket list view. To display them, use the "Tickets Table view", which supports showing custom fields, including the multi-line fields like "Note" at the list level. Additionally, custom fields can be used for searching and other functionalities, and these custom field will not visible to your customer.
18. During the ticket approval process, how to include comments explaining why an approval was rejected or approved?
You can utilize blueprints to manage approvals effectively. For instance, you can set up separate transitions for approval and rejection, each containing multiple steps such as adding comments, notes, updating fields, and more. Also, approval transitions within blueprint workflows support widgets. This means you can define specific steps or actions to occur whenever an approval or rejection takes place.
19. Do we have the option to create a task for another department directly, or can we only share an existing task from one department to another? How does inter-departmental task coordination work?
If you're referring to tasks in the Activities module (not tickets):
- You can directly create a task for another department only if you have the required permissions for that department.
- Task sharing between departments is not supported unlike tickets, which can be shared.
- If your profile has access to multiple departments or an "All Departments" view, you'll be able to select the department while creating a task.
- Note: Tasks and tickets are department-specific and cannot be linked across departments.
20. Is there a way to make an entity field mandatory when creating tickets?
If you are referring to custom fields or other fields available in the layout during entity creation, you can set these fields as mandatory within the layout settings. To do this, navigate to the layout section, select the field properties, and enable the option labeled "This field is mandatory." Once enabled, the field will become mandatory both during record creation and when editing existing records.
21. Can telephony integrations with Zoho Desk automatically create tickets for answered calls?
Typically, telephony integrations with Zoho Desk only support automatic ticket creation for missed calls. To automatically create tickets for answered calls, you can implement a Custom Function Workflow.
22. How can I enable the parent-child ticketing feature in Zoho Desk?
To enable the parent-child ticketing feature, please raise a request through this form, and we will enable it for you.
23. Is there a way to update a picklist value from A to B in tickets layout?
Within the layouts for picklist fields, there is an option called "Replace Values." When you use this option, the system will replace the old value with the new value you specify and automatically update all previous records accordingly.
24. What is a Lifecycle report, and how is it different from the History tab?
The Lifecycle report allows you to categorize and filter specific events related to status updates, department changes, event owners, and time frames.
In contrast, the History tab provides complete details of all events and entries related to a ticket.
The History tab shows every action taken on a ticket, while the Lifecycle report focuses specifically on selected events, providing a more targeted view.
25. Where can I find the "Ticket and Thread Summary" feature in Desk?
We recently updated the UX/UI for ticket summaries. Now, when you open any ticket in the detailed view, you'll see a button called "Zia Summary" at the top. Clicking this button to generate a summary of the entire ticket, including the subject, incoming and outgoing conversations, private comments, and public comments.
26. Can I customize the Zia summary to display specific information?
Yes, you can customize the Zia summary. For example, you can choose to summarize only incoming messages to understand the user's query, or only private comments to review internal discussions. You can select these options within the Zia summary feature.
27. How can I summarize individual threads within a ticket?
To summarize individual incoming or outgoing threads, click on the "More" icon next to the thread. Under the AI section, you'll find the "Summarize" option, which allows you to generate a thread summary. Refer here for details.
28. Is the Table view for tickets available for "All Departments"?
Currently, the Table view support for tickets across all departments is under implementation and not yet available.
29. What is Multilingual Support in the Customer Happiness rating feature?
Multilingual Support is a feature that allows you to present customer happiness rating forms in multiple languages. Previously, these forms were available only in English. With Multilingual Support, you can offer customer happiness surveys in the customer's preferred language, improving the accuracy and quality of the feedback you receive. Currently, we support more than 27 languages.
30. How can I configure translations for the customer happiness rating questions and choices?
You can configure translations for each question and choice under the Languages-Multilingual from Setup > Customization > Languages. Translate the questions and choices, and these translations will be displayed to customers based on their language preferences.
31. How does the system determine which language to display to the customer?
If the customer is a registered end-user in the help center, the system automatically detects and uses the language based on the user's preferences. If the customer is not registered, the system will use the language specified in the language field of the ticket to determine which language to display.
32. What is the Blueprint feature, and how does it work?
Blueprint is a feature designed to streamline and enforce specific processes that agents must follow when handling tickets. It ensures consistency and adherence to defined workflows.
For example, if you run an e-commerce store and want your agents to follow a specific process before changing a ticket status (such as from "open" to "on hold," or "on hold" to "refund initiated"), you can use Blueprint to define the required steps. This might include actions such as sending a reply to the customer, adding proper comments, or updating specific fields before allowing the status change.
33. What are the benefits of implementing Blueprint in ticket handling?
Implementing Blueprint helps ensure that agents follow a consistent, structured process when managing tickets. It enforces required actions and transitions, improving overall efficiency, accuracy, and quality of customer service.
34. When an Agent creates a ticket in one department and the ticket is moved to another department, the original creator loses visibility of that ticket because they don't belong to the receiving department. The ticket only becomes visible only if the ticket is shared to the creator's department again. Using the help center as an alternative is inconvenient because users must access a separate portal and cannot view internal notes. How can you address this?
Currently, Zoho Desk operates with department-specific categorization for both agents and tickets. If an agent (Agent A) has access only to Department A, they can only view tickets within Department A. Once a ticket created by Agent A is moved to Department B, Agent A loses visibility unless the ticket is explicitly shared back with their original department. Allowing agents to view tickets from departments they don't belong would cause conflict with the core concept of department-specific categorization, data privacy, and sharing policies. So, an agent can only access tickets within departments they have explicit access to, even if they created the ticket.
35. Have you encountered an issue where, when two department emails are mentioned in the 'To' address, a ticket is created in only one department instead of both? We have a mail service provider that auto-forwards emails individually to Desk support emails. After disabling the merge function, we noticed duplicate conversations appearing in the same department rather than separate tickets in two different departments. Why is this happening?
To identify why tickets aren't created in both departments when two department emails are included in the 'To' address, we need to analyze the email headers or the delivery method used by your mail service provider. This analysis will help us understand why the ticket is created in only one department and why both conversations appear in the same ticket. Please send us a sample email that should have created tickets in both departments to support@zohodesk.com. We will analyze it and provide you with a possible solution or pinpoint exactly where the issue lies.
36. How to send one email to multiple departments from Zoho Desk?
Currently, Zoho Desk does not support sending a single outgoing email directly to multiple departments. However, you can consider alternative methods:
- Use the CC field to include multiple recipients.
- Set up workflow automation to notify multiple email addresses using the recent thread content placeholder.
37. When reviewing analytics reports on resolution time, how is the time calculated for tickets in 'On Hold' status?
When generating a report based on resolution time, the resolution time calculates both open and on-hold time. However, if you generate reports specifically based on agent performance, the resolution time calculation excludes the on-hold time.
38. Is it possible to allow certain customers to view Analytics dashboards?
To provide access to analytics dashboards for specific customers, there are two possible approaches:
a. Create customized dashboards and embed them in your Help Center using custom widgets. (or)
b. You can add these customers as "light agents," allowing them limited access to preview specific dashboards.
39. Is it possible to include detailed information within the email body of reminder and comment notifications?
You can include detailed information in email notifications by adding placeholders like "Recent Thread" or "Recent Comment" to your email templates. This ensures the actual comment or thread content appears in the email body, rather than just a link.
40. Can we upload video recordings directly into the Knowledge Base?
Yes, you can upload video recordings directly into the Knowledge Base editor using the attachment option. The attachment feature supports files up to 20 MB. Alternatively, you can use cloud storage options to include larger video files.
41. Is there a way to view Zoho Desk tickets within Zoho CRM seamlessly?
Yes, it is possible to view Zoho Desk tickets alongside CRM contacts or accounts by integrating Zoho Desk with Zoho CRM. This integration allows you to access and manage Desk tickets directly within your CRM, creating a seamless experience for your team.
41. How can agents be notified that a customer has open tickets in other departments, even if they don’t have access to those departments?
There is a permission available that allows users to search for tickets across departments. Tickets from other departments can be displayed in a search view, even if the agent does not have direct access to those departments. To notify agents of tickets in other Departments, enable the permission Access Data across Departments.
42. Can we export ticket view results based on applied filters such as agent, timeframe, classification, status, or other criteria?
Zoho Desk supports exporting tickets classified under a custom view. However, filters applied directly within the tickets view are personal and temporary, and exporting these filtered results is on our roadmap.
Here are the recordings from our Ask the Experts 19 sessions:
Recent Topics
New User - Opening Stock Aging Report
I am setting up new client and am entering Opening Stock - created items and entered quantity/price details. Now the aging report is showing all the opening stock as new. How do I enter the Purchase Dates of these items so that I get accurate Inventory
Bulk Receive Multiple Purchase Orders
Is there a feature or function that will allow you to bulk receive issued purchase orders? I have about 100 that need to be received from 5 years ago.
Manual Invoice
How to create a Manual invoice, I need to enter Amount directly instead of (qty*Rate). our company is a service sector
Effective Inbox Organization: Folders vs Tags in Zoho Mail?
I'm exploring the best ways to organize a busy inbox, especially when managing multiple clients or project using Zoho Mail. I’d love to know what works best for others: 1. Do you prefer **folders** (possibly with sub-folders) for each client or project?
Merging contacts and or accounts
Hello, In a prior CRM we were able to merge contacts and or accounts. We have turned on the function to stop multiple contacts with the same email, so we can prevent multiple contacts from happening, however, we now have multiple contacts that have the
Capture Reason for absence next to Campaign Member Status. Is there a reasonable workaround?
I've reviewed the topics I could find to do with this but still couldn't find anything that satisfies our requirements: We would like to track a *reason* (picklist or text, doesn't matter which) why a Campaign Member (Lead or Contact associated with a
Zoho Learning Management System - Certificate Upload by Employees
We are planning to enroll employees in courses which are hosted by coursera or similar sites. I want to share the links of those courses and also want employees to upload their completion certificate once they are done. Is this function possible in
Add RTL and Hebrew Support for Candidate Portal (and Other Zoho Recruit Portals)
Dear Zoho Recruit Team, I hope you're doing well. We would like to request the ability to set the Candidate Portal to be Right-to-Left (RTL) and in Hebrew, similar to the existing functionality for the Career Site. Currently, when we set the Career Site
Button or Links order
Is there a way to re-order the buttons or links that are created?
'Pin' notes, so that specific ones are always visible at the top of the 'notes' tab.
It doesn't appear Bigin has the functionality to 'pin' a note to then have it always show at the top of the notes tab section of a record. Often times we have a large number of records, but key information we may want to have easily visible to all at
Request for Subform Support in Zoho CRM Webforms
Hi Team, I hope you're doing well. I would like to bring to your attention that currently, Zoho CRM Webforms do not support Subforms, which limits our ability to send forms that mirror the actual structure used within Zoho CRM. This feature is extremely
Formatting Mailing Labels
I want to use the "Print Mailing Labels" function on the drop down list, but I am not seeing a way to change the formatting on the mailing labels. At the moment, the information that appears on the mailing labels ARE NOT mailing addresses, but random
Maxima Address on FSM Customer
Im trying to add probably 50 customers from one company but couldn't make it since it has limit..how do i add the limit?
How to Track Inventory Usage from Zoho FSM to Zoho Inventory?
Hi everyone, We’re currently working on integrating Zoho FSM with Zoho Inventory, and we’ve encountered a challenge we’re hoping the community can help us understand better. Here’s the context: When we create a Work Order in Zoho FSM that involves parts
View subform entries without viewing a record in Zoho CRM | Kiosk Studio Session #8
In a nutshell Have you ever wanted to take a quick peek at a record's subform? Examples might be invoiced items in an invoice, ordered items in a sales order, or purchased items in a purchase order. Let's say you're viewing your list of invoices in Zoho
Transforma tu Inventario: Control Inteligente y Funciones Clave en Zoho Inventory (Spanish Webinar)
¿Tu empresa necesita mayor trazabilidad y control en almacenes? Conoce cómo gestionar tu inventario con eficiencia y automatización... ¡y descubre las sorpresas que trae Zoho Analytics! Participa en nuestro webinar gratuito en español, este 19 de agosto
Dashlane discontinued its free plan: Here's why Zoho Vault's free plan is worth the switch
Hey everyone, Dashlane password manager has officially announced that its free plan will be discontinued starting September 16, 2025. This change means that current free users will need to either upgrade to a paid subscription or export their data and
Mails are not being sent from custom Deluge function
We are having troubles to implement sending Invoices / Sales_Orders etc. automatically using following deluge script: attachment_template_id = "aaaa"; record_id = "bbbb"; mail_template_id = "cccc"; //NEW aproach fileUrl = "https://www.zohoapis.com/crm/v8/settings/inventory_templates/"
Currency transition
We are using Zoho CRM in Curacao, Dutch Caribbean. Our currency is currently the ANG. Curacao will be transition ing from using the ANG (Antillean Guilder) to using the XCG currency (Caribbean Guilder) on March 31st 2025, see: https://www.mcb-bank.com/caribbean-guilder.
Notes and Attachments visibility can now be restricted based on profiles
Dear All, We hope you're well! We are here with a quick update about Notes and Attachments profile permissions. In the past, a record's Notes and Attachments were visible by default to all users with record access. However, as notes and attachments can
Zoho webinar--hard for agencies
So, this is just a dive into our use case, and why we've been disappointed in Zoho webinar. We are a small marketing agency, and we wanted to add webinars to the services we provide, as many of our clients want to learn to use them as part of their content
Celebrating Raksha Bandhan with Zoho Desk: A Bond of Trust, Protection, and Service
Raksha Bandhan, celebrated across India, symbolizes the sacred bond of protection and affection between siblings. “Raksha” means protection, “Bandhan” means bond or knot: together, it represents a knot of care and security. On this occasion, we'd like
Banking > Import statements with a csv file
Good morning, I am regularly using the "import statement" option to match my transactions. I've been using csv files produced by my bank online and was able to import my transactions. Until now. Thank you for your help for fixing this ! Alex.
ZOHO BOOKS - RECEIVING MORE ITEMS THAN ORDERED
Hello, When trying to enter a vendor's bill that contains items with bigger quantity than ordered in the PO (it happens quite often) - The system would not let us save the bill and show this error: "Quantity recorded cannot be more than quantity ordered."
Has anyone successfully added Microsoft Graph API Oauth2 as a connection?
I'm having trouble getting Microsoft Graph API created as a connection in zoho crm. Has anyone successfully added Microsoft Graph API Oauth2 as a connection? My issue is not necessarily on the Zoho side, but understanding how to set up the Microsoft side
Syncing Timesheets between Projects and Desk
All users able to see their own timelog entries from all apps in one place, synced immediately. All managers able to view total/all time entries from one place. This is something that has come up for us and multiple clients. Example: we have a client
Spell Check default language
Hello All, Is it possible to set the Spell Check default language? I can't find it in the settings. Thanks a lot! Levente
Zoho Backstage 3.0 - Boostez vos événements avec des outils malins
Zoho Backstage vous accompagne dans l’organisation d’événements réussis, avec des outils qui simplifient la planification, optimisent l’exécution et renforcent la connexion avec votre public. La version 2.0 a apporté une nouvelle interface, plus de flexibilité
Portal user activity reporting
Aside from the metrics section in the admin dashboard, is there a way to view/create reports for portal user activity? Im looking for a more granular option to see exactly what users are utilizing the portal. Thanks!
Automation #11 - Auto Update Custom Fields with Values from Emails
This is a monthly series designed to help you get the best out of Desk. We take our cue from what's being discussed or asked about the most in our community. Then we find the right use cases that specifically highlight solutions, ideas and tips to optimize
Admins to set Agents Picture
Admins should not have to rely on agents to set a nice profile picture for them. Admins get the headshot pictures from HR and should be able to upload and set their picture, not rely on them to: 1) upload a picture at all 2) upload a good picture 3) upload
Time Tracking Reporting and Billing
I wish for the time tracking module to be enhanced further. Currently it is independent of Support Plans and Contracts. Support Plans and Contracts are also mostly separate. We need a better dashboard of this with the ability to natively mark billed or
Enhanced Email Signature Folding
We have departmental signatures setup which are great, however, when viewing ticket details, it gets very overwhelming when scrolling though threads and conversations where you scroll past ten different signatures of your own team, then ten signatures
How to add formatting in zoho.cliq.postToUser(...) message?
In a CRM Deluge function, I'm trying to use the message formatting guidelines given here: https://www.zoho.com/deluge/help/cliq/posting-to-zoho-cliq.html#message-formats My message is: message: #Title text. The result in Cliq is: #Title text. (no large
How to add line breaks in zoho.cliq.postToUser(...) message?
In a CRM function using Deluge I'm sending this message and attempting to add some line breaks but they are ignored. Is there another way to add these breaks? My message: message: New urgent task\nDescription \nThis is a fake description.\n A new line?
Zia Agents/End of Day Reports
As a manager or owner it would be nice if Zia analyzed today's (or this week's tickets) and gave an end of the day report to management team. - what important tickets were worked on or submitted today? - what agents were unproductive today and answered
Project Cost Tracking
I see there are questions/concerns that Zoho doesn't track costs to a tasks in a project. We are a manufacturer and are in the early stages of tracking costs to project. I would like to expand out the COGS Chart of accounts in Books and record costs via
How to record if the payment made is return due to transaction failed.
So there is Bill of $2000, and a payments made transaction to clear the bill. The amount is actually deducted from bank account. However, a few days later, I found the bank returned only $1750 cause there are $250 bank service charge for this failed transaction.
Help Center Customization UI
The customization screens for the help center needs the UI improved. It looks straight out of 2004. The Zoho Desk normal UI is great. All it takes is uniform fonts and colors across all parts of the tool... I compare this to Zendesk Guide.
Este domínio já está associado a esta conta
Fui fazer meu cadastro na zoho e quando digitei meu domínio recebi essa mensagem que meu domínio estava associado a uma conta que eu nem faço idéia de quem seja. Como que faço pra resolver isso? Atenciosamente, Anderson Souza.
Next Page