Blueprint enhancements - Parallel and multiple transitions, and more

Blueprint enhancements - Parallel and multiple transitions, and more

Last modified on Sep 4, 2023: All Zoho CRM users can now access these enhancements. Initially, these features were available only on an early access basis and by request. However, as of August 2, 2023, they have been made available to all users in all DCs.

Dear all,

Zoho CRM's Blueprints provide structure to business processes by mandating a version of it in your CRM and guiding your records through. It necessitates steps to be taken and serves as a template sales process for a salesperson. So far, Blueprint has allowed us to draw up different stages of a business process through different states and connect it through certain triggers that allow the transition of a record. 

While it’s not just that most business processes aren’t set in stone, it’s that different stages in business processes vary based on salespeople/users involved, type of customer, and even the product or service we sell. It’s not always the case that a record needs to move directly downstream without having to meander through multiple transitions before it needs to get to the next state. 

Parallel and multiple transitions provide the flexibility required for a record to move to its next state. 

Let’s take a business example: 

An SMB in the Real Estate sector with 10-15 Real Estate agents, connecting buyers and sellers, representing rental houses, houses for lease etc. The typical business process involves bringing in leads from various sources, validating them, and trying to close deals. There’s an inspection followed by a negotiation process once the buyer finds a property they like, document verification, contracts that are drawn up, loan processes and so on. 

We’ve set up a blueprint in place to ensure that the record moves freely through these different steps. Our blueprint includes relevant stages with transitions that enable the movement of the record to its next state. However, we’ve run into a few challenges between a few states where just one transition is not going to cut it. 

Parallel Transitions: 

Before our deal goes into the negotiation phase, the property needs to be thoroughly inspected. So, in our Blueprint, the record moves from the "Under inspection" state to the "Inspection completed" state. The inspection itself isn't a single process but includes four different checks: Mold inspection, Water Damage check, Structural damage, and Pest Inspection. Each of these processes will need to happen between these two states. 



Parallel transitions allow us to add all four of these as individual transitions that the record needs to go through before it reaches the "Inspection completed" state. 



Multiple transitions: 

As mentioned earlier, the real estate agency not only handles property sales but also rentals and leases. So when it comes to the contract signing part of the business process, we have three different options. Regardless of what contract is signed, however, the state the record reaches next is the same, "Contract Signed." 



Multiple transitions allow the sale contract signed, Rental contract signed, and Lease contract signed to each be added as transitions, allowing any one of them to be chosen for the record to move to its "Contract Signed" state. 



Combination and Sub-transitions: 

The documentation verification process is pretty overspecified in the Real Estate sector. Once the record lands on the "Legal Verified" state, there's a lot of paperwork involved before it gets to the "Loan processing" state. One major section is collateral assessment, which is pretty straightforward, and the other is document verification. 
Further, under document verification, we have Sale deed verification, Building plan approval, and Possession letter verification. 



The new enhancements in Blueprint not only let us create two transitions between these two states, i.e.: "Collateral assessment" and "Document verification", but allows for sub-transitions within the "Document verification" transition. So we'd be able to add "Sale deed verification", "Building plan approval", and "Possession letter verification", as individuals under the parent-transition, "Document verification". 



Reorder transitions: 

For any parallel or multiple transitions, you don't need to go through the checks in a specific order. These checks can happen in whichever order for each record. The current linear blueprint restricts you from offering this flexibility, which is what parallel transition solves. It helps you have simultaneous or "parallel" transitions side-by-side giving you the flexibility you need.



We'd love for you all to try out Parallel and Multiple transitions in your Blueprint processes and let us know how it's working for you. 


Thank you!

    • Recent Topics

    • [Free Webinar] Learning Table Series - Creator for the Education Industry

      Hello Everyone! We're thrilled to invite you to the Learning Table Series—a year-long initiative to demonstrate how Zoho Creator can transform industries with innovative and automated solutions. Each month focuses on a specific industry, and this time,

    • Remove the [## XXXX ###] from subject replies

      For our organisation we would like to have the [## XXXX ###] removed from subject replies. Cheers, Jurgen 365VitaalWerken

    • Self Client Authorization Issue

      Hi. Trying to test the api integration for Zoho Desk with the Self Client - Client Credintials flow method. I've created the self client, obtained the client id and secret, inputted "Desk.tickets.ALL" as my scope, and "ZohoDesk.[My Zoho Desk Org ID]"

    • How Can I Easily Access and Manage My GEPCO Online Bill Using Zoho Sheets?

      Hello everyone, I'm looking for an efficient way to access and manage my GEPCO online bills. I've heard that Zoho Sheets can be a powerful tool for organizing and tracking bills, but I'm not sure how to set it up for this specific purpose. Does anyone

    • All notes disappeared

      I've been using the notebook app for over five years on my phone without being logged into an account. A few days ago I opened the app and all my notes had disappeared. Since then I tried restarting my phone, updating the app and logging into my account,

    • How to add tags to a record with jS SDK 1.2/ZohoEmbededAppSDK

      Hello Is it possible to add tags to a record with jS SDK : https://live.zwidgets.com/js-sdk/1.2/ZohoEmbededAppSDK.min.js ZOHO.CRM.API.updateRecord Thanks for insights

    • URGENT: Zoho Forms reCAPTCHA v2 Spam Issue

      Hello Everyone, We are encountering a critical issue with Zoho Forms despite having reCAPTCHA v2 enabled. Our business is accessibility-focused, and we are receiving a high volume of spam submissions, which is significantly affecting our workflow and

    • View all Products by pipeline deal

      Very good CRM I use it everyday only problem is modules not being interconnected especially products module. The main problem of products module are separated from contacts and company modules and only being connected to the Deals module. This way there's

    • Add "Lead Image" in Bulk?

      Each of our Leads is accompanied with a URL containing a photo of the lead when they come in. We currently have to manually download then upload the photo to the lead. This is a HUGE waste of time. Is there any way to AUTOMATICALLY add the photos to the

    • Map fields from CRM record to Finance Suite/Books Invoice fields

      I'm trying to auto-fill unique record specific field inputs that I have in my Contacts and Deals modules onto Invoices created from the record's finance suite related list upon creation.  One example is a field called "Job Number" that I have in my Contact

    • What's New in Zoho Analytics - December 2024

      Hello Users! We’re excited to bring you a roundup of the latest features and improvements in Zoho Analytics. These updates are designed to elevate your data analytics experience, making it more powerful, interactive, and seamless. Let’s dive in! Expanded

    • trying to access CRM Variables with JS SDK

      Hello i built a widget with Sigma, i create CRM VARIABLES in custom properties. I try to access them in function : ZOHO.embeddedApp.on("PageLoad",function(data) with : ZOHO.CRM.CONFIG.getVariable("mycrmvariable").then(function(data){ console.log("mycrmvariable

    • Writing on sketch cards is bugged when zoomed in

      When zoomed in, it writes a noticeable distance above or to the side of where you're actually trying to write. The further you're zoomed in, the more noticeable it is. Zooming is also entirely absent on the desktop version.

    • Private Project

      Hi, I would like to know if a user can create a Private project that only he's able to see it. Not even the ADMIN user. Thanks

    • Accordion in tabs to create FAQs, etc.

      Accordion elements do not seem to be able to be placed in the tabs. It would be useful to be able to do this. Thank you.

    • Which are the IP addresses to use for 'split delivery' with Office 365? (Zoho mail inbound gateway)

      Hi, I'm trying to set up 'split delivery' (email routing) with Office 365. I'm following the instructions to set up Office 365 as the primary server (https://www.zoho.com/mail/help/adminconsole/coexistence-with-office365.html) One of the prerequisites

    • Zoho Projects 2024 Recap

      Dear Users, As we conclude another remarkable year, it's the time to reflect on the journey we've just completed. The year 2024, defined by significant milestones, challenges, achievements, and important lessons. Every moment has contributed to the story

    • Custom Fields at Line Level

      Hi, is there an ability to add custom fields at line level? I need to track the start and the end date for each product within an invoice and I can't seem to find an option to do this.

    • Zoho API Error Code 7019 when adding job.

      Hello, I am following the documentation found here. https://www.zoho.com/people/api/timesheet/adding-jobs.html Regardless of how I try and post the data (including just using the example requests), I receive back the response {'response': {'message':

    • How to see changes with ZOHO.CRM.API.updateRecord(config) without reload page

      hello got a widget in account, trigger with a button i copy data to account when click on a button, in my popup All is working well. But i need to reload the page to see the update. How can i see the changes without reloading page, only when close the

    • How to call a Creator function which is in a different Creator application?

      How to call a Creator function which is in a different Creator application?

    • Unable to send message; Reason: 554 5.1.8 Email Outgoing Blocked

      My account is mino@flawless-frames.com, or flawlessframesstudio@gmail.com Could you please unblock my account, I've got restricted from sending more emails

    • Stock Count

      The stock count is a nice new feature, but we cannot figure out how to: 1. Use it without assigning to a person, we have a team or one of multiple do stock counts as do most any company. 2. Add any extra fields to what the "counter" sees. The most important

    • Move a Contact from Current Account to a NEW Account

      I do not believe the functionality to Move a Contact from a Current Account to a New Account is not available. Please someone tell me I am missing something! I have been through designing, developing, using and selling CRM systems for over 25 years and had this functionality20+ years ago in other CRMs.  In the real world people move from one organisation to another. In the sales, finance and technical world it is nice to see the communication history with that person in their old account and also

    • Force Specific Layout for CRM Contacts Portal

      Hello: We're in trial on ZOHO One and looking at the CRM Portal (just for the contacts module). We have a client layout set up for Contacts that is working well for our internally, but for the portal we don't want to require (make mandatory) some of the

    • Automatic Removal of Departments and Groups for Inactive Employees in Zoho One

      Hi Zoho One Team, We hope you're doing well. Currently, when an employee is marked as inactive in Zoho One, they remain listed as a member of their department and associated groups. This creates a challenge in maintaining accurate records and ensuring

    • Change eMail Template for Event-Invitations

      Hello ZOHO-CRM Team How I can change the eMail Template for Event-Invitations? I work with the German Version of the Free Version. I know how I can modify eMail alerts or Signature Templates, but where I can other eMails modify you send out? Thank you for your answer. Regards, Juerg

    • Zoho Social integration with Zoho Flow

      Is there any plans for Zoho Social integration with Zoho Flow?

    • Zoho CRM Widget and translations

      Hi everyone! We're building a Widget with zoho-extension-toolkit, how is localization supposed to work? "zet init" created a translations/en.json file, but what should go inside it and how is it supposed to be accessed from the Widget/javascript? Thanks

    • Bienvenue à Zoho FSM : l'optimisation des opérations locales qui offre une expérience de service impeccable

      Nous sommes ravis de vous présenter Zoho FSM, la plateforme de gestion des services terrain de bout en bout. Les solutions de gestion des services locaux s'adressent aux organisations qui effectuent des activités d'installation, de réparation et de maintenance

    • Adding tag to specific record as an acion in a workflow

      Hi! I've created the following workflow in the module 'Leads'. When a record meets the criteria, there should be a tag added to the specific record in the module 'Contacts'. In the module 'Leads', there is a look-up field named 'Kandidaat' which is connected

    • Trying to catch error with ZOHO.CRM.HTTP.get (Response Code)

      Hello, I'm trying to get response header from ZOHO.CRM.HTTP.get, in order to catch error like 404 or something else but it seems that ZOHO.CRM.HTTP.get() method only returns the body of the response, and I see no way to access the headers returned. Is

    • FSM - How to ADD PHOTOS to Estimates & Invoices

      How can you add photos to estimates and invoices that are being emailed to the client so the can see what you are estimating and your completed work?

    • Free developer edition of Zoho CRM

      A question for Zoho and other developers: How can you set up a demonstration version of a Zoho CRM implementation to show employers/clients what can be achieved? Do you pay for Zoho CRM Enterprise/Zoho One for this purpose? Does Zoho offer a free version

    • Can I add Conditional merge tags on my Templates?

      Hi I was wondering if I can use Conditional Mail Merge tags inside my Email templates/Quotes etc within the CRM? In spanish and in our business we use gender and academic degree salutations , ie: Dr., Dra., Sr., Srta., so the beginning of an email / letter

    • Where are scheduled emails stored?

      After you schedule an email to go out through the CRM, how do you go about changing that scheduled email? Or even where can I see the list of emails scheduled to go out? They are not listed in my Zoho Mail account in Outbox which has been the only answer

    • CRM Home Page Dashboard, how can i add zoho desk cases?

      How can i see which tickets are in my group as a dashboard component on the home tab in zoho crm? I don't see any way of adding this.

    • Custom Module missing SDK function fetchRelatedRecords(...) in a Client Script

      Good day, We have added a new module with a Multi-Lookup relation to Contacts.  When we tried to use the fetchRelatedRecords(id, related_list_api_name) function to get Related Records it is missing for our new custom module. https://js.zohocdn.com/crm/5124797/documentation/DotSDK/Modules.html

    • Assistance with Setting Default Values for Zoho Chat Custom Fields

      I am currently using the Zoho Chat JavaScript API to successfully add custom fields to the chat interface. While the implementation of these fields has been smooth, I am now looking to set default values for these custom fields. However, I couldn't find

    • Subform Client Script

      Good day,  I have a subform where users can subscribe to various magazines. I would like to prevent the user from selecting the same magazine twice when adding a new row. Is there a way to prevent the user from doing this? (Can it be done via a client

    • Next Page