This guide will cover the information needed for a CRM admin to maintain the built-in Telephony feature in Zoho CRM. Please use the table of contents on the right hand side (under On this page) to navigate through this document. If you're accessing this page on a smartphone or a tablet, it will be available at the bottom.

Built-In Telephony does not support outgoing calls to China.

Permission required

Users with Administrator permission can set up this feature.

Built-in Telephony page

Your CRM's built-in telephony system can be managed using the Built-in Telephony page (available at Setup > Channels > Telephony > Installed > InBuilt > Details). Different aspects of the feature are neatly organized into tabs for easy access and configuration.

These tabs include:

1. Telephony Plan Details: This is where you manage credits and storage. You can:
   
1. Purchase additional credits and set up auto-recharge
   
2. Access credit usage analytics
   
3. View the history of your credit purchases
   
4. View recording storage usage and manage your storage plan (for your call recordings)
   
2. Phone Numbers: This tab holds the list of all your purchased numbers. You can add and delete phone numbers and associate them to call flows from here.
   
3. Call Flows: A call flow is the process through which an incoming call is handled. The Call Flows tab will list all such flows configured for your organization. You can create, modify, and delete call flows from here.
   
4. Telephony Users: All the CRM users who need to use the Telephony service can be managed here. You can add and remove telephony users. You'll also be able to filter them by telephony groups (collections of telephony users).
   
5. Telephony Groups: You can group your telephony users into groups to make it easier to route incoming calls to the right person. This is the tab where you manage such groups.
   
6. Calls History: All the incoming, outgoing, and missed calls will be listed here. You can download this list as a csv file.
   

Telephony Plan Details

Credits

1. Number maintenance (monthly): The organization will be charged in credits each month based on the number type and country.
   
2. Recording storage (monthly): Zoho provides 1000 minutes of free recording storage for each organization. If the limit is exceeded, new recordings will not be saved. To extend the recording storage, you can upgrade the telephony plan to one of the following:
   
1. 50,000 minutes: 25 credits/month
   
2. 200,000 minutes: 50 credits/month
   
3. 1,000,000 minutes: 75 credits/month
   
3. Call activity (usage-based): Credits will be debited from the wallet for both incoming and outgoing call activities. This charge for call activity is not debited monthly. It is based on call usage. You will need to recharge your wallet when the credits are low or choose to auto recharge whenever the available credits fall below a set amount.
   Note: Click here to view the call rates for built-in telephony.

To view available credits

1. Navigate to Setup > Channels > Telephony > Installed > InBuilt > Details.
   
2. In the Built-In Telephony page, the Telephony Plan Details tab is selected by default. If it is not selected, click the Telephony Plan Details tab.
   
3. You can view number of credits under Available Telephony Credits.
   
   
   
   

To buy telephony credits

1. Navigate to Setup > Channels > Telephony > Installed > InBuilt > Details.
   
2. In the Built-In Telephony page, the Telephony Plan Details tab is selected by default. If it is not selected, click the Telephony Plan Details tab.
   
3. Click Buy Telephony Credits.
   
   
   
   
4. In the Buy Credits popup, enter the Number of Phone Credits to be Purchased.
   
5. Click Make Payment.
   
6. In the Purchase Phone Credits popup that appears, verify the price and click Calculate Price.
   
7. After verifying the price, click Make Payment.
   

To auto-recharge credits

1. Navigate to Setup > Channels > Telephony > Installed > InBuilt > Details.
   
2. In the Built-In Telephony page, the Telephony Plan Details tab is selected by default. If it is not selected, click the Telephony Plan Details tab.
   
3. Click the More (...) icon and select Auto Recharge.
   
   
   
   
4. In the Auto Recharge popup, toggle Would you like to enable Auto Recharge? on.
   
   
5. Enter the minimum number of credits for your account in the Minimum Balance Limit field. A recharge will be initiated whenever the available number of credits falls below this minimum number.
   
6. Enter the number of credits to add in the Credits To Be Added When Balance Goes Below Minimum Balance field. When a recharge is initiated automatically, this number of credits is purchased automatically.
   
7. Click Save.
   

Partners and partner-associated customers will not have the auto recharge option.

To view credit usage

1. Navigate to Setup > Channels > Telephony > Installed > InBuilt > Details.
   
2. In the Built-In Telephony  page, the Telephony Plan Details tab is selected by default. If it is not selected, click the Telephony Plan Details tab.
   
3. In the Credit Usage Analysis section, you can view:
   
1. Number of credits purchased in a given time period
   
2. Number of credits used in that time period
   
4. You can also specify the time period for which you want to see usage (This week, last week, this month, last month, this quarter, last quarter, or custom range).
   
   
   
   

To view credit purchase history

1. Navigate to Setup > Channels > Telephony > Installed > InBuilt > Details.
   
2. In the Built-In Telephony page, the Telephony Plan Details tab is selected by default. If it is not selected, click the Telephony Plan Details tab.
   
3. Click the More (...) icon and select View Credit Purchase History.
   
   
   
   
4. In the Credit Purchase History popup, you'll see the list of all your credit purchases with details like:
   

1. the date of purchase
   
2. the user who initiated the purchase, and
   
3. the number of credits purchased.
   
   
   

Recording Storage

To record incoming calls

1. Transfer to a user
   
2. Transfer to a telephony group
   

To record outgoing calls

When you add or edit a telephony user, you can enable the Record outgoing calls made by this user checkbox.

These recordings will be available in the call's entry in the Calls History tab.

Zoho provides 1000 minutes of free storage space for each organization. If you exceed this limit, admins will be notified and new recordings will not be stored. The recording storage usage will be displayed as a chart so that the admins can monitor the organization's storage usage.

Admins can manage recording storage in two ways:

1. Upgrade the recording storage plan:
   
1. 50,000 minutes: 25 credits/month
   
2. 200,000 minutes: 50 credits/month
   
3. 1,000,000 minutes: 75 credits/month
   
2. Delete recordings automatically 3 months or 6 months after the date of recording.
   

To change your storage plan

1. Navigate to Setup > Channels > Telephony > Installed > InBuilt > Details.
   
2. In the Built-In Telephony page, the Telephony Plan Details tab is selected by default. If it is not selected, click the Telephony Plan Details tab.
   
3. Click the More (...) icon and select Change Storage Plan.
   
   
   
   
4. In the Change Storage Plan popup, select the plan.
   
   
5. Click Next.
   
6. Validate the purchase summary and click Buy Storage.
   

To set automatic deletion of recordings

1. Navigate to Setup > Channels > Telephony > Installed > InBuilt > Details.
   
2. In the Built-In Telephony page, the Telephony Plan Details tab is selected by default. If it is not selected, click the Telephony Plan Details tab.
   
3. Under the Recording Storage section, enable Delete Recordings after 3 or 6 months.
   
   

To view storage usage

1. Navigate to Setup > Channels > Telephony > Installed > InBuilt > Details.
   
2. In the Built-In Telephony page, the Telephony Plan Details tab is selected by default. If it is not selected, click the Telephony Plan Details tab.
   
3. Under the Recording Storage section, you can see the number of minutes of recordings against the available storage.
   
   
   
   

Phone Numbers

Built-in telephony is designed to support multiple numbers at the same time. You have the option to purchase three types of phone numbers: Local, Mobile, and Toll-free, which can be combined to fulfill all your business needs. For instance, you can assign a number for outgoing calls, another for handling incoming product inquiries, and a different one for customer support.

To buy a phone number

1. Navigate to Setup > Channels > Telephony > Installed > InBuilt > Details.
   
   
   
   
2. In the Built-In Telephony page, click the Phone Numbers tab.
   
3. You can view the details of existing numbers in this tab. Click Buy Phone Number.
   
   
   
   
4. In the Buy a number pop-up:
   
   
1. Choose the Country.
   
2. Select the Number Type as Local, Mobile, or Toll Free from the dropdown list. Please note that all options may not be available for the country you've chosen.
   
3. Depending on the number type, you may have to select a Region or fill in an Address.
   
4. Choose a number from the Available Phone Numbers dropdown and click Next.
   
5. Verify the purchase summary and click Buy.
   
   
6. In the Confirm Your Purchase pop-up, click Buy Phone Number.
   
   
   
   

Note: There is no limit on the number of phone numbers an organization can have.

To delete a number

1. Navigate to Setup > Channels > Telephony > Installed > Built-in > Details.
   
2. In the Built-In Telephony page, click the Phone Numbers tab.
   
3. In this tab, all the purchased numbers will be shown. Hover over the number you want to delete and click the More (...) icon.
   
   
4. Click Delete Phone Number.
   
5. On the confirmation pop-up for permanently deleting the number, click Confirm.
   
   

Call flows

Call flows allow you to configure how incoming calls are handled. You can build these using the Call Flow builder.

You can build call flows to:

1. Route inquiry calls about specific products to sales representatives who specialize in those products
   
2. Include IVR to promote self service for common problems.
   
3. Simultaneously ring all available users in the customer support group to ensure quick response, and so on.
   

No matter what the use case is, each call flow comprises of two basic elements: states and connections between those states.

States

A state is a particular step in the call flow process. The different states available are:

1. Transfer to a user: Use this when you want to route the call to one particular telephony user.
   
   
   When you add this state to the builder, you have the following options:
   

1. Enable or disable call recording
   
2. Set the ring timeout (in seconds)
   
3. Enable or disable queuing of calls if user is on another call. If this is enabled, you'll be able to make queue-related configurations like:
   
1. the maximum number of calls in queue
   
2. Enable or disable announcement for those callers. If enabled, you can decide to either read out a text message or play an audio.
   
3. Choose the music to be played during the waiting period, and how many times that music is to be played.
   
4. Route the call to other states in case:
   
1. The call is timed out (ring timeout duration is over)
   
2. the user is not available or
   
3. if the user is busy (the user is available but is busy on another call).
   
   

1. Transfer to a telephony group: You can also route calls to a telephony group. In this case, you have the options available in the Transfer to a user state along with the ability to set the ringing type as parallel or sequential. For example, you can route a call related to billing details to a group of billing specialists.
   
   
   
   

1. Parallel: All users in the group will receive the incoming call simultaneously.
   
2. Sequential: The call will be routed to the users in sequence. You can set the time limit for a user to pick up the call. If the time limit is exceeded, the call moves on to the next user.
   
   
   
   
   The order of routing will be the order in which the users have logged into Zoho CRM. If a user is unavailable, the call will routed to the next user.
   
3. You can route the call to other states in case the call is timed out, if no user is available, or if all the users are busy on other calls.
   
   
   

1. Transfer to an IVR:  IVR (Interactive Voice Response) is a computer-operated response system which will interact with callers and route their call based on the inputs they make. You can decide if the announcement should be the reading of a text message, an audio file, or an audio URL.
   
   
   You can configure IVR using the Key Press and Menu options. You can connect each of these menu options to another state. You can set a maximum of 11 Menu options (0 - 9 and *).
   
   
   Note: This state has a system-defined timeout of 5 seconds from the end of the announcement.
   
2. Announce to caller: This option allows you to have a text message or audio ( via audio file or audio URL) played to the caller.
   
   
   Once the announcement has been successfully made, you can route the caller to the next state if needed.
   
   
   
   
3. Leave voicemail: Sometimes, it's just not possible to immediately respond to all customers. In such cases, you can ask the caller to leave a voice mail. Like the previous options, you can enter text, an audio file, or an audio URL for the announcement. You can also set the timeout for this state.
   
   
   You can route the call to another state in case of timeout.
   
   
   

The maximum length of voicemails is 2 minutes.

Note

1. You can edit or remove a state by hovering over it, clicking the more icon (...) and selecting Edit/ Remove.
   
   
   
   
2. Wherever you have the option of adding audio, you can upload WAV files or add an audio URL.
   

Connections

A connection is a route between one state and another.

Please remember that:

1. The start state can be connected to only one other state.
   
   
2. Each state can have a maximum of 10 connections coming into it from other states.
   
3. Each state can have one or more connections leaving the state. This can range from one in the case of Leave voicemail state to eleven in the case of Transfer to IVR state.
   
4. No loops are allowed in a call flow. Let's say that a call has to pass through three states to reach the present state. You cannot connect the present state to any of those three states.
   

Using the builder's intuitive interface, you can quickly build sophisticated call flows by dragging and dropping states and making connections between them. To make a connection, click and drag the connecting arrow from the output of a state to the next state.

You can delete a connection by clicking the trash icon.

To create a call flow

1. Navigate to Setup > Channels > Telephony > Installed > Built-in > Details.
   
2. In the Built-In Telephony page, click the Call Flows tab.
   
3. Click Create Call Flow.
   
   
4. In the Create Call Flow popup, enter the Name for the flow and add a Description.
   
   
5. Select the Associated Phone Numbers from the dropdown list. Incoming calls to these numbers will follow the process you set up for this flow.
   
6. Click Next.
   
7. In the Call Flow builder, drag and drop the required states from the left pane. You'll have to configure each of these states.
   
8. Add and delete connections between states as required.
   
9. Click Publish.
   

The flow is now enabled for the associated numbers.

Note

1. If a number is not associated with a call flow, incoming calls will be rejected for that number.
   
2. You can associate a number with an existing call flow or new one from the Phone Numbers tab. Hover over the number, click the More (...) icon and select the required option.
   
   
3. You can save the flow as a draft by clicking the Save as Draft button.
   
   
   
   
4. If you've already published a flow, you can compare the draft with the published version by selecting their respective tabs in the Call Flow builder.
   
   
   
   
5. To deactivate the flow, toggle the Status in the Call Flows tab.
   
   
   

To edit a call flow

1. Navigate to Setup > Channels > Telephony > Installed > Built-in > Details.
   
2. In the Built-In Telephony page, click the Call Flows tab.
   
3. Hover over the call flow you want to edit and click the More (...) icon.
   
4. Select Edit Call Flow.
   
5. In the Edit Call Flow popup, you can modify details like Name, Description, or Associated Numbers.
   
6. Click Next.
   
7. Make changes to the call flow using the call flow builder.
   
8. Click Publish to make those changes final.
   

To delete a call flow

1. Navigate to Setup > Channels > Telephony > Installed > Built-in > Details.
   
2. In the Built-In Telephony page, click the Call Flows tab.
   
3. Hover over the call flow you want to edit and click the More (...) icon.
   
4. Select Delete Call Flow.
   
5. In the popup that appears, click Confirm.
   

Telephony users

Telephony users are your CRM users who can make and receive calls using the built-in telephony system. They can receive incoming calls from associated numbers if they are added to a call flow (as part of transfer to a user state or transfer to a telephony group state). They can make outgoing calls from numbers associated to them.

Note: If you do not want to display the phone number during an outgoing call, you can mask the number using a custom caller ID so that if the prospect or customer calls you back, they will be redirected to the dedicated support number. When you add/edit a telephony user, you'll be able to enable this for that user.

To add a telephony user

1. Navigate to Setup > Channels > Telephony > Installed > Built-in > Details.
   
2. In the Built-In Telephony page, click the Telephony Users tab.
   
3. Click Add User.
   
4. In the Create Telephony User popup, select the User.
   
   
5. If you want to add this user to a Telephony Group, you can select the group from the dropdown list.
   
6. If you want the user to be able to make outbound calls, select the Allow to make outgoing calls checkbox.
   
7. If you want to record calls made by this user, select the Record outgoing calls made by this user checkbox.
   
8. Select the Outgoing caller IDs that must be available for this user.
   
9. If you want to allow the user to add custom caller IDs, select the Allow to add custom outgoing caller IDs checkbox.
   

To edit a telephony user

1. Navigate to Setup > Channels > Telephony > Installed > Built-in > Details.
   
2. In the Built-In Telephony page, click the Telephony Users tab.
   
3. Hover over the telephony user whose details need to be edited and click the More (...) icon.
   
4. Select Edit Telephony User.
   
5. In the Edit Telephony User popup, make the necessary changes.
   
6. Click Save.
   

To delete a telephony user

1. Navigate to Setup > Channels > Telephony > Installed > Built-in > Details.
   
2. In the Built-In Telephony page, click the Telephony Users tab.
   
3. Hover over the telephony user whose details need to be edited and click the More (...) icon.
   
4. Select Remove Telephony User.
   
5. In the popup that appears, click Confirm.
   

Telephony groups

Telephony groups allow you to group your telephony users as per your needs. For example, you can group your telephony users by their capabilities (Billing specialists, sales representatives, customer support agents, and so on). They can receive incoming calls from associated numbers if they are added to a call flow (as part of transfer to a telephony group state).

To add a telephony group

1. Navigate to Setup > Channels > Telephony > Installed > Built-in > Details.
   
2. In the Built-In Telephony page, click the Telephony Groups tab.
   
3. Click Create Telephony Group.
   
   
   
   
4. In the Create Telephony Group popup, enter the Name and Description of the group.
   
   
5. Select the telephony users from the Telephony Users dropdown.
   
6. Click Save.
   

To edit a telephony group

1. Navigate to Setup > Channels > Telephony > Installed > Built-in > Details.
   
2. In the Built-In Telephony page, click the Telephony Groups tab.
   
3. Hover over the telephony group whose details need to be edited and click the More (...) icon.
   
4. Select Edit Telephony Group.
   
5. In the Edit Telephony Group popup, make the necessary changes.
   
6. Click Save.
   

To delete a telephony group

1. Navigate to Setup > Channels > Telephony > Installed > Built-in > Details.
   
2. In the Built-In Telephony page, click the Telephony Groups tab.
   
3. Hover over the telephony group whose details need to be edited and click the More (...) icon.
   
4. Select Delete Telephony Group.
   
5. In the popup that appears, click Confirm.
   

Call History

You can view and download the call report to help you oversee your operations and manage your telephony subscriptions. The report displays information like the call owner, call type, call from, call to, date and time, duration, recording duration, the credits charged for each activity, and includes an option to play the call recording.

You can also filter the report based on the call type, call owner, or the time period within which the call happened.

To view and download the call report

1. Navigate to Setup > Channels > Telephony > Installed > InBuilt > Details.
   
2. In the Built-In Telephony page, select the Calls History tab.
   
3. Click the funnel icon to filter the call report based on Call Owner, Call Type, and Time of Call.
   
   
   
   
4. Click Download to download the call history to your device.
   
5. Choose the location in your local device and click Save.
   

See Also: