Credit Calculation and Concurrency in Zoho CRM APIs
Hello everyone!
Welcome to Kaizen! This week, we will discuss credit calculation and concurrency in Zoho CRM APIs.
Credit calculation
API rate limiting is crucial to ensure fair resource distribution, maintain optimal service quality for all users, and safeguard our system from potential security threats. It helps us provide a consistent, reliable, and secure service to every user, while encouraging efficient and thoughtful API usage. API Usage in a CRM organization is calculated based on credits. When you make an API call, a specific number of credits are deducted from the total number of credits available to you. The number of credits available to you differs depending on the edition and user licence purchased. Below table shows the same.
Edition | Allowed Credits | Maximum Credits |
Free Edition | 5000 credits | 5000 credits |
Standard/Starter Edition | 50,000 credits + (Number of User licenses x 250) + Add-on credits | 100,000 credits |
Professional | 50,000 credits + (Number of User licenses x 500) + Add-on credits | 1,000,000 credits |
Enterprise/Zoho One | 50,000 credits + (Number of User licenses x 1000) + Add-on credits | 2,000,000 credits |
Ultimate/CRM Plus | 50,000 credits + (Number of User licenses x 2000) + Add-on credits | Unlimited |
If you think you will need more API credits in addition to the daily allowed limit, you can purchase additional credits.
The API Rate Limit is for a rolling window of 24 hours i.e., for every API call, we will check the API credits consumed in the last 24 hours to see whether the current API call can be allowed or not. When you make the very first API call , a 24 hour window begins. The API credits you used at each time interval will be freed up after 24 hours corresponding to each time interval.
Consider the above example where we assume that you are making API calls starting from 9 AM. The total available credits are 5000. For simplicity, let us consider that there are no API calls made on the previous day and no additional credits were purchased.
Between 9:00 AM and 9:05 AM on day 1, you use up 100 credits and you are left with 4900 credits . Since no API calls were made the previous day, you have no API credits getting freed up at that time. Between 9:05 AM and 9:10 AM, you use up 150 credits, leaving you with 4750 credits. Let us assume that you exhausted your available limit by 8.45 AM the next day.
At 9 AM on day 2, 100 API credits used on the previous day (day 1) will be freed up. Similarly, at 9:05 AM on day 2 , 150 credits will be freed. In this case API calls between 8:45 AM and 9 AM will result in system errors.
Let us consider the same scenario if you had purchased add-on credits. After you exhaust your available limit by 8:45 AM on day 2, the credits for further API calls will be considered from the purchased add-on credits. At 9 AM, when the 100 API credits used on the previous day are freed up they are available for your use instead of add-on credits.
Concurrency
In addition to 24 hour rolling window throttler, Zoho CRM has concurrency limit being applied for APIs. It will limit the no of parallel API calls being active at one time instance. Concurrency limit is checked per org per OAuth app. Concurrency limit differs based on your Zoho CRM edition.
Edition | Concurrency limit for an Org/App |
Free | 5 |
Standard/Starter | 10 |
Professional | 15 |
Enterprise/Zoho One | 20 |
Ultimate/CRM Plus | 25 |
Let's assume your organization has a concurrency limit set at 10. A sequence of API calls are made one after another. When all these API calls are still in process with each API call you make, the number of concurrent API calls increases incrementally. Initially, when you make the first API call, concurrency is 1. For the second API call made before the end of the first API call, concurrency becomes 2, and so on. This scenario is shown in the picture above. Once you reach the 10th API call, concurrency reaches its maximum limit of 10. As a result, the 11th API call fails.
However, let's assume that the 5th API call completes its process, thereby reducing the concurrency level to 9. In this state, the 12th API call can be made successfully without encountering any errors.
Sub-concurrency
Some APIs will take much more computing resources than other APIs. For example, an Insert Records API call for a 1000 records will take much more resources than a Get Leads API call for a particular lead id.
For such APIs, we'll apply a separate concurrency limit namely sub-concurrency limit to ensure that the APIs are being used responsibly. The APIs that will falls under the sub-concurrency limit are
- Get Records with cvid or sort_by parameters
- Convert Lead
- Insert, Update, or Upsert records (when the record count is greater than 10)
- Send Mail
- Search records API invoked from function
- Query API
- Composite API
Across all editions of Zoho CRM, the sub-concurrency limit is set as 10. You can make 10 concurrent requests for a combination of the above listed APIs or 10 concurrent requests of one of the APIs. However, if the total number of sub-concurrent requests exceeds 10, the system will generate a "TOO_MANY_REQUESTS" error.
Let's understand how concurrency and sub-concurrency apply together to your API calls. Assume that in your organization, the concurrency limit is set at 12 and sub-concurrency limit is set at 10.
We'll consider a case where send mail API call has been fired in parallel 11 times, for which the sub-concurrency is applicable. For the first 10 send mail API calls, there won't be any error and sub-concurrency limit will reach it's maximum allowed limit of 10. When the 11th API call is made, the error "TOO_MANY_REQUESTS" will be thrown even though the concurrency limit of 12 has not reached .
Now, let's consider the 12th API call, doesn't fall under the category of API calls subject to the sub-concurrency limit, say it is a normal GET records call with just fields & ids parameter. This call goes through successfully without encountering any errors. Similarly, the 13th API call, a GET user API call, also goes through. At this point, the concurrency is 12, and the concurrency limit is set at 12 as well. The 14th API call will result in an error because the concurrency limit exceeded. In short, the number of API calls allowed at a time depends on the concurrency limit and sub-concurrency limit.
We hope you found this post useful and it increased your understanding. Stay tuned for more.
Cheers!
Mable
Access your files securely from anywhere
New to Zoho Recruit?
Zoho Developer Community
New to Zoho LandingPage?
Zoho LandingPage Resources
New to Zoho Survey?
New to Zoho CRM Plus?
Deliver unforgettable customer experiences
New to Zoho CRM Plus?
Deliver unforgettable customer experiences
New to Zoho Marketing Plus?
Everything you need to run your marketing
New to Zoho Marketing Plus?
Everything you need to run your marketing
New to Bigin?
Topic Participants
Mable Mary M P
David
Praveen Sankar
Sticky Posts
Kaizen #197: Frequently Asked Questions on GraphQL APIs
🎊 Nearing 200th Kaizen Post – We want to hear from you! Do you have any questions, suggestions, or topics you would like us to cover in future posts? Your insights and suggestions help us shape future content and make this series better for everyone.Kaizen #198: Using Client Script for Custom Validation in Blueprint
Nearing 200th Kaizen Post – 1 More to the Big Two-Oh-Oh! Do you have any questions, suggestions, or topics you would like us to cover in future posts? Your insights and suggestions help us shape future content and make this series better for everyone.Celebrating 200 posts of Kaizen! Share your ideas for the milestone post
Hello Developers, We launched the Kaizen series in 2019 to share helpful content to support your Zoho CRM development journey. Staying true to its spirit—Kaizen Series: Continuous Improvement for Developer Experience—we've shared everything from FAQsKaizen #193: Creating different fields in Zoho CRM through API
🎊 Nearing 200th Kaizen Post – We want to hear from you! Do you have any questions, suggestions, or topics you would like us to cover in future posts? Your insights and suggestions help us shape future content and make this series better for everyone.Client Script | Update - Introducing Commands in Client Script!
Have you ever wished you could trigger Client Script from contexts other than just the supported pages and events? Have you ever wanted to leverage the advantage of Client Script at your finger tip? Discover the power of Client Script - Commands! Commands
New to Zoho TeamInbox?
Zoho TeamInbox Resources
Zoho CRM Plus Resources
Zoho Books Resources
Zoho Subscriptions Resources
Zoho Projects Resources
Zoho Sprints Resources
Qntrl Resources
Zoho Creator Resources
Zoho CRM Resources
Design. Discuss. Deliver.
Zoho Show Resources
Get Started. Write Away!
Writer is a powerful online word processor, designed for collaborative work.
Zoho CRM コンテンツ
-
オンラインヘルプ
-
Webセミナー
-
機能活用動画
-
よくある質問
-
Ebook
-
-
Zoho Campaigns
- Zoho サービスのWebセミナー
その他のサービス コンテンツ
Nederlandse Hulpbronnen
ご検討中の方
Recent Topics
Has anyone created a public ASAP Guide that I can check out?
I am thinking of adding an ASAP guide to my web application, but I have noticed that the ASAP widget itself can be really slow to load sometimes. Has anyone created a public ASAP Guide that I can check to see how performant it is? I don't want to spendZoho Desk Partners with Microsoft's M365 Copilot for seamless customer service experiences
Hello Zoho Desk users, We are happy to announce that Zoho Desk has partnered with Microsoft's M365 to empower customer service teams with enhanced capabilities and seamless experiences for agents. Microsoft announced their partnership during their keynoteWhat’s New in Zoho Analytics – September 2025
Hello Users!! In this month’s update, we’re raising the bar across multiple touchpoints, from how you bring in data, plan and track projects to how you design and brand your dashboards. We’ve added the all-new Gantt chart for project visualization, expandedZoho MCP has no tools for Creator or 3rd Party Apps?
I don't see a Zoho MCP community forum so putting this here. Two big problems I see: 1) Although Zoho advertises "over 950 3rd party apps" as available through their MCP, when I go to "Add Tools" there are ZERO 3rd party apps available to choose from.Zoho Forms - Zoho Drive connection - Shared Drives not supported
Hello i am stuck with Google Drive Connection There is no supported shared drives Connection is not support shared drives boolean Query Parameters - supportsAllDrives=true&supportsTeamDrives=true to activate fetch files from the shared drives. Ahat needApply Advance option not shown in report
We are facing an issue in Zoho Expenses. While approving an Expense Report, the "Apply Advance" option is not appearing under the three dots (More Options). Details: Module: Expense Reports Issue: "Apply Advance" option not visible Status of Report: AwaitingCan't create package until Bill created?
I can't understand why we cannot create a package until a Bill is created? We are having to created draft Bills to create a package when the item is received, but we may not have received a Bill from the supplier. Also, Bill # is required, but we normallyWhats the Time out Limit for API Calls from Deluge?
Hi Creator Devs, We are making API calls to third party server via Deluge. Getting this error message: Error at line : 24, The task has been terminated since the API call is taking too long to respond. Please try again after sometime. Whats the defaultCommunity Digest Agosto 2025 - Todas las novedades en Español Zoho Community
¡Hola, Zoho Community! Agosto llega a su fin y septiembre nos trae aire fresco a la comunidad: más inteligencia con IA, actualizaciones que elevan la productividad y la recta final hacia Zoholics España 2025. Aquí tienes lo más destacado del mes paraTip #3: How to change your booking page language
Displaying your booking page in your target audience's language can greatly increase customer satisfaction. By speaking their language, you will help customers feel more comfortable scheduling with you and create a stronger connection with them. Let'sHow can I optimize a Zoho Site page for SEO when embedding external menu or restaurant links?
Hi everyone, I’m experimenting with building small content hubs on Zoho Sites and want to make sure I’m doing it in an SEO-friendly way. For example, I tried creating a page that highlights restaurant menu items and linked out to a resource like this:Diff signature for compose new email and replies
Hi, How do i have different signature for replies and new emails. its inconvenient to have one large signature for replies. Usually on Outlook we have the option to keep separate signatures for new emails and for replies.Zoho Website Site Speed Up & Setting
We are experiencing slow loading speeds on our Zoho website and would like assistance in optimizing its performance. Kindly review the site and suggest or implement necessary improvements to enhance speed, especially related to: > Caching mechanisms >Clickjacking: Zoho Vault's Response
Issue Password manager browser extensions are found vulnerable to clickjacking security vulnerabilities that could lead attackers to steal account credentials, TFA codes, card details, under certain conditions. Reported by Marek Toth, Independent SecurityNo option for pick up in Zoho Books / Inventory but yes on commerce
Is it planned to release soon on books/inventory?Zoho Books - France
L’équipe de Zoho France reçoit régulièrement des questions sur la conformité de ses applications de finances (Zoho Books/ Zoho Invoice) pour le marché français. Voici quelques points pour clarifier la question : Zoho Books est un logiciel de comptabilitéBlueprint Issue - Being able to set a subform field as mandatory
I'm creating a blueprint. My record involves a subform which is only shown once field is set but the field gets set in step two of the process. My problem - I can't save the record as the subform field is set to mandatory - If I unset the mandatory field,Blueprint - Mandatory file upload field
Hi, File upload (as we as image upload) field cannot be set as mandatory during a blueprint transition. Is there a workaround? Setting attachments as mandatory doesn't solve this need as we have no control over which attachments are added, nor can weZoho Books - Include Quote Status in Workflow Field Triggers
Hi Zoho Books team, I recently tried to create a Workflow rule based on when a Quote is Accepted by the customer. This is something which I thought would be very easy to do, however I discovered that Status is not listed as a field which can be monitoredZoho Books - Show Related Sales Orders on Quotes
Hi Books team, I've noticed that the Quotes don't show show the related Sales Order. My feature request is to also show related Sales Orders above the Quote so it's easy to follow the thread of records in the sales and fulfilment process. Below screenshotAdd VAT/Tax line to bank adjustments
When categorising transactions and matching bank feeds with transactions such as customer payments, we use the "Add Adjustment" to add things like fees/bank fees. It would be useful to choose a VAT/Tax rate here. Whilst there is a bank charges option when adding a payment, this goes into the default bank charges account. We use the adjustments so that we can choose the account and separate our fees. We use different card providers and Worldpay charges VAT so we are stuck. We cannot integrate withNew Menu Layout Feedback
I'd really like to see the banking item back on the top of the menu. I'm sure part of it is just because that's what I'm accustomed to. However, for a bookkeeping program, I think there's a logic to having banking be on top. Not a giant issue, but somethingHow to use Rollup Summary in a Formula Field?
I created a Rollup Summary (Decimal) field in my module, and it shows values correctly. When I try to reference it in a Formula Field (e.g. ${Deals.Partners_Requested} - ${Deals.Partners_Paid}), I get the error that the field can’t be found. Is it possibleForm Accessibility
Hi, is there an update on the accessibility standard of Zoho forms? Are the forms WCAG 2.1 AA compliant?Cannot schedule report delivery
The only 'send option' available when exporting reports is 'immediately' The option to schedule the report is missing.adding attachment in sendmail script where attachment is in a CRM field
Hi all, I have a custom field of type 'File Upload' in one of my modules in my CRM. I want to include the file in that field as an attachment to an email - which is done from a button on the 'Results' module. I have created a script and a button to initiate an email from that module. The Deluge scripting window has allowed me to add arguments for all the fields I need to use except for the one file upload type field. My script currently looks like the below (content of the email omitted). As youSignature field is showing black
Hello, When customer signed the service form, it is showing as below picture Phone model: iPhone 16 Pro We tried delete and install application, but it not solved. This has on phone of a few person. There is any advice to solve this?[Free Webinar] Learning Table Series - AI-Enhanced Insurance Claim Management in Zoho Creator
Hello Everyone! We’re excited to invite you to another edition of Learning Table Series, where we showcase how Zoho Creator empowers industries with innovative and automated solutions. Struggling with lengthy claim processes, a lack of visibility intoHow to update changed purchase account of item in invoice
I have selected the wrong purchase account for various articles and created invoices. I had to adjust the purchase account in the article afterwards, but the old purchase account is still posted in the transaction-journal of the invoice. To adjust theZoho Suite is very slow
Since today Zoho is incredibly slow over all applications! What's going on?Not sure how to use credits to my account
Hi I have a $50 credit to my account. I'm just wondering how I can apply that to either a current invoice or to try a new service. Any advice would be great, thanks. Kind Regards ChrisControl who sees Timeline and Interactions in Zoho CRM through Profiles
The feature has been enabled for all DCs (except US, EU, and IN DCs). We will be rolling it out to the other DCs in the upcoming days. Dear All, In a CRM, not all users would require access to the history of a record. For instance, a Marketing OperationsZoho Desk Integration - Add the option to send the estimate from the Zoho Desk Ticket Integration
Hi, Currently in the Zoho Desk integration, the user is able to create an estimate from a ticket, once the estimate is created the user can see the estimate under the ticket (see screenshot below), but is not able to send that estimate from Zoho Desk.Utilisation de Zoho en conformité avec l’article 286 du Code général des impôts (CGI)
Cher(e) client(e), Conformément à l’article 286 du Code général des impôts (CGI) impose aux entreprises assujetties à la TVA d’utiliser des systèmes de caisse ou de gestion commerciale certifiés lorsqu’elles enregistrent des ventes à des particuliers.Issue showing too many consultations in my workspace link.
Hi Team, I’ve set up two Workspaces to track meetings from different sources. So far, this has been working well, and the two Workspaces are differentiated without any issues. However, when I navigate to Consultations and share the link to my personal👋 Welcome to the Zoho MCP Community
Hello all, glad to have you here! This is your space for everything AI agents, MCP tools, and intelligent business apps. This community is for you — developers, partners, creators, and businesses exploring how agents can transform work. Whether you’reCRM Validation Rules Support Only Single Condition
Simply put, CRM validation rules support only a single condition for each field on "All Records". You also cannot specify additional validation rules on the same field because it has already been used in an existing validation rule. The ONLY solutionUnapproved Leaves are hard to distinguish in Attendance View
This is a an unapproved leave request It appears in the Attendance view without any visual indicator if its approved or not For a whole day request this might be manageable but for hourly requests it gets very hard to know which are approved, which arePerformance Appraisal Probation Period
Hello All, Is there any possible way to create an appraisal cycle for new staff members, at the end of probation period? Many thanks!Zoho Creatorの一括操作における処理の同期/非同期について
現在、Creatorのレポート機能を利用して、複数のレコードに対して一括で処理を実行しようとしていますが、処理の実行順序について確認したいことがあります。 レポート内の複数レコードに一括で処理を実行した際、処理は同期的に行われるのでしょうか？それとも非同期的に行われるのでしょうか？ 【同期処理の場合】 レコード①に対する処理が開始され、終了後にレコード②に対する処理が開始され、最後にレコード③に対する処理が実行されるように、処理が順番に行われる場合。 【非同期処理の場合】 レコード①、レコード②、レコード③の処理が一斉に開始され、それぞれ並行して処理が行われ、全処理が終了する場合。Next Page